Recommended Posts

oooooh indeed.

Im a Forza nut but nothing Ive found on PC has been as good, this however could just tempt me

forze could have been such a good game, if only it was on PC, with a strong community behind it, with modders making it more realistic, could have been an amazing racing simulator, instead its just a mediocre arcade racer

forze could have been such a good game, if only it was on PC, with a strong community behind it, with modders making it more realistic, could have been an amazing racing simulator, instead its just a mediocre arcade racer

:rolleyes:

instead its just a mediocre arcade racer

Actually, that's Forza Horizon. Forza 4 is a mediocre pseudo-sim. It's the most sim-like racing game on the 360 outside of RACE Pro, but it doesn't hold a candle to GT5, and both of those easily get trounced by pretty much every sim on the PC.

Agree with your other points though; Forza does have the strong community behind it, but obviously on consoles, they're limited to creating decals and tuning setups. And that's the joy of the PC world: the players will set out to improve the games in any way possible. Colin McRae DiRT is a good example; there's a mod available to make the game play more like Richard Burns Rally (widely considered the most realistic rally game ever made), so you get the winning combination of the old-school realism plus the modern-day graphics, which is essentially what Project CARS is going to turn out like.

What's even more amazing is when this is finished and released, the console versions will play exactly the PC version (just with worse graphics, and gameplay locked to 30 FPS).

Just tried it. I think i spent the last 2 hours trying to set my wheel up. Now it just refuses to change steering lock. I have full 900 degrees (or 1080 the game reports). I want to limit to at least 360 and logitech profiler refuses to lock it. I think i was fiddling so much that logitech profiler refuses to work now. When i first booted the game i have the lock at 180 and obviously the cars weren't steering correctly.

I'll try again tomorrow, after a reboot. I can't bothered now. Too much rage inside :laugh:

If you need help just say so Lingwo.

Heres a thread that you can give a look @ in order to setup your wheel.

http://forum.wmdportal.com/showthread.php?10906-G25-27-settings-for-default-SETA-tire-model

Pictures of the console version may show up soon.

Actually, that's Forza Horizon. Forza 4 is a mediocre pseudo-sim. It's the most sim-like racing game on the 360 outside of RACE Pro, but it doesn't hold a candle to GT5, and both of those easily get trounced by pretty much every sim on the PC.

Agree with your other points though; Forza does have the strong community behind it, but obviously on consoles, they're limited to creating decals and tuning setups. And that's the joy of the PC world: the players will set out to improve the games in any way possible. Colin McRae DiRT is a good example; there's a mod available to make the game play more like Richard Burns Rally (widely considered the most realistic rally game ever made), so you get the winning combination of the old-school realism plus the modern-day graphics, which is essentially what Project CARS is going to turn out like.

What's even more amazing is when this is finished and released, the console versions will play exactly the PC version (just with worse graphics, and gameplay locked to 30 FPS).

You're probably the only person in the world who considers GT5 a better sim than Forza 4, most serious sim fans considers Forza 3 better than GT5, but anyway.

I don't really think modability is a plus for many game types, racing sims among them since I have yet to see a good mod for them. While some claim to increase realism, I consider the people with pro tool analyzing equipment and the assistance of pro drivers far better than the judgement of a basement modded who at best may have tried a tired and not race timid Ferrari at a track day.

Also, 30 fps on consoles, I have doubts this will be much more realistic in driving than F4 and even if it is, the difference is going to be so small it won't matter, and so small that the fact that F4 runs at 60 is going to be more I portent to the serious sim fan. If they're going to compete as a serious sim race on consoles, they ned to tune graphics to run at 60.

I don't understand the decision to close registrations though, but oh well I have other games to play with anyway.

