HELP! Windows 8 won't install!


Recommended Posts

I just tried installing as the drive detection before you install windows 8 shows a "volume" and a "partition" which windows 7 does not do:

2ppdetk.jpg

I tried formatting the partition and then installing but at the end of the installation i get this:

2vc6r8j.jpg

says: "windows could not update the computer's boot configuration. Installation cannot proceed."

1z4fkhj.jpg

Here is my laptop specs:

Intel Core i5 m430 2.2ghz

6gb ddr3

Chipset: Intel HM55

Win7 setup just shows a 100mb partition, 41.5gb partition and my storage drive 424.2GB.

PLEASE HELP as i formatted my win7 installation now, having to borrow another laptop temporarily.

Link to comment
https://www.neowin.net/forum/topic/1099075-help-windows-8-wont-install/
Share on other sites

Boot from 7 or 8 DVD and goto Repair console > Command Prompt (Hit enter after each line)

---

diskpart

list disk

select disk x (x = being the disk number of your HDD)

clean

create partition primary

active

format fs=ntfs quick

assign

exit

Reboot and try setup again (I use this for USB drives, but they are not partitioned, I imagine this will kill all partitions on the disk and create just one new one)

I just tried formatting the 100mb partition then installed it on the 41.5gb partition again, didn't help.

I am using an iso from msdn btw not an earlier leaked image. I'll try and install windows 7 and format the 41.5gb partition and then try win8 installation again. I don't want to the commands a few posts up as i need the data on the 424gb partition.

I would suggest deleting the 100MB partition.... I'm guessing its an OEM partition that's probably f-ing things up?

can't delete it, can only format it:(

Now win7 setup see's all those 5 partitions and volumes too instead of just 3 partitions :( I tried formatting the 100mb and 41.5gb from win7 installation then exited and starting win8 installation, will see if it works this time. I doubt it. Will try installing win7 if it doesn't work.

If you don't need anything on the drive anymore then go to repair on the disc, open a command console, then run DISKPART.

Type "LIST DISK" and find the disk number for the drive you want, then type "SELECT DISK x" and "CLEAN".

Fair warning: there are no prompts. It will instantly wipe the drive's partition table.

I just tried formatting the 100mb partition then installed it on the 41.5gb partition again, didn't help.

I am using an iso from msdn btw not an earlier leaked image. I'll try and install windows 7 and format the 41.5gb partition and then try win8 installation again. I don't want to the commands a few posts up as i need the data on the 424gb partition.

Boot a live Ubuntu CD and use gparted I think its called, to delete the partition you want to use for 8

Can you not select each partition and click on 'Drive Options (Advanced)' and you should be able to delete each partition there and start with a fresh install.

it won't let me.

I've never had any of these problems before with win7 but now in the win7 and win8 setup.

Boot a live Ubuntu CD and use gparted I think its called, to delete the partition you want to use for 8

yeah i've already thought about booting up ubuntu if win7 can't install. Either that or put the 2.5" hdd in a usb caddy and attach it to the laptop i have borrowed. I'm going to install win7 now if it lets me. I have yet to try the "upgrade" option instead of "custom (advanced)" either.

If i try to format the "volume" 41.5gb i get this message "failed to format the selected partition. [Error: 0x80004005]." but i can format the 41.5gb "partition".

installing win7 now, will see if it can complete.

Run Darik's Boot and Nuke to clear everything on the drive, including the Partitions. (Writing Zero's)

i'm wanting to keep the data on my 424gb storage partition.

yeah i've already thought about booting up ubuntu if win7 can't install. Either that or put the 2.5" hdd in a usb caddy and attach it to the laptop i have borrowed. I'm going to install win7 now if it lets me. I have yet to try the "upgrade" option instead of "custom (advanced)" either.

Yea having the HDD as a secondary drive either from windows or linux will give you the best chance to rebuild the partitions, probably linux would care the least about the drives state and things like permissions that windows might struggle with

Actually, there's a few things here...

First, don't delete the initial 100MB partition. That's basically the stubbed area for Windows to put it's boot info. (It's for bootstrapping. Vista was the first MS OS to do that, Linux has been using /boot for quite some time.) - It will never use the full 100MB, however I'm guessing that 100MB is a nice round number. Most will use 20-25MB.

Looks like you have a volume set up, not a typical partition layout. Any reason why?

