Snapped SATA Connection on HDD, Can i replace with this?


Recommended Posts

Hey All,

When pulling out a sata cable from a hard drive, i was a bit to forceful and have broken the plastic connection from the hard drive, as you can see here...

ovZ54l.jpg

I'm wondering if i can unscrew the circuit board from the back of this hard drive and replace it with a known good working one off a drive of the same make?

This is the current drive...

uAhVOl.jpg

This is the spare drive...

1aemRl.jpg

And here they are side by side, will the circuit board on the right hard drive work on the one on the left?

aOn1Jl.jpg

I haven't done anything like this before to a hard drive so im very worried about this.

Thank You!

Nope it probably won't work.

You could probably get a replacement header, desolder the old one and replacement it but afaik it's all SMD soldering, so probably easiest to get someone else that's skilled to do it.

I'd probably say to attempt swapping the PCBs if they were both 500GB drives, but since one's 500GB and the other is 250GB, no, it won't work at all. The BIOS will see the drive as being a 250GB drive since that's what that PCB's firmware is for, so even if it did manage to function, your data would likely be screwed. I wouldn't bother.

Do you not have the old piece of plastic that snapped off? I'd personally attempt to glue it on and if I had to, glue a SATA cable in place.

You don't want to touch the srews on a hard drive. Without the correct torque on the screws it will destabilize the whole hard drive and it won't work at all.

Maybe you could glue a sata cable to the surrounding plastic as it seems the actual connector is intact.

I do have the plastic bit, it looks awkard to get it back in place and i dont want to get glue on the pins!

I have found this spare drive... its a 500GB but its firmware says HP12 though, hmmm im tempted to try, its only because this is my main machines hard drive thats all, i do have a backup, i just want to save myself the time of reinstalling everything if possible.

CK1m8l.jpg

i accidentially snapped a SATA connector, what i ended up having to do was Super Glue the plastic back aganst the metal, then transfered the data off it quick to another drive

i accidentially snapped a SATA connector, what i ended up having to do was Super Glue the plastic back aganst the metal, then transfered the data off it quick to another drive

I did something similar, I hot-melt glued a sata cable onto the drive and its been working perfectly for years (its on my secondary system with non-important data, so I was fine experimenting)

Just plug in the other drive (or any other drive you want to replace it with) without changing any PCBs around, then just restore your data from backup.

Thats the last resort imo, i want to try and fix it first, if it doesnt work, then ill restore the data onto a new drive, not one of these spares.

It won't work. You need to find another drive or PCB that's exactly like what you have. The firmware # also needs to be the same.

Depending on how long you have used the drive, finding the nearly exact PCB match may not work either, especially on modern drives. Modern drives store unique calibration data. As the drive ages, the calibration data becomes even more unique. The best chance to do a PCB swap is when the differences between the calibration data are as small as possible (in other words, when the drives are brand new).

If i try and replace the board, with that spare drives one, is there a chance it will corrupt / blow up the drive beyond repair?

They don't even match. Of course, you are gonna have a bad time.
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • I have updated my Series 9 Watch so I assume there is either a mistake in what was said, or as suggested - the new AI feature set isn’t supported on anything other than those listed above.
    • WhatsApp slams Isreali firm, NSO Group, for trying to spy on its users by David Uzondu WhatsApp has come out accusing Israeli cyber-intelligence firm, NSO Group, of deploying a fresh wave of highly targeted "spear phishing" attacks against users, which its security teams successfully thwarted. The Israeli firm, according to WhatsApp, ran this operation like its usual one-click phishing campaigns, trying to get people to click malicious links that lead them to external sites. To coordinate the campaign, the spyware vendor created fake test accounts and groups on the messaging app. WhatsApp said it is sharing the specific malicious domains, ikhwancast[.]com, ghazacast[.]com, and fr24cast[.]com, because potential victims need this data to check if they were targeted across other messaging systems or email platforms. The NSO Group is infamous for creating and selling Pegasus, a military-grade commercial spyware capable of silently compromising smartphones simply by sending a message or placing a missed call via apps like WhatsApp or iMessage. Users do not even have to interact with the incoming notification before the infection takes hold. Once Pegasus manages to break in, the spyware harvests private data, letting operators read private messages, emails, photos, and documents. It also tracks precise GPS locations, records keystrokes, activates the device's camera, and monitors live microphone audio. Independent investigations by cybersecurity watchdogs like The Citizen Lab and human rights organizations like Amnesty International have proven that governments use this software to track humanitarian workers, journalists, diplomats, and political dissidents. These findings directly contradict NSO Group claims that clients use the technology to spy on criminals and terrorists only. In late 2021, the U.S. Department of Commerce added the firm to its Entity List, effectively banning the vendor from buying hardware and software from American tech companies. WhatsApp said in its blog post that the spyware vendor violated a permanent court injunction with this new spear-phishing campaign. This injunction, which took effect in 2025, strictly prohibited NSO Group from targeting WhatsApp and its users. The platform is now asking a federal court to hold the firm in contempt.
    • It would be surprising if even 3 year old Apple Watches (and not SE models at that) cannot run watchOS 27. Granted, it doesn't mean it would work as well. We'll see.
    • Apple launches new website for parents and a revamped Screen Time experience by Aditya Tiwari At WWDC 2026, Apple announced new parental control features for iOS 27, iPadOS 27, and macOS 27 to keep kids' device usage in check and keep them safe online. As a parent, you'll get access to a simpler setup experience, Ask to Browse, Time Allowances, and a redesigned Screen Time. You'll be able to pick exactly which apps your child can access on their device, choosing from just a few essential apps, a curated set, or the apps you feel are appropriate. There will be an option to gradually add more apps. Ask to Browse is a new feature that requires kids to request permission before visiting a new website in Safari on iPhone, iPad, or Mac. You can also turn on a setting that requires your kid to ask for approval before connecting with an unknown contact via Messages, FaceTime, or the Phone app. You can manage your child's screen time more effectively with Time Allowances that work across categories, including Games, Entertainment, and Social Media. You can set time limits based on your kid's age and get suggestions informed by expert research. Speaking of expert guidance, Apple added that it's working with the American Academy of Pediatrics (AAP) to adapt its Family Media Plan to create a guide parents can refer to when using Apple products. Moreover, the company has also set up a new dedicated website, where you can find tools, resources, and answers to common questions around parental controls and child safety. Apple also allows parents to set daily schedules to manage screen time, configuring access to different apps at different times of the day and across the week. Overall, the Screen Time section has been revamped and provides a bird's-eye view of your kid's average device usage and most-used apps. "For example, to help protect important family moments, parents can quickly limit access during meals, outdoor play, and other times that deserve full attention. If kids need a little extra time to finish something in an app, parents can also easily extend access," Apple said. Apart from these, Communication Safety has been updated to block gore or violent content when detected in shared images or videos. The feature already blurs nudity in Messages and FaceTime calls, and is enabled by default for users under 18.
  • Recent Achievements

    • Very Popular
      Captain_Eric earned a badge
      Very Popular
    • One Month Later
      amusc earned a badge
      One Month Later
    • One Month Later
      DJC50PLUS earned a badge
      One Month Later
    • Week One Done
      DJC50PLUS earned a badge
      Week One Done
    • Proficient
      Eric Biran went up a rank
      Proficient
  • Popular Contributors

    1. 1
      +primortal
      514
    2. 2
      PsYcHoKiLLa
      231
    3. 3
      ATLien_0
      87
    4. 4
      +Edouard
      84
    5. 5
      Steven P.
      80
  • Tell a friend

    Love Neowin? Tell a friend!