You're probably the only person in the world who considers GT5 a better sim than Forza 4, most serious sim fans considers Forza 3 better than GT5

...now that's news to me. I have never heard anyone state Forza 3 or 4 to be more realistic than GT5. I've seen a lot of people say Forza 4 is better-looking and more detailed; it's definitely more detailed, but the graphics are subjective, due to the filters used. As for the gameplay, it's a no-brainer. GT5's cars behave more like their real-life counterparts, and there's much less room for error compared to Forza 3/4 (like in real life). A couple of sources to back that up: http://www.caranddri...sport-3-feature - http://www.gtplanet....ad.php?t=122236

Yes, the limiting of Project CARS to 30 FPS on console isn't good (I've constantly posted in the past about the need for racing games to be 60 FPS); I can only assume that the physics engine and everything else controlling the gameplay requires more power than a typical console racer would. But then again, SMS aren't exactly rolling in money making this game; they've got ?4,000,000 to spend on the game itself. EA probably spend that much just on advertising each annual Need for Speed game.

The saving grace will be the gameplay and physics. If it truly is the same as the PC version, then that alone should be enough to ensure the game will be successful. If the next-gen consoles from Microsoft and Sony come along fairly soon (within the next 12 months), then SMS say they may also work on versions for those consoles as well.

The only reason the game is not running at 60 fps in consoles its because they are not capable to handle it. They explained it at the forums many times, just as an example they said that theres no current gen console (including the Wii U) that can handle their 600hz tickrate. Now imagine having a poor console doing all of this while delivering top notch graphics ^^.

If the Xbox 720/Infinity or the PS4 were out, that would be a different story but the longevity they speak so much about is now bitting them in the ass.

About the funding they had a objective of 3.75M euros, they are currently at 700? away from completing it, in order to avoid going over budget they closed it down and currently allow only the existing members to upgrade.

I warned a few posts back about this so cant say that it was unexpected :p

Hmm so your sources are gt fan sites, whereas independent sites no race drivers all agree that Forza beats the crap out of GT5, which is ok. The GT series was never a sim racer, it was always in the more arcade scale of sim, but not an arcade racer. They have started to turn more sim after Forza gave them competition, unfortunately, GT was a Bette game before they tried to become more sim.

Hmm so your sources are gt fan sites

Uhh, one of them was a GT fan site, which was still an impartial review (you do know there's also a Forza fan site run by the same people?), and the other was an automotive magazine. Want some more independent comparisons?

YES PLEASE! :D Thanks! :D

When they announce something like that be sure ill say something. Also if any of the News Reporters or Editors @ NeoWin are interested in a Press access i think that can be achieved also :)

Uhh, one of them was a GT fan site, which was still an impartial review (you do know there's also a Forza fan site run by the same people?), and the other was an automotive magazine. Want some more independent comparisons?

just FYI, FM3. And most will complain the GT5 you can drive on the grass in the corners without losing control as you should and GT5 allows you to throw the car into the corners.

either way, this is off topic.

They have been working simultaneously on the 4 platforms, XBOX 360, PS3, Wii U and PC. There can be some images soon from the console versions, except the WII U which they are still under NDA.

If you need help just say so Lingwo.

Heres a thread that you can give a look @ in order to setup your wheel.

http://forum.wmdport...SETA-tire-model

Pictures of the console version may show up soon.

Thanks, i have been basing my setup off of these and the other controller thread but i think something my end.

FFB and everything is fine, just i can't get the steering lock to work. It didn't when i first booted it up but now, it always wants to do 900 degrees.

I'll try again later today after a reboot, so hopefully it'll be ok now and i can sort the steering lock.

Message from the Developers to everyone who contributed to the project.

Dear Members and Visitors,

Thanks to support from more than 80.000 dedicated members, Project CARS has successfully reached its funding goal of 3.75 Million Euro.

Purchasing and upgrading of tool packs is no longer possible.

All existing members will continue to receive the perks and benefits of their chosen tool packs as the title continues to be developed.

Those of you who missed out on becoming members in time are invited to check wmdportal.com for the latest news on Project CARS. We`re looking forward to everyone giving Project CARS a try once it hits the shelves on 2013 and we hope to welcome you as members of future WMD projects as well.