To dual boot, the best layout is:

Partition 1 - 100MB (Boot)

Partition 2 - Windows x

Partition 3 - Windows y

I have a number of dual boot Windows 7 and 8 systems now are they are running perfect.

For more info on partitions and types, check this out:

http://en.wikipedia.org/wiki/Disk_partitioning

What are those dynamic disks anyway?

It's a partitioning scheme that lets you use drives more with more flexibility. You can mirror them, extend them to other drives, etc. They can get wonky when you try to install Windows on them, though.

@Kaos: deleting the system partition is fine if you're doing a clean install. Windows Vista+ will create a new one if the drive is blank.

i used to have 3 or 4 partitions and could only do that with dynamic discs. Win7 didn't install, same problem as with win8, i'll try the win8 "upgrade" now, if that doesn't work i'll try ubuntu.

Unless I'm missing something here, you can have as many partitions as you want. The trick is, you can only install Windows on a primary partition, and there can be only max. 4 primaries (or 3 primaries, if you want more than 4 partitions - in this case the last partition serves as a "container" for all the additional ones, that are called logical partitions).

Your best bet is nuking the partition table with gparted and creating them from scratch.

Unless I'm missing something here, you can have as many partitions as you want. The trick is, you can only install Windows on a primary partition, and there can be only max. 4 primaries (or 3 primaries, if you want more than 4 partitions - in this case the last partition serves as a "container" for all the additional ones, that are called logical partitions).

Yeah, i wanted winxp, win7 and ubuntu on it and windows would only allow me to do that with dynamic disks :( I'm going to try ubuntu live usb stick. I just want to delete all partitions except the 424gb partition as i need that data badly.

Yeah, i wanted winxp, win7 and ubuntu on it and windows would only allow me to do that with dynamic disks :(

That should still be doable? Linux distributions, for what I know, have no problems with installing themselves on logical disks - I've done that myself.

Windows XP and 7 would occupy the first 3 primaries.

Another thing to note is (as I remember correctly) if instead of unpartitioned space you choose an existing partition for Windows Vista/7/8 install, it won't create the 100mb partition and instead will assign the boot flag to an existing one.

If you don't have any sensitive data on that disk, I suggest you playing with it some more and exploiting all the options that the fellow forum members gave you.

Otherwise you might want to buy a separate disk for your secondary system, which isn't a half bad idea either - that's how I've been doing it for some time now (the difference being you don't get a bootloader menu but instead choose which disk to boot from the POST screen)

That should still be doable? Linux distributions, for what I know, have no problems with installing themselves on logical disks - I've done that myself. Windows XP and 7 would occupy the first 3 primaries.

think i wanted 1 for storage too. Windows came up with an error message saying you had to use dynamic, tried with easeus partition master too but that didn't help.

just tried ubuntu, i got this error: 2irw7bk.jpg

Windows sees an unformatted hdd when attached to a usb caddy. I WANT TO BREAK DOWN AND CRY!

Getdataback for windows attached via usb caddy seems is able to read my files, HALLELUJAH! there is a god after all. From now on i will make regular backups on dvd's. my lesson has been learn't. I want to kiss the creator of getdataback.

I'm now going to transfer all the files off my hdd then give it a proper format with no stupid dynamic discs anymore. You cannot believe the cold sweat and heavy breathing i've had tonight as i had some extremely important documents on there.

PHEW!

thanks for your help guys.

Windows 8 + dynamic disks = SUICIDE!

I've never found any way to reliably undo the dynamic disk thing. You'll just have to figure out a way to back your files up. :(

All the suggestions involving binhexing the partition table I've found on the 'net have failed miserably.

