How do you power your Xbox wireless controller?


Recommended Posts

I've only just realised that they discontinued their rechargeable battery packs and it sucks because over the last few weeks, three of mine have stopped holding charge :(

So what are the alternatives? And what do you guys prefer?

I own the play and charge kit and the quick charge kit, so was hoping for some recommendations of products that would work with these :p

Umm.. what ?

I see them on Amazon and other places for sale.. [ http://www.amazon.com/Xbox-360-Rechargeable-Controller-Battery-Black/dp/B000OYIVGM ]

I use that, or keep it wired.. I have a USB extension cable that means I can reach anywhere in my room that I would be interested in playing from..

I've always used 'Play and Charge' kits. However, I haven't had much success with third party charging cables. The last one I used caused a short-circuit. The Battery was fine though. ... Can't really get that wrong. Just a couple of rechargeable AA's in a pack.

In short, you can use any controller charging cable with any rechargeable battery pack.

The USB cable from the play and charge kit at the moment, the battery's are useless :/ I replaced 3 of mine with official battery packs and all but 1 of the battrey packs stopped holding charge again after 6 months...

I'm tempted to just buy some good rechargeable batteries.

Umm.. what ?

I see them on Amazon and other places for sale.. [ http://www.amazon.co...k/dp/B000OYIVGM ]

I use that, or keep it wired.. I have a USB extension cable that means I can reach anywhere in my room that I would be interested in playing from..

Ah not here in the UK, the only one's that I've ever managed to find are either Used, third party or new but way over priced.

I've always used 'Play and Charge' kits. However, I haven't had much success with third party charging cables. The last one I used caused a short-circuit. The Battery was fine though. ... Can't really get that wrong. Just a couple of rechargeable AA's in a pack.

In short, you can use any controller charging cable with any rechargeable battery pack.

Ah so I can buy a few rechargeable batteries and use them with my own play and charge kit? Sweet

Ah so I can buy a few rechargeable batteries and use them with my own play and charge kit? Sweet

Well, I'm not so sure about just throwing in rechargeable batteries by themselves. I was referring to third party battery packs. There is a contact on the back of the controller that these battery packs interface with... I think that's where the connector at the top of the controller charges the battery packs.

From when I bought my xbox (2006) to probably last year or so, I used the play-and-charge kit. But the battery stopped holding a charge. Since then, I've used normal rechargeable batteries. I bought a 4 pack and I already had a charger. So when 2 die, I switch the ones in the charger for the ones in the controller, and repeat. 10 bucks for 4 batteries has lasted me plenty long enough already and they don't seem to be losing charge. So I think it's more cost effective than the official p/c kit.

Play and Charge kits all the way, but only official MS ones. I've got 2 official both are brilliant still working strong after years, got 2 un-official and they're S**T, one holds no charge at all, the other about 2 mins...

The key as with most batteries is to not charge them when they're half charged.

I had one, which kept loosing it's charge after 5-6 months.

Emailed Microsoft and they sent me a replacement free :) If you've got one, ring Microsoft there very good for returns :D

I had a old keyboard and broken one of the legs, I rang Microsoft up to see if I could get a replacement leg and they sent me a brand new keyboard :)

Official Recharge pack w/ Charging station.

Periodically they seemed to not hold a charge, then I let it discharge completely with use on the controller, then recharge it using usb cable to controller which fixes that for a while.

I suspect it's due to the base doing a rapid charge, and the usb cable does trickle charge.

It seems that loads of folk use the battery packs, why did they get rid of them :(

Think that I may go down the path of buying myself some rechargeable batteries and stick with those as long as possible. Shame.

I use a Venom Twin Charging dock that you sit two controllers on. It comes with it's own re-chargeable batteries with special connectors on the back that connect to the dock. The batteries work quite well, hold their charge for ages... several days at least at a couple of hours a day (dunno really as I dock them controllers most of the time).

http://www.amazon.co...k/dp/B00284AI3K

?12.29 for the dock AND two re-chargeable battery packs.

81PPmESX0nS._AA1500_.jpg

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • The possibility that milk gathers back into a glass implies that gravity can be 'reversed'.
    • VidCoder 12.20 by Razvan Serea  VidCoder is a DVD/Blu-ray ripping and video transcoding application for Windows. It uses HandBrake as its encoding engine. Calling directly into the HandBrake library gives it a more rich UI than the official HandBrake Windows GUI. VidCoder can rip DVDs but does not defeat the CSS encryption found in most commercial DVDs. You’ll need the NET 8 Desktop Runtime. If you don’t have it, VidCoder will prompt you to download and install it. The Portable version is self-contained and does not require any .NET Runtime to be installed. You do not need to install HandBrake for VidCoder to work. Feature list: Multi-threaded MP4, MKV containers Completely integrated encoding pipeline: everything is in one process and no huge intermediate temporary files H.264, H.265, MPEG-4, MPEG-2, VP8, Theora video Hardware-accelerated encoding with AMD VCE, Nvidia NVENC and Intel QuickSync AAC, MP3, Vorbis, AC3, FLAC audio encoding and AAC/AC3/MP3/DTS/DTS-HD passthrough Target bitrate, size or quality for video 2-pass encoding Decomb, detelecine, deinterlace, rotate, reflect, chroma smooth, colorspace filters Powerful batch encoding with simultaneous encodes Customizable Pickers to automatically pick audio and subtitle tracks, destination, titles and more Instant source previews Creates small encoded preview clips Pause, resume encoding VidCoder 12.20 changes: Updated HandBrake core to 1.11.2. Download: VidCoder 12.20 | 47.0 MB (Open Source) Download: Portable VidCoder 12.19 | 89.3 MB Link: VidCoder Home Page | Github | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Too soon, I'm still not over this death!
    • Normally, I admit when a title is clickbait (unfortunately, it's become somewhat necessary to compete against AI-dominated news sections today), but in this case, all supported versions is implied and doesn't need to be spelled out in the title. Of course, I'm covering a Patch Tuesday update bug that is only available to supported Windows SKUs. All our coverage relates to supported Windows software and SKUs only unless we expressly state that it's "unsupported", "unofficial", or "third-party". I'm sorry, but supported/official SKUs don't need to be spelled out as such in every Neowin headline.
  • Recent Achievements

    • Week One Done
      Jordan Smith earned a badge
      Week One Done
    • Reacting Well
      BizSAR earned a badge
      Reacting Well
    • First Post
      AndreaB earned a badge
      First Post
    • Week One Done
      Huge Trailer earned a badge
      Week One Done
    • Week One Done
      Classifyskilleducation earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      593
    2. 2
      +Edouard
      185
    3. 3
      PsYcHoKiLLa
      77
    4. 4
      Michael Scrip
      73
    5. 5
      Steven P.
      66
  • Tell a friend

    Love Neowin? Tell a friend!