Solve 6-1x0+2/2


Recommended Posts

i guess for the result being 5 can only be:

6-1x(0+2)/2

6-1x(2/2)

6-(1x1)

6-1 = 5

can't see other way for that silly result lol

Actually, I think 5 came from following the steps EXACTLY in order:

6-(1x0)+2/2 (step 1: multiply)

6-0+(2/2) (step 2: divide)

6-(0+1) (step 3: addition)

6-1 (step 4: subtraction)

5

I, for one, care whether people are able to solve a very basic arithmetic problem. It's representative of the overall level of numeracy.

But yes, it should never be written in such a way.

If you write a book about grammar but do not use any space between words, any punctuation, any paragraph and such would you complain that people don't get it ?

Yes knowing the order of operations is important and yes it's surprising that many people don't even know the basis.

But writing readable equations is as much important imo.

If you write a book about grammar but do not use any space between words, any punctuation, any paragraph and such would you complain that people don't get it ?

Yes knowing the order of operations is important and yes it's surprising that many people don't even know the basis.

But writing readable equations is as much important imo.

If it wasn't readable nobody would have got the answer!

Actually, I think 5 came from following the steps EXACTLY in order:

6-(1x0)+2/2 (step 1: multiply)

6-0+(2/2) (step 2: divide)

6-(0+1) (step 3: addition)

6-1 (step 4: subtraction)

5

seriously?

6-1X0+2/2

1X0 = 0

6-0+2/2

2/2 = 1

6-0+1

(6-0) = 6

6+1

(6+1) = 7

how hard is that? Add and subtract does not mean add then subtract, it meants do addition and subtraction in left to right order add or subtract doesn't have a precident, just do them left ot right therefore you get 6 minus 0 first...

the equation rewrites from 6-1x0+2/2 to this (6 - (1 x 0)) + (2 / 2)

additon and subtraction along with multiplication and division are treated at the same precident thats why you MUST do them form left to right...

I am just amazed how so many computer esc people can't grasp at such a simple concept

seriously?

6-1X0+2/2

1X0 = 0

6-0+2/2

2/2 = 1

6-0+1

(6-0) = 6

6+1

(6+1) = 7

how hard is that? Add and subtract does not mean add then subtract, it meants do addition and subtraction in left to right order add or subtract doesn't have a precident, just do them left ot right therefore you get 6 minus 0 first...

the equation rewrites from 6-1x0+2/2 to this (6 - (1 x 0)) + (2 / 2)

additon and subtraction along with multiplication and division are treated at the same precident thats why you MUST do them form left to right...

I am just amazed how so many computer esc people can't grasp at such a simple concept

I think he meant that people who got 5 were following the exact order the operations appear in the BIMDAS acronym rather than the correct order.

seriously?

6-1X0+2/2

1X0 = 0

6-0+2/2

2/2 = 1

6-0+1

(6-0) = 6

6+1

(6+1) = 7

how hard is that? Add and subtract does not mean add then subtract, it meants do addition and subtraction in left to right order add or subtract doesn't have a precident, just do them left ot right therefore you get 6 minus 0 first...

the equation rewrites from 6-1x0+2/2 to this (6 - (1 x 0)) + (2 / 2)

additon and subtraction along with multiplication and division are treated at the same precident thats why you MUST do them form left to right...

I am just amazed how so many computer esc people can't grasp at such a simple concept

Uhm...I was merely explaining how someone COULD have come up with 5. It was questioned as to how someone came up with such an answer. I know the what the correct answer is. Next time, try to keep up.

Uhm...I was merely explaining how someone COULD have come up with 5. It was questioned as to how someone came up with such an answer. I know the what the correct answer is. Next time, try to keep up.

and I was explaining I don't get how people could figure out the logic you explained if you knew the rules where left to right, I wasn't saying you did it wrong, wasn't mocking you or anything, just the people who used that method.. I was explaining the correct way and how could someone even think that's the right way and get five... please don't tell me to keep up, I was just saying The people who got it that way where definatly wrong...sheesh

  • 3 weeks later...

Hi, new user here :blink: :blink:

I found this site after a quick google for the topic equation, and enjoyed the thread.

Thought I'd like to add some comments. Hopefully the thread hasn't been done to death! :o

A quick bit of background, i'm a 53 yr old electrician from the UK, have an IQ of around 140 so no genius but no dummy either :woot: but able to do arithmetic (just about :D )

I can only speak from a UK perspective, but the arrival of so many different answers to this equation boils down to the age gap IMO. You see, most people of my age bracket were simply taught from infant school onwards to simply read the sums from left to right and complete it as you go along, - hence the answer of 3.5.

A tangent to the arrival of 3.5 is that 5 x 0 was taught to equal 5, the logic being applied was that you had 5 to start off with in the first place, therefore 5 times no more would still equal the original 5 that you started with.

Zero times 5 would of course equal zero. So the layout of the sum, and the equation, gives cause for misinterpretation.

Most of these people left school at 14 or 15 so it might be a moment to pause for thought and consider that this age group have been working and paying taxes to subsidise the better education provided today to the younger generation? So calling them thick or stupid just because they are following the education rules that they were taught is a bit rich. (not saying anyone here has indulged in OTT name calling)

The further teaching was to include brackets to give the semblance of order. So the equation would have been written as:

6 - (0 x 1) + (2/2) = ? if one wanted 7 to be arrived at.

Now I've also had to do some brain numbing mathematics as part of electrical theory as the years have gone by, so i'm well aware of the DMAS order of things, the BO part not being seen as important enough to include as it's too obvious really.