It's not just Win8... it's dynamic disks in general. If you enable it on your system drive it's pain.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Same Internet Archive seemed to grab the new version https://web.archive.org/web/20...d/Setup_MakeMKV_v1.18.4.exe Here's the link to an additional file it periodically downloads https://web.archive.org/web/20260213092148/https://www.makemkv.com/sdf.bin I think update's keys, etc. To manually trigger this update, put the sdf.bin file in the root of where the program is installed. When you launch the program it will pick up the file and import it. Typically put it here: C:\Program Files (x86)\MakeMKV\sdf.bin
    • Windows 11 KB5094126, KB5093998 bugging out Office apps but it may not be Microsoft's fault by Sayan Sen Microsoft last week released Windows 11 KB5094126 and KB5093998 as the latest Patch Tuesday updates. Following that the company also published the accompanying dynamic updates under KB5094149, KB5095971, and KB5094156. Although the tech giant did not acknowledge any major problems, some users online reported various issues ranging from OneDrive and Dropbox access problems, BitLocker recovery lockouts, to blue screens and BSODs. You can read about them in this dedicated piece. While there is still no confirmation about those problems from Microsoft the company has admitted to another bug which we did not report on. The tech giant has confirmed it has received reports of an issue in which certain third-party applications may be unable to launch Microsoft Office apps or open Office documents after installing the Patch Tuesday. This affects both Windows 11 as well as Windows 10. The company says the problem impacts a subset of applications that rely on OLE (Object Linking and Embedding) automation to communicate with Microsoft Office programs. According to Microsoft, affected scenarios involve third-party software attempting to open Office applications or documents from within their own interface. In such cases, the Office program may fail to launch altogether, or the requested document may not open. Oddly there may not be any error message, which probably makes the issue difficult to diagnose. The bug affects several Office products, including Word, Excel, PowerPoint, Access, and other apps in the Microsoft Office suite when they are launched through the affected software. These include tax and accounting software such as CCH Engagement and Workpaper Manager, dental practice management solutions like Dentrix and Softdent, as well as the popular research and reference management tool Zotero. Microsoft adds that other applications using similar Office integration methods could also experience the same problematic behavior. To understand the issue it is important to look at OLE, the Microsoft technology involved. OLE allows different applications to work together and share data, while its Automation feature lets one program control another. Thus this enables third-party software to launch Microsoft Office apps, open documents, and perform tasks automatically without requiring users to switch between programs. Because many accounting, healthcare, research, and business applications rely on OLE automation to interact with Word, Excel, PowerPoint, and other Office apps, any disruption can break those workflows. As a result, affected software may be unable to open Office documents or launch Office applications even though the programs themselves continue to work normally. At the moment the company has not provided a permanent fix though it has confirmed that engineers are actively working on a resolution, which will be delivered through a future Windows update. As such additional details will be shared once more information becomes available. In the meantime, Microsoft recommends a simple workaround for affected users whic is to open the Office application or document directly rather than launching it through the third-party program. For enterprise customers and organizations managing larger deployments, Microsoft says an additional mitigation is available. Admins experiencing the problem on their managed devices are advised to contact Microsoft Support for business to obtain and apply the workaround.
    • It saddens me when cars are such dull colours now. Mine is bright metallic blue and I absolutely adore it for standing out in contrast to that depressing backdrop of traffic.
    • Sparkle 2.20.0 by Razvan Serea Sparkle is a free, open-source Windows optimization tool designed to make your PC faster, cleaner, and more private. With Sparkle, you can easily debloat Windows by removing unnecessary apps and services, disable Microsoft tracking to enhance privacy, and apply performance tweaks to boost speed. Its cleaner removes junk and temporary files, while every change is safe and fully reversible. Sparkle also features a modern, user-friendly interface with automatic updates, making system maintenance simple. Explore over 39 tweaks, from disabling telemetry and hibernation to optimizing network and game settings, all aimed at customizing and enhancing your Windows experience. Sparkle supports Windows 10 and 11. Sparkle 2.20.0 changelog: Debloat Tweak has animated border New homepage loading UI New Tweak Modal (Markdown Supported) Refactored GPU Detection Added Tests with vitest Added foobar2000 to apps Added Localsend to apps Updated Modal Styles Added styles for disabled inputs Added Animated Border to debloat-windows tweak Bumped dependencies Refactor System info logic for speed Tweak info modals now support Markdown Added Clear System info cache to settings Redesigned Home Page Loading UI Changed Some Icons around the app Download: Sparkle 2.20.0 | Portable | ~100.0 MB (Open Source) Links: Sparkle Website | Github | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • lol it was a typo, fixed! haha imagine an actual 4TB Gen4 NVMe for $40 in 2026
  • Recent Achievements

    • Reacting Well
      Dys Topia earned a badge
      Reacting Well
    • Conversation Starter
      NovaEdgeX earned a badge
      Conversation Starter
    • One Year In
      Console General earned a badge
      One Year In
    • Week One Done
      Twozo Technologies earned a badge
      Week One Done
    • One Month Later
      Twozo Technologies earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      517
    2. 2
      +Edouard
      184
    3. 3
      PsYcHoKiLLa
      106
    4. 4
      Steven P.
      88
    5. 5
      ATLien_0
      68
  • Tell a friend

    Love Neowin? Tell a friend!