Solve 6-1x0+2/2


Recommended Posts

i guess for the result being 5 can only be:

6-1x(0+2)/2

6-1x(2/2)

6-(1x1)

6-1 = 5

can't see other way for that silly result lol

Actually, I think 5 came from following the steps EXACTLY in order:

6-(1x0)+2/2 (step 1: multiply)

6-0+(2/2) (step 2: divide)

6-(0+1) (step 3: addition)

6-1 (step 4: subtraction)

5

I, for one, care whether people are able to solve a very basic arithmetic problem. It's representative of the overall level of numeracy.

But yes, it should never be written in such a way.

If you write a book about grammar but do not use any space between words, any punctuation, any paragraph and such would you complain that people don't get it ?

Yes knowing the order of operations is important and yes it's surprising that many people don't even know the basis.

But writing readable equations is as much important imo.

If you write a book about grammar but do not use any space between words, any punctuation, any paragraph and such would you complain that people don't get it ?

Yes knowing the order of operations is important and yes it's surprising that many people don't even know the basis.

But writing readable equations is as much important imo.

If it wasn't readable nobody would have got the answer!

Actually, I think 5 came from following the steps EXACTLY in order:

6-(1x0)+2/2 (step 1: multiply)

6-0+(2/2) (step 2: divide)

6-(0+1) (step 3: addition)

6-1 (step 4: subtraction)

5

seriously?

6-1X0+2/2

1X0 = 0

6-0+2/2

2/2 = 1

6-0+1

(6-0) = 6

6+1

(6+1) = 7

how hard is that? Add and subtract does not mean add then subtract, it meants do addition and subtraction in left to right order add or subtract doesn't have a precident, just do them left ot right therefore you get 6 minus 0 first...

the equation rewrites from 6-1x0+2/2 to this (6 - (1 x 0)) + (2 / 2)

additon and subtraction along with multiplication and division are treated at the same precident thats why you MUST do them form left to right...

I am just amazed how so many computer esc people can't grasp at such a simple concept

seriously?

6-1X0+2/2

1X0 = 0

6-0+2/2

2/2 = 1

6-0+1

(6-0) = 6

6+1

(6+1) = 7

how hard is that? Add and subtract does not mean add then subtract, it meants do addition and subtraction in left to right order add or subtract doesn't have a precident, just do them left ot right therefore you get 6 minus 0 first...

the equation rewrites from 6-1x0+2/2 to this (6 - (1 x 0)) + (2 / 2)

additon and subtraction along with multiplication and division are treated at the same precident thats why you MUST do them form left to right...

I am just amazed how so many computer esc people can't grasp at such a simple concept

I think he meant that people who got 5 were following the exact order the operations appear in the BIMDAS acronym rather than the correct order.

seriously?

6-1X0+2/2

1X0 = 0

6-0+2/2

2/2 = 1

6-0+1

(6-0) = 6

6+1

(6+1) = 7

how hard is that? Add and subtract does not mean add then subtract, it meants do addition and subtraction in left to right order add or subtract doesn't have a precident, just do them left ot right therefore you get 6 minus 0 first...

the equation rewrites from 6-1x0+2/2 to this (6 - (1 x 0)) + (2 / 2)

additon and subtraction along with multiplication and division are treated at the same precident thats why you MUST do them form left to right...

I am just amazed how so many computer esc people can't grasp at such a simple concept

Uhm...I was merely explaining how someone COULD have come up with 5. It was questioned as to how someone came up with such an answer. I know the what the correct answer is. Next time, try to keep up.

Uhm...I was merely explaining how someone COULD have come up with 5. It was questioned as to how someone came up with such an answer. I know the what the correct answer is. Next time, try to keep up.

and I was explaining I don't get how people could figure out the logic you explained if you knew the rules where left to right, I wasn't saying you did it wrong, wasn't mocking you or anything, just the people who used that method.. I was explaining the correct way and how could someone even think that's the right way and get five... please don't tell me to keep up, I was just saying The people who got it that way where definatly wrong...sheesh

  • 3 weeks later...

Hi, new user here :blink: :blink:

I found this site after a quick google for the topic equation, and enjoyed the thread.

Thought I'd like to add some comments. Hopefully the thread hasn't been done to death! :o

A quick bit of background, i'm a 53 yr old electrician from the UK, have an IQ of around 140 so no genius but no dummy either :woot: but able to do arithmetic (just about :D )

I can only speak from a UK perspective, but the arrival of so many different answers to this equation boils down to the age gap IMO. You see, most people of my age bracket were simply taught from infant school onwards to simply read the sums from left to right and complete it as you go along, - hence the answer of 3.5.

A tangent to the arrival of 3.5 is that 5 x 0 was taught to equal 5, the logic being applied was that you had 5 to start off with in the first place, therefore 5 times no more would still equal the original 5 that you started with.

Zero times 5 would of course equal zero. So the layout of the sum, and the equation, gives cause for misinterpretation.

