Recommended Posts

Right - Well I just basically spent two days reading up on unRAID solidly, I've purchased it and am currently preclearing my disks with the script prior to getting the array back online. Should be done in 6 hours but I'll be asleep by then, so I'll migrate the Data back to the Server tomorrow.

Setup will be:

250GB /dev/hdb - Data

2000GB /dev/sdb - Data

2000GB /dev/sdc - Data

2000GB /dev/sdd - Data

2000GB /dev/sde - Parity

My understanding is I'll need to upgrade the Parity Drive before I can expand those other disks beyond 2TB, so I'll need a way of identifying that drive in the MicroServer, or I'll just boot a LiveCD on a USB and find which drive has a bizzarre FileSystem on it.

Next upgrade will be 4000GB drives, but that won't be till mid-next year.

So you going to run it vm with rdm, or going to use the whole thing as just unraid?

Yeah your parity drive has to be as large as your largest data disk. So if you want to go with bigger than 2TB data, then you will need to update your parity to 2.5 or 3, etc.

I'm currently trying out FlexRAID for my data protection needs. Irreplaceable files are on 3 computers at 2 different locations. My media files are all stored on my desktop and I just installed FlexRAID and installed another 3TB drive to be used as parity.

You only need one parity drive as large as the biggest drive to be protected. That way if any one drive dies, I can replace it and recover. The only issue is when multiple drives die. That will result in data loss, but the files aren't important and can be replaced if needed. Since it's not real RAID, only the data on the dead drives is lost. If the parity drive and one other drive die at the same time, I only lose one drive's worth of data. If two data drives die, then both are lost and the parity data is useless.

I find that one $120 drive is a great balance point between safety and cost effectiveness. The odds of two drives dying at the same time is pretty low and the data is replaceable, so it's a risk I'm willing to take.

Just one thing to note, when running iPerf to the new unRAID Server I'm seeing approx 120MB/s speeds over the network, so it's maxing out Gigabit easily!

When writing to the array, i'm maxing out at 10MB/s with it occasionally jumping to 40MB/s for a few seconds...

Any ideas?

You need a cache drive ;) This is known issue with unraid that writing is slow.. So a cache drive allows you to get full write speed to one spindle while it then moves the files to your parity array after.

In your one setup I would prob make your 250GB drive a cache drive.

Interesting I was wondering what kind of I/O hit unraid would have. Also, are those 5400 or 7200 rpm drives? Would having a 10k or ssd for caching be better?

I was just thinking the same thing, but I cannot justify the cost of upgrading the cache drive right now. All drives are 7200rpm. a 256GB SSD would be great for a cache drive, but thats just too expensive right now.

Well to me write speed is not all that important if your using it to serve up your media from, read is what matters it serving up your HD media. If you moving lots of data at once sure than a 250GB SSD might be in order, but something like even 32 or 64 would be very useful into just getting your new files there and then forgetting about them as they get moved over to the parity array.

Well, I'm slowly learning my way around this OS, and the Cache drive is helping to a degree, but only being able to add 250GB of Data at a time is becoming a pain. But then it's not every day I'll be migrating ~2TB over to this server.

"to enable AHCI on the other ports on the server"

Didn't we talk about this before?? Thought you had the current bios that allowed this, or wait this is your N36L, you also have a N40L as well? So this is older model that did not have the current bios or bios hack. Did they not enable it in the standard bios like they did for the N40L?

Did they not enable it in the standard bios like they did for the N40L?

No, the N36L needs a patched/hacked BIOS to enable that, and after flashing it is still disabled. You need to go in and enable it.

Budman, any thoughts on Storage Spaces with Windows 8? Have you played around with it? I'm thinking of wiping my WHS2011 install on the N36L and going with win8. The main use of the server was as a NAS.

  • 3 weeks later...

Nice to see you've finally gone over to unRaid! If you've got any questions I'm happy to give it a bash.

Bare in mind if you're using your cache drive the data isn't moved off of that drive until around 3am. So while on there it isn't backed up or protected.

I don't have this issue as I don't have unRaid running with a Parity drive.

No I have not played with w8 spaces as of yet, I have fired up a couple of the beta's - and to be honest the UI was so off putting I have not bothered to dig much deeper. Because I can tell you this for sure, if there is no way to use the standard desktop - your not going to see many companies move to this version any time soon.

Most enterprises don't move their users until sp1 of new OS anyway, sure you will have a few beta testers in IT dept, etc. But not a major move - you would not believe the issues users have with just the simple office ribbon when that changed. Changing the UI, yeah companies are not going to like that at all! So got plenty of time to get up to speed with it. Not like its going to be mainstream for months and months, if not years after it releases.