We wish to thank all our passionate members for making World of Mass Development such an overwhelming success and allowing us to independently fund and develop Project CARS.

The Slightly Mad Studios Team

Now i can't even get the steering lock to be more than 180.

Now all it does is turn 900 degrees and lock it to 180. So when ingame it will do 180. Which is quite annoying because that is half a turn of the wheel. To get 180 though i have to turn 900 on my wheel :laugh:

Also it doesn't center when i let got of the wheel.

I'm not completely thick and have an understanding of what the options mean and can't believe i'm having this much trouble just to get the wheel calibrated :laugh: . I think i may end up having to post to ask for help on the pcars forum.

Just to make sure it wasn't my logitech profiler/wheel playing up, i tried F12011 and it was fine, no troubles.

Probably its when you get to the 90? part during the calibration, it also made me some confusion in the beginning.

So the first phase of wheel calibration is that you turn the wheel left and right to the extreme in order to know the range it has.

The second part is the 90? angle, (heres the tricky part) you have to turn the wheel right and when you see on the top the numbers being = to 900? you hold the wheel like that (dont let it go !!) and press next or finish.

Maybe this is whats causing the issue ?

Yeah, i am sure it is something there but even when i do that. It still has massive issues with it all.

I'll get there in the end, it is a G25 and a popular wheel, so i can't see it being the games fault. Just the idiot with the wheel :laugh:

This topic is now closed to further replies.
  • Posts

    • Russia was able to invade Crimea because of those people. But my point is that I've personally heard how great it was to be "back in Russia" right afterwards - look how great it is now. I've asked you a question in another comment which you haven't answered, so I'll ask it again: is it better now without "Europrats"?
    • ZimaBoard 2 1664 Starter Kit review: it's a cool and affordable DIY NAS by Steven Parker IceWhale Technology reached out to me asking if I was interested in testing the ZimaBoard 2, and after convincing them to send me the Starter Kit, it arrived at my doorstep in May. A bit of background: it is a Shanghai-based Chinese company founded in 2020, which specializes in single-board servers and personal cloud solutions. From searching around online, user feedback on the company and ZimaOS is mostly positive, so we're off to a good start. In addition, I should probably point out that although they do not have a large portfolio of NAS devices, with just four of what they do offer, they seem to have covered everything from a relatively low-priced entry point with the ZimaBoard 2, right up to the high end, with the ZimaCube 2 Creator Pack that even includes an NVIDIA RTX PRO 2000. Anyway, as already mentioned, what we have today is the ZimaBoard 2 Starter Kit, and here are the full specifications: ZimaBoard 2 Model 832, 1664 CPU Intel Core N150 (4x E Cores/Threads, Max burst up to 3.6 GHz) TDP: 6W (Base) 10W (Max) Graphics Intel UHD Graphics 24 EUs (1.00 GHz) Memory 8 GB, 16 GB DDR5 4800MT/s non ECC SODIMM (soldered) Disk Capacity 60 TB (30 TB x 2) Supported RAID Types TRAID, TRAID +, RAID0, RAID1, RAID5, RAID 6, RAID 10 Storage 2 x SATA 3.0 6Gb/s Ports with Power Bootloader 32 GB, 64 GB eMMC Network 2x RJ-45 2.5 GbE PCIe 1 x PCIe 3.0 (via LPC) USB Ports 2 x USB-A 3.1 (5 Gbps) Display Mini-DisplayPort 1.4 (4K@60Hz) Hardware Transcoding Engine H.264, H.265, MPEG-4, VC-1 Maximum resolution: 4K (4096 x 2160); Maximum FPS: 60 Virtualization Intel® AES New Instructions Intel® Virtualization Technology (VT-x) Intel® Virtualization Technology for Directed I/O (VT-d) Size (H/W/D) 140mm x 83mm x 31mm Weight 0.4 kg (only ZimaBoard 2 device) Power 12v 5A Power Supply Warranty 1 year (Global) 2 Years (EU) OS ZimaOS v1.6.1 MSRP $339, $399 ($548.60) As you can see above, there are two variants of the ZimaBoard 2. The lesser variant has half the eMMC storage and 8 GB less RAM, although it also costs $60 less than the top variant we are testing today. The above pricing is only for the ZimaBoard 2. I put the MSRP of the Starter Kit next to it in brackets, although as of publishing, it is discounted to $534.50. The ZimaBoard 2 started life on Kickstarter and shipped to backers in August last year. It became available via the official website in late 2025 and Q1 2026. This hobbyist NAS contains the still relatively new N150 Intel CPU released in the first quarter of 2025, with support for DisplayPort 1.4, HDMI 2.1, although in this case, the memory is integrated into the board itself, so it will not be possible to upgrade or expand the amount. It also supports AV1 decoding, as well as H.264, VP8, VP9, H.265 (8 bit), and H.265 (10 bit). The different capabilities in the Alder Lake-N (and Twin Lake) series are listed below. Processor E-cores L3-cache Turbo clock GPU GPU-clock TDP Intel N355 8 6 MB 3.9 GHz 32 EUs 1.35 GHz 9 W Intel Core 3 N350 3.9 GHz 1.35 GHz 7 W Intel Core i3-N305 3.8 GHz 1.25 GHz 9 W Intel Core i3-N300 3.8 GHz 1.25 GHz Intel N250 4 3.8 GHz 1.25 GHz 6 W Intel Processor N200 3.7 GHz 0.75 GHz Intel N150 3.6 GHz 24 EUs 1 GHz Intel N97 1.2 GHz 12 W Intel Processor N100 3.4 GHz 0.75 GHz 6 W The CPU is part of the Twin Lake series that sits near the bottom of the N-series, designed for low- powered systems and entry-level laptops, and as such has a base level TDP of just 6W. As I have noted before, we are seeing another NAS with a great amount of RAM. It's important to mention that the ZimaBoard 2's memory is integrated into the base board (which is why they have two variants of it). As a reminder, up until a couple of years ago, it was commonplace to only get 2 or 4GB max on a flagship Synology or QNAP home NAS. Ever since the likes of TerraMaster and more have entered the market with ample RAM sizes included in their NAS offerings, it has gone a long way in forcing the hands of the traditional makers to up their game a bit. First impressions The Starter Kit came in one outer box with several packages inside it (shown above). I forgot to take pics of it because when it arrived, it wasn't clear what was inside, and I had to confirm with my contact that I received the entire Starter Kit. In the box ZimaBoard 2 ZimaBoard 2 HDD Expansion Bracket + PCIe card frame