I can tell you that a large amount of students religiously follow the order of DMAS as written, so addition often takes place before subtraction, hence the arrival of 5 as an answer.

Then you get the reliance on modern day simple calculators, which give an answer of 1 if you enter the equation as written.

Therefore all modern simple calculators are manufactured wrongly? :whistle: Hmmm... :rolleyes:

There you go, that's my take on it. 7 would be my answer.

Mark.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Microsoft finally admits its default Windows 11 25H2, 24H2 action broke key legacy component by Sayan Sen Microsoft last week released Windows 11 KB5094126 and KB5093998 as the latest Patch Tuesday updates. Following that the company also published the accompanying dynamic updates under KB5094149, KB5095971, and KB5094156. So far the company has acknowledged two known issues that have popped up after the release which include bugged-out Office apps as well as the Recycle Bin; though there could be more at play too. Speaking of bugs and issues, Microsoft seems to have finally acknowledged a problem that probably has been around for close to a year. That's because back in July of 2025 the company made a default change to the latest Windows 11 versions, wherein it switched to JScript9Legacy on Windows 11 24H2 and later releases. Hence following the release of version 25H2 in October 2025, JScript9Legacy also remained default-enabled. As a result there has been a compatibility issue ever since then. For those wondering, by switching to JScript9Legacy Microsoft intended to improve the security of modern Windows PCs by reducing vulnerabilities tied to legacy scripting like cross-site scripting (XSS), among others. XSS exploits can allow cyber-attackers to attach malicious code onto legitimate websites and use them to execute the code when a potential victim loads such a website. Hence the new JScript9Legacy engine enforced stricter execution policies and improved object handling, which should help mitigate such attacks. Microsoft today has published a new support article detailing the problem. Neowin spotted it while browsing. The company says that JScript global definitions and execution context may fail to persist across scripts, potentially breaking older dependent apps and web-based components that relied on this legacy behavior. In the article Microsoft has confirmed that the issue stems from its move away from the older jscript9.dll engine in favor of jscript9legacy.dll. As mentioned above, while the newer engine was designed to address vulnerabilities and strengthen security it also changes how JScript handles execution context. As a result functions and definitions loaded by one script could no longer remain available to subsequent scripts once execution ended. The company notes that some applications worked correctly on earlier Windows versions because the older JScript engine automatically retained global definitions and execution state between scripts. Under the newer model though that behavior is disabled by default causing certain legacy workloads and polyfill-dependent scripts to fail. Microsoft says it addressed the problem via the KB5077241 update though the fix had not been enabled automatically in the following updates. As such admins must explicitly turn on persistent JScript execution context using a Registry setting that the tech giant shared today. The configuration can be applied to individual processes or system-wide through the FEATURE_ENABLE_PERSISTENCE registry key. The steps have been outlined below: Run the following command to create the feature control registry key: reg add "HKLM\Software\Policies\Microsoft\Internet Explorer\Main\FeatureControl\FEATURE_ENABLE_PERSISTENCE" Under this key, create a new DWORD (32-bit) value. Configure the value as follows: To enable persistence for specific processes only: Set the value to 1 for each target process name. To enable persistence for all processes: Add * as the key name and set its value to 1. You can find the official support article here on Microsoft's website.
    • The possibility that milk gathers back into a glass implies that gravity can be 'reversed'.
    • VidCoder 12.20 by Razvan Serea  VidCoder is a DVD/Blu-ray ripping and video transcoding application for Windows. It uses HandBrake as its encoding engine. Calling directly into the HandBrake library gives it a more rich UI than the official HandBrake Windows GUI. VidCoder can rip DVDs but does not defeat the CSS encryption found in most commercial DVDs. You’ll need the NET 8 Desktop Runtime. If you don’t have it, VidCoder will prompt you to download and install it. The Portable version is self-contained and does not require any .NET Runtime to be installed. You do not need to install HandBrake for VidCoder to work. Feature list: Multi-threaded MP4, MKV containers Completely integrated encoding pipeline: everything is in one process and no huge intermediate temporary files H.264, H.265, MPEG-4, MPEG-2, VP8, Theora video Hardware-accelerated encoding with AMD VCE, Nvidia NVENC and Intel QuickSync AAC, MP3, Vorbis, AC3, FLAC audio encoding and AAC/AC3/MP3/DTS/DTS-HD passthrough Target bitrate, size or quality for video 2-pass encoding Decomb, detelecine, deinterlace, rotate, reflect, chroma smooth, colorspace filters Powerful batch encoding with simultaneous encodes Customizable Pickers to automatically pick audio and subtitle tracks, destination, titles and more Instant source previews Creates small encoded preview clips Pause, resume encoding VidCoder 12.20 changes: Updated HandBrake core to 1.11.2. Download: VidCoder 12.20 | 47.0 MB (Open Source) Download: Portable VidCoder 12.19 | 89.3 MB Link: VidCoder Home Page | Github | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Too soon, I'm still not over this death!
  • Recent Achievements

    • Week One Done
      Jordan Smith earned a badge
      Week One Done
    • Reacting Well
      BizSAR earned a badge
      Reacting Well
    • First Post
      AndreaB earned a badge
      First Post
    • Week One Done
      Huge Trailer earned a badge
      Week One Done
    • Week One Done
      Classifyskilleducation earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      593
    2. 2
      +Edouard
      185
    3. 3
      PsYcHoKiLLa
      77
    4. 4
      Michael Scrip
      73
    5. 5
      Steven P.
      66
  • Tell a friend

    Love Neowin? Tell a friend!