Most of these people left school at 14 or 15 so it might be a moment to pause for thought and consider that this age group have been working and paying taxes to subsidise the better education provided today to the younger generation? So calling them thick or stupid just because they are following the education rules that they were taught is a bit rich. (not saying anyone here has indulged in OTT name calling)

The further teaching was to include brackets to give the semblance of order. So the equation would have been written as:

6 - (0 x 1) + (2/2) = ? if one wanted 7 to be arrived at.

Now I've also had to do some brain numbing mathematics as part of electrical theory as the years have gone by, so i'm well aware of the DMAS order of things, the BO part not being seen as important enough to include as it's too obvious really.

I can tell you that a large amount of students religiously follow the order of DMAS as written, so addition often takes place before subtraction, hence the arrival of 5 as an answer.

Then you get the reliance on modern day simple calculators, which give an answer of 1 if you enter the equation as written.

Therefore all modern simple calculators are manufactured wrongly? :whistle: Hmmm... :rolleyes:

There you go, that's my take on it. 7 would be my answer.

Mark.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • OK, back to normal now! Ozzy Osbourne - Flying High Again (Official Music Video)  
    • The actual download size is ~130–180 MB, not 100 MB.
    • Big change of pace for me! Gunnar & the Grizzly Boys - Standard American (Official)  
    • draw.io Desktop 30.2.4 by Razvan Serea draw.io desktop is a downloadable security-first diagramming application that runs on Windows, MacOS and Linux. Creating diagrams in the desktop app doesn’t need an internet connection. This is useful when you are disconnected or when you must create diagrams in a highly secure environment, where data protection is of the utmost importance. When you use the draw.io desktop app, your diagrams will be stored on your local device. Because this is a stand-alone application, also designed to run offline, there are no interfaces to cloud storage platforms available. Of course, you can still store your diagrams in folders that are synchronised to your cloud storage if you wish. Easy-to-use diagram editor The draw.io apps work just like the office and drawing tools you are used to using. Drag and drop shapes from the shape libraries and drag to draw connectors between them. Drag connectors to add waypoints and set a precise shape and position, or let them reroute automatically. Double click and start typing to add a label to anything. Create tables and swimlane flows with a familiar tool. Style shapes and connectors with customisable palettes, sketch options, fonts and text formatting tools. Search for shapes, including in open-source icon libraries. Use our vast libraries of shapes and templates, organised into logical categories, to create a range of diagrams and infographics. Generate diagrams from text descriptions using our smart templates. Diagram faster with keyboard shortcuts. draw.io Desktop 30.2.4 changelog: Uses electron 42.4.1 Updates to draw.io core 30.2.4. Download: draw.io 64-bit | Standalone ~100.0 MB (Open Source) Download: draw.io 32-bit | ARM64 | ARM64 Standalone Links: draw.io Home Page | Project page @GitHub | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Microsoft will soon allow some users to block Copilot from analyzing their Office files by Usama Jawad Microsoft Purview is a pretty useful data governance, security, and management service that allows customers to gain enhanced visibility and control over their content. It's meant for commercial customers, such as organizations that are storing data at scale. As AI continues to expand and infiltrate every corner of a firm, many are a bit conscious about the technology gaining access to their confidential data. Microsoft is now making a configuration change that will allow such customers to rest easy. Right now, users within an organization have the option to apply Purview sensitivity labels (when available) to secure certain files and label them as such. For example, if you apply the "Confidential" label on an Excel file, the file will be encrypted, and a "confidential" watermark will be applied to it. So, if this file is shared with anyone, they are aware that its access is supposed to be restricted. Up until now, Microsoft was allowing some connected experiences, like its AI services, to analyze files, regardless of their sensitivity label. This is of major concern to most organizations, as a recent example highlighted how confidential emails with data loss prevention (DLP) policies like privacy labels were being uploaded to Copilot for analysis. As such, Microsoft is updating an existing Purview data label sensitivity setting that prevents "some connected experiences that analyze content", from being blocked completely from doing this. The label isn't changing, but the blocking is now being enforced across all connected services (including Copilot and other AI tools), and now extends to Microsoft Word, Excel, and PowerPoint. Files with the label applied already will get this enhancement automatically too once it becomes available. Microsoft has urged IT admins to inform their respective helpdesk and compliance teams, update internal documentation, and review sensitivity labels to ensure that they meet their respective compliance needs. This change is tagged as MC1297982 in the Message Center. General availability is scheduled to begin in a phased manner soon and will complete by the end of next month. That said, it is important to note that this only applies to commercial customers who have a license that allows them to use Purview.
  • Recent Achievements

    • Week One Done
      Eurosoft10 earned a badge
      Week One Done
    • One Month Later
      Eurosoft10 earned a badge
      One Month Later
    • One Year In
      Skeet Campbell earned a badge
      One Year In
    • One Month Later
      Sharbel earned a badge
      One Month Later
    • First Post
      BizSAR earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      590
    2. 2
      +Edouard
      191
    3. 3
      PsYcHoKiLLa
      78
    4. 4
      Michael Scrip
      76
    5. 5
      neufuse
      73
  • Tell a friend

    Love Neowin? Tell a friend!