Zimaboard Mini DisplayPort Male to HDMI Female Cable 4K 60Hz Zimaboard PCIe 3.0 x4 to Dual NVMe M.2 SSD Adapter Card Quick guide [full online guide] Limited warranty notice Screws Design Where to start? You'd be forgiven for mistaking it as an SSD enclosure if not for all the ports on it. It is completely made out of metal, and the top is an entire heatsink. It has a premium feel about it, but it definitely looks like a hobby device. As you will see, the completed build looks like it belongs in a server or meter closet rather than as a showpiece on someone's desk. On what I am calling the rear, there's a Mini DisplayPort (1.4), two 2.5 GbE ports, with Type A 3.1 USB ports, and then the barrel connector port. Around the front, there are two SATA6 ports with a power connector in the middle. Left side Right side One side is completely free of ports. On the other there's a slit that allows for the feed of a CPU fan cable, and a PCIe 3.0 X4 slot. Top Bottom The top is entirely made up of a heatsink except for the extended height for the I/O on the rear. Around the other side, you can find the ZIMA branding and some regulatory information stamped near the bottom. As you may see from the bottom of the ZimaBoard 2, it scratches quite easily from just moving it around on my Ikea island. Teardown Before we get started, let's have a look at this thing on the inside. The steps to get to the board are as follows: Remove the four smaller Torx screws on the bottom of the ZimaBoard 2; Remove the four larger Torx screws on the sides of the device; Carefully unstick the CMOS battery from the PCB; Remove two Phillips screws on the PCB; Lift out the PCB. Yes, as you can tell from the instructions, you need three different tools to remove Torx and Phillips screws (10 in total), and unhelpfully, one of the screws is located under the CMOS battery, which is stuck onto the PCB. Building Now comes the fun part. Because the ZimaSpace website does not provide any guidance on how to put the Starter Kit together. They only have guidance for connecting the CPU fan. However, they did upload a video to their YouTube channel that shows the entire process. To install the fan, first remove the four screws on the bottom of the ZimaBoard 2, then on the inside, there is a CPU FAN connector where you can attach the fan, reattach the ZimaBoard 2 frame, and feed the fan cable through the provided slit. Then remove the nearest screw on the side and attach the fan frame to the side of the device using the same screw. ZimaBard 2 screws Aligning the screws Bottom view Remember those four screws we removed to access the CPU FAN? Longer screws are provided in the box with the HDD Expansion Bracket, which is what you will now need to attach the ZimaBoard 2 to it. Helpfully, the orientation on how to attach it is made obvious when the frame can only be screwed on at the same overall length as the ZimaBoard 2. If you do it the wrong way around (which is what I did initially) one side hangs off the frame, and it becomes difficult to attach the PCIe Adapter Card cable. PCIe card frame Other side PCIe slot connector Next, it's time to attach the PCIe card frame, which is fastened with the help of 3.5-inch SATA HDD (3 screws). These are toolless screws that you can just use your fingers to fasten them with. Then it is time to connect the provided PCIe cable with the slot connector on one side of the ZimaBoard 2, feed it through the bottom of the HDD frame, and fasten it with two standoffs. Both bracket options 2280 standoffs with 2x 4TB MP44Q The PCIe 3.0 X4 card comes with a short bracket option, handy if you decide to place it inside a different NAS or rack server, but here we need the long bracket. Oddly enough, the M.2 standoffs were preinstalled into the 22110 position, but extra standoffs are included in the box, which I installed at the 2280 position for our use. I added a couple of MP44Q M.2 PCIe 4.0 SSDs (2 x 4TB) that can be availed on Amazon for $478.99 (the lowest price for 3 months) that TEAMGROUP supplied us with Then we have the almost completed build, you just need to push the card into the PCIe slot. Unfortunately, IceWhale Technologies did not provide a screw for the PCIe card frame (this is also apparent in their own video). Here it is at several different angles, with the last pic showing the SATA Y-Cable connected to the two WD Red Plus 4TB drives. Setup and Usage Next, you connect your cables to the I/O, and the ZimaBoard 2 powers on automatically, as there is no power button on the device. Power is controlled through the Settings in ZimaOS. BIOS The ZimaBoard 2 includes an Aptio BIOS from American Megatrends [1, 2, 3], and you can setup pretty much everything here including the boot order, which is locked to the UEFI OS, however above that choice you