**** lots of companies are still on XP ;)

As to " I don't have unRaid running with a Parity drive. " What?? You meant "cache" drive right - I don't think its possible to run unraid without the parity drive?? If so please point this out!

This topic is now closed to further replies.
  • Posts

    • Dragon's Dogma 2: Dark Arisen expansion to bring snowy region, new updates also coming by Pulasthi Ariyasinghe Capcom had a surprise waiting for Dragon's Dogma fans today in the Nintendo Direct presentation. The company revealed an expansion for the second installment with a name that should be familiar to series veterans. Coming later this year, Dragon's Dogma 2: Dark Arisen is promising a massive new region to explore, new monsters, fresh skills to learn, and more. The studio says players will be heading to the Northern region of the world, named Norgan, to find new secrets about an undying "Fallen Dragon." There will be forgotten relics that the protagonist can find to unlock fresh weapons and skills the expansion is introducing. Players will also be able to find mysterious equipment from a previous Arisen as a part of the expansion, all part of 12 Lost Rites Dungeon Challenges they must complete to gain access. In Neowin's own review, I found Dragon's Dogma 2 to be an impressive RPG when it launched back in 2024, giving the title an 8.5/10 for its class variants, companion system, and immersive exploration. "Once a prosperous region of the kingdom of Vermund, it was abandoned many years ago for reasons unknown," says Capcom about the new region. "Long has it been since any soul traveled its paths. Blanketed in heavy snow, these frigid lands are home to savage hordes and creatures of unbelievable power. Those who are capable of vanquishing such fearsome foes, or those who possess a keen eye for exploration, will find themselves rewarded with powerful relics." Dragon’s Dogma 2: Dark Arisen expansion launches on October 9, 2026, with a $29.99 price tag. Ahead of the expansion release, Capcom is also planning to release two free updates to the base game. The first will land tomorrow, June 10, bringing more accessible fast travel with an Eternal Ferrystone and other quality-of-life adjustments. The second update will land sometime in August, aiming to improve frame rates, add more save slots, and bring even more community-requested adjustments. This expanded Dark Arisen edition is also launching on the Nintendo Switch 2 on the same day the content comes to PC, Xbox Series X|S, and PlayStation 5.
    • Classic themes are just the colors on the bar like the olden days, if you use the image themes, it does fancy transparent backgrounds and it makes the elements of the app look like they are transparent bubbles. This sample image shows what it looks like.  
    • Good point, unfortunately. NextDNS has far more filters and workarounds than uBlock, and it's easy to implement.
    • Windows 10 KB5094127 Patch Tuesday improves File Explorer search and more by Taras Buria The June 2026 Patch Tuesday updates are here, bringing mandatory patches to users with PCs enrolled in the Extended Security Update program for Windows 10. Microsoft is rolling out KB5094127, with build numbers 19045.7417 and 19044.7417. Changelog includes the following: [File Explorer] This update improves File Explorer search, including support for Chinese text, and UTF 8–encoded files without a byte order mark (BOM). Text now displays more clearly and consistently across search results, Content view, and tooltips. [Secure Boot] This update enables dynamic status reporting for Secure Boot states in Windows Security App. This update adds a new policy setting, LimitSecureBootRequiredServiceData, under Computer Configuration > Administrative Templates > Windows Components > Secure Boot. When this setting is enabled, Windows limits the Secure Boot service data it sends by suppressing the event normally sent to Microsoft. This policy is also included in the Windows Restricted Traffic Limited Functionality Baseline package. For information about the policy, see Manage connections from Windows 10 and Windows 11 operating system components to Microsoft services. With this update, Windows quality updates include additional high confidence device targeting data, increasing coverage of devices eligible to automatically receive new Secure Boot certificates. Devices receive the new certificates only after demonstrating sufficient successful update signals, maintaining a controlled and phased rollout. As for known bugs, Microsoft has the following to say: A workaround is available in the official documentation. Today's updates are available for PCs enrolled in the Extended Security Updates program only. If your PC is eligible, you can download the update from Settings > Windows Update or from the Microsoft Update Catalog here.
    • Then the solution is to not let children have easy access to smart phones or internet until they are older, not mass surveillance. Only this would require parents to do actual parenting, most likely, as with any good solution to the problem.
  • Recent Achievements

    • Week One Done
      rubentuben8 earned a badge
      Week One Done
    • Week One Done
      ARaclen earned a badge
      Week One Done
    • One Year In
      jojodbn earned a badge
      One Year In
    • One Month Later
      jojodbn earned a badge
      One Month Later
    • Week One Done
      jojodbn earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      523
    2. 2
      PsYcHoKiLLa
      231
    3. 3
      +Edouard
      124
    4. 4
      ATLien_0
      87
    5. 5
      Steven P.
      83
  • Tell a friend

    Love Neowin? Tell a friend!