Potential Computer Build - and I'm talking everything!

By CG-88
in Hardware Hangout

 Share

Recommended Posts

Experienced

CG-88

Posted
Posted

Right....It has been many years since I built a computer or had an actual desktop so this build is going to be EVERYTHING lol

I'm a bit behind so if anyone has any advice based on the parts listed below please advise part swaps for something else etc.

The computer will mainly be used for programming and gaming.

Here goes:

CPU: Intel core i5 3.1ghz

Mobo: MSI Z77A - G43

RAM: Adata XPG Gaming

GFX: KFA2 Gefore GTX 660TI

SSD: OCZ Agility 3 60gb

SSD Adapter: Akasa Adapter

HDD: Seagate Barracude 1tb

PSU: OCZ ZS Series 750W

Optical Drive: Sony piece of **** for installing OS lol

Case: Xigmatek Asgard II

Total - ?742.89

In addition to this I have 2 24" monitors added to the basket, audio cable, various required cables and a keyboard and mouse.

Overall total - ?1,016.51

So based on the list, are there any better alternatives that might save a bit of money? Or maybe componants that will suit my needs more than what is on the list?

I am not a graphics ###### but I do like skyrim on max etc. I am not a major downloader of music but I suppose I would be if I had the space, movies etc.

And also, for the PSU - comes with 6 pin pci and 6+2 pin pci. Will this work considering the gfx card states 6 pin and 8 pin?

And can you install windows 8 on a fresh install? Or would I have to install windows 7 and do it that way?

Thanks :D :D :D

Experienced

CG-88

Posted
  • Author
Posted

Right looked over my list and here is an alternative

CPU: Core I5 3.0ghz

Mobo: MSI z77a - g43

RAM: Patriot 2x4gb

GFX: Gainward 560ti

SSD: OCZ agility sata 6gb/s

SSD Adapter: Akasa

HDD: Toshiba 1tb

PSU: OCUK Rage GT 700w

Case: Xigmatek Asgard II

Total for all that is : ?624.90

Then with the addition of 1 monitor(for the time being) and keyboard/mouse etc

?799.91

Same questions as first post apply. I think I have put all the componants together correctly so they will all work but I want someone to double check for me.

EDIT: Updated SSD to 6gb/s sata as mentioned below and removed optical drive. thanks guys

Experienced

CG-88

Posted
  • Author
Posted

Why use a disc for installing OS at all? Install via USB. Faster, need less stuff, and fully updated installer.

Ah cool thanks, didnt even think about that :)

Your board has Sata III but you have chosen a Sata2 SSD

not sure if it makes a massive difference but it stood out

Woops, yeah not sure of the difference, will have a look thanks!!

I'm going to begrudge buying windows 7 again though to upgrade to 8 when it is available :s lol

EDIT: updated second list based on comments so far, removing optical drive and adding a better SSD only took the total up ?1 lol

Grand Master

tsupersonic

Posted
Posted

Your board has Sata III but you have chosen a Sata2 SSD

not sure if it makes a massive difference but it stood out

Well...the Agility 3 is SATA 3 (which was in the 1st post). The Vertex 2 is outdated, and 2 generations behind, and also SATA2 (2nd post). Personally I would recommend against OCZ, but many people have had good luck with them on the forum. I can recommend Crucial M4, Samsung 830 and Corsair Force GT SSD as an alternative - those are very reliable, offer great speeds, but can be slightly more expensive than the OCZ alternatives.
Experienced

CG-88

Posted
  • Author
Posted

Well...the Agility 3 is SATA 3 (which was in the 1st post). The Vertex 2 is outdated, and 2 generations behind, and also SATA2 (2nd post). Personally I would recommend against OCZ, but many people have had good luck with them on the forum. I can recommend Crucial M4, Samsung 830 and Corsair Force GT SSD as an alternative - those are very reliable, offer great speeds, but can be slightly more expensive than the OCZ alternatives.

Thanks, I updated back to the OCZ in the first post, but I'm open to options, is something is alot better/reliable with a bit of an extra cost I can look into it definitely.

I'm just trying to get my head around building again and wanted to make sure what I put down is worthwhile for the purpose of what i will be using it for,

thanks

EDIT: found this for not much extra - http://www.overclockers.co.uk/showproduct.php?prodid=HD-023-CS&groupid=701&catid=2104&subcat=

This topic is now closed to further replies.
 Share
Go to topic listing

  • Posts

    • what other retro software do yall use

      By goretsky · Posted

      Hello, Christian Maas' XVI32 is a nice (and very small) hex editor. Speaking of hex editors, many years ago a colleague and I who both worked at Tribal Voice managed to edit a copy of the company's PowWow instant messaging client to make it behave better now that all of its lookup servers and other server-side tech was gone.  The program didn't support NAT (RFC-3022 was introduced in January 2001, the same time Tribal Voice was shuttered), but it still worked okay if you manually set up port-forwarding on your router.  The server at http://powwow.jazy.net/ hosts a copy (usual warnings about downloading and running untrusted code from random internet servers apply). I occasionally use some tools like Funduc Software's Search and Replace and Application Mover when I need to make mass-edits to text-based files or move programs with a hard-coded installation directories, respectively.  When I need to figure out the exact LCD panel inside of a laptop, EnTech Taiwan's Monitor Asset Manager is my go-to tool for that purpose. JD Design's website (now hosted on github.io) has a number of interesting freeware and shareware utilities.  I used to use their TouchPro utility to set the file timestamps on software I was mastering to match its version number (e.g., version 3.00 of a program had all of its files dates set to 3:00AM, and so forth). Karenware has a number of interesting freeware utilities, too. Regards, Aryeh Goretsky  
    • what other retro software do yall use

      By Steven P. · Posted

      I still use HexChat! Not really as ancient as the 1994 AutoCAD above my post, but I have never found anything better to replace it. Yes we still operate an IRC server https://www.neowin.net/irc/ 😛 
    • what other retro software do yall use

      By +InsaneNutter · Posted

      At work we still have a couple of people that use a version of AutoCAD LT purchased in 1994. This predates Windows 95 and works fine on versions of Windows up to XP. Its long since run in an locked down isolated XP VM, accessible via RDP. I did install LibreCAD for them, however they said it was just too different to get to grips with. In all fairness one of them is now 75 and the other is almost 60.
    • what other retro software do yall use

      By He's Dead Jim · Posted

      On my music making (non internet) PC Sony Acid Pro 7.0 Adobe Audition 2015 Korg Legacy Collection Windows 7 SP1
    • Microsoft releases major feature updates for stock Windows 11 apps

      By PurSpyk · Posted

      Anyway to download these versions without being on the Experimental builds?

  • Recent Achievements

    • Week One Done
      Jeroen Wilms earned a badge
      Week One Done
    • Week One Done
      rolfus earned a badge
      Week One Done
    • One Month Later
      Leroy Jethro Gibbs earned a badge
      One Month Later
    • Conversation Starter
      flexorcist earned a badge
      Conversation Starter
    • One Month Later
      AndreaB earned a badge
      One Month Later

  • Popular Contributors

    1. 1
      +primortal
      509
    2. 2
      +Edouard
      198
    3. 3
      PsYcHoKiLLa
      138
    4. 4
      ATLien_0
      90
    5. 5
      Steven P.
      82
    Show More

  • Tell a friend

    Love Neowin? Tell a friend!