can enable or disable booting to a SATA/USB bootloader so this would still allow you to switch to an alternative bootloader and boot from it, or disable it to instead always start from the first disk with an OS installed on it. Initial Setup Upon connecting to the LAN and booting up, the ZimaBoard 2 can be reached by navigating to the IP address (shown if you have a monitor connected), or you can find it using the ZIMA Client desktop application, which is essentially a Zima device finder. Initializing the ZimaBoard 2 The ZimaOS setup process is pretty straightforward, through a wizard, and in full above, it basically consists of setting up an account and some handy tips, and that's that! Post Setup (ZimaOS update) Upon first boot, you are alerted that there is a ZimaOS update from 1.5.0 to 1.6.1, which I applied; the full process is shown above with the changelog. ZimaBoard 2 Storage Setup Next, it is time to set up the storage. ZimaOS actually throws everything onto the eMMC flash drive; it is also the default location of AppData, which is definitely something to be wary about, as the 45GB available storage could fill up quickly. HDDs I first attempted to create a Storage Pool using the two 4TB WD Red Plus NAS drives, and got an error message: After several attempts and then looking online, I discovered it was a bug with ZimaOS where the fix was simply to reboot ZimaOS and then try again, this time I was able to create a RAID mirror using the two drives. SSDs I did the same for the SSDs, as you will see in the above gallery, when I created the second Storage Pool, it only allowed me to select available drives. ZimaBoard 2 AppData ZimaOS comes with an App Store that includes a repository of almost 400 apps, so you will be able to find most of what you'll need for a NAS (although after a quick search, I wasn't able to find a Surveillance Manager), and now comes the important part: moving the default AppData location off the 45GB eMMC and onto a larger volume: Open Settings Then Apps Then, in the Select a new location field, click on the new Storage volume you want to move it to (in my case, the Apps Storage Pool), which is the SSD RAID mirror. Confirm the Migration warning Be praised! You can also do this for Docker (which by default installs onto the 45GB eMMC flash drive) and the User database. Plex Setup Next, I tested the configuration by installing the Plex Server app from the App Store. The library folders must already exist (which I placed into the Storage Pool). Plex Server setup is straightforward and requires very little configuration. In my case, all I had to do was add the media path I just created, which you can also browse to using the folder icon in the path field. In addition, you can now map the new Media library in Windows Explorer using the Zima Client. Oddly enough, it is not possible to access the ZimaBoard 2 over the Network Neighborhood; you must map drives using the client, which is shown in the last image in the above gallery. I watched one of my Blu-Ray rips, which is Dolby Vision with Dolby Atmos, and the content played fine with no stuttering or buffering, which is what anyone needs in this scenario. ZimaBoard 2 Zima Client mobile app There's also a client for mobile. It is pretty barebones, as shown in the above gallery, for example, the Apps screen launches the WebUI for that app, and the Backup must be done manually. On opening Backup, you can select internal storage folders on your phone to backup to the ZimaBoard 2's storage, and although this is constantly scanned, the backup action itself must be manually triggered. There is an option to allow foreground backup (last image in the above gallery), but this basically means the queued backup gets triggered when you manually open the app. Benchmarking SATA PCIe 3.0 X4 A CrystalDiskMark test on a mapped network drive from within a Windows 11 25H2 PC (image above) connected over a 2.5 GbE was well within acceptable ranges. Writes were generally better on the SSD RAID mirror. SATA PCIe 3.0 X1 I also ran the NAS Performance tester, which tests the link speed performance. As you can see, it pretty much maxes out the 2.5GbE connection. Of course, you can also opt to bond the two 2.5 GbE connections for a bit more umph, but I didn't do that. Thermals Top PCIe card SATA HDDs Next, I measured some hotspots while playing content on Plex. It's fair to say this will perform better than a NAS that is enclosed in a metal or plastic case, as almost everything storage-wise is exposed! Anyway, the ZimaBoard 2 did not break a sweat with Plex streaming or disk benchmarks. ZimaOS Factory Reset ZimaOS does not include a factory reset option. Instead, you have to download the ZimaOS image and flash it to the eMMC manually. The flashing process is shown in the above gallery. The steps to do so are listed below: Download the ZimaOS image here; Open BalenaEtcher (Run as Administrator) and select the image; Select your inserted USB drive (min 8 GB) Flash to it; Connect your USB drive, monitor, keyboard, USB hub (optional), mouse (optional), and network cable (recommended) to the ZimaBoard 2; Connect power and press F11 continuously; Select your USB drive starting with UEFI in the boot device menu; Press Enter on the Install ZimaOS option; Select /dev/mmcblk0 (MMC) flash drive as target; Confirm with (three times) to wipe the target disk; Wait a couple of minutes while ZimaOS installs; Remove the USB drive and confirm with a reboot; Your ZimaBoard 2 has been factory reset. However, you don't have to stick with ZimaOS, in fact the company also offers official CasaOS images, that are based on Debian; or as they say themselves, put anything you want on this "hackable single board server" it's up to you. Conclusion I had a lot of fun putting this together. I've custom-built all my own PCs and servers since the 90s, and this is the first time I have had to put a NAS together. Even if the actual base ZimaBoard 2 was already a completed build, it still feels pretty custom. I just wish that IceWhale Technology included a getting-started guide in the box for the Start Kit, which would have really completed this kit. Instead, I had to search for the official video on the YouTube channel to make sure I wasn't doing anything wrong. So who is this for? Definitely the hobbyist who is comfortable building their own PC and servers. It also has a much smaller footprint than its nearest equivalent (in terms of specs), like the Beelink Me Pro, which is another NAS I will be testing soon. Although the Beelink does not come with the PCIe 3.0 X4 expansion, the ZimaBoard 2 Starter Kit suddenly looks to be a great bargain, even if it only offers the two 3.5-inch bays over the four in the other example. It makes a lot of sense to use Intel's N150 chip inside a NAS; it is more than capable of doing what the ZimaBoard 2 is intended for, media streaming and backup. It also looks like the IceWhale Technology staff are quite active in the official forums helping people with issues they come across with ZimaOS and the devices, peer support seems to be good as well, I was quickly able to find why I was not able to create a new Storage Pool in ZimaOS v1.6.1 even though that is quite a serious bug, hopefully it will be fixed in the next update. If you are comfortable with the command line and Docker, you'll be fine. You can do great things with this hardware. This was my first time with ZimaOS. It seems a bit barebones in comparison to the likes of Synology DSM, TOS, and UGOS, but it has a ton of apps to get you started with your home or small business NAS. Where to buy As of publishing, IceWhale Technology is running a discount of up to 5% for the Starter Kit. If you opt to get just the ZimaBoard 2 itself, it does come with a SATA Y-Cable, so you will be able to connect up to two 3.5-inch HDDs to it. ZimaBoard 2 1668 Starter Kit for $534.50 on Amazon US (was $548.60) ZimaBoard 2 832 Starter Kit for $372.88 on Amazon US (was $390.60) Zimaboard 2 1668 (16GB+64GB) for $419.90 on Amazon US Zimaboard 2 832 (8GB+32GB) for $359.90 on Amazon Disclosure: IceWhale Technology provided a free sample without any editorial input or review pre-approval. Good to know The Amazon link is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, when you purchase through links on our site, we earn from qualifying purchases.
    • It's in the Insider's group so yes it's technically beta, though these days it's hard to see much of a difference unless you opt for the most extreme beta builds, which I don't. When I moved here from the Release Preview channel I did so primarily because I wanted to see how well the restored taskbar functionality (restored from Win10, and earlier) is working and whether it was time to finally abandon SAB--and it is--working fine, so far. Not as polished as SAB, but it'll do for me.
    • I've been using MWB Premium for a number of years so that along with Windows updates and updated browser should be fine. Thanks for that.
  • Recent Achievements

    • Week One Done
      flexorcist earned a badge
      Week One Done
    • One Month Later
      Woland13 earned a badge
      One Month Later
    • Week One Done
      Woland13 earned a badge
      Week One Done
    • One Year In
      bernmeister earned a badge
      One Year In
    • Week One Done
      Scoobystu earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      488
    2. 2
      +Edouard
      220
    3. 3
      PsYcHoKiLLa
      147
    4. 4
      Steven P.
      74
    5. 5
      FloatingFatMan
      70
  • Tell a friend

    Love Neowin? Tell a friend!