Motherboard making dial-up sounds whenever there's activity


Recommended Posts

Originally, I thought the issue was my mechanical hard drive making annoying "loading" sounds whenever the PC loaded anything or whenever I moved the mouse over certain areas of the screen, but I've since replaced that HDD with an SSD, and I'm still hearing the same issue. If I move the mouse or load something, then put my ear up to the case, the sound seems to be coming from the right side of the motherboard. It's an annoying squeal / buzz, similar to a dial up modem but not as harsh. Unfortunately, the noise also travels into my new Studio Monitors, even through an external firewire sound card. I am at a loss. I have no idea what is making the noise and I have no idea how to stop it.

Bad grounding on your power supply / bad or no ground on your wall outlet? I've seen issues like that occur when this was the issue... or a lot of noise on your electical line (thats why they have isolated grounds for equipment)

try taking it to someone elses house and see if you get the same noise, if so, it is probably an electical issue in the house causing it

If you hear it handshake like a modem and then ask "Would you like to play a game", i would be worried :)

Ive had a machine do that, and it was, for me, line noise and its effect on the power supply and on to the motherboard, in the end i put in a surge/noise filtering powerboard

It sounds like a ground loop. Had a friend with the same problem, every time he moved the mouse it was making a "zipping" noise.

He ended up putting passive DI boxes in line with the speakers and using the ground lift to eliminate the noise.

Bad grounding on your power supply / bad or no ground on your wall outlet? I've seen issues like that occur when this was the issue... or a lot of noise on your electical line (thats why they have isolated grounds for equipment)

try taking it to someone elses house and see if you get the same noise, if so, it is probably an electical issue in the house causing it

I leave for work in a few minutes. I'll try taking it over there.

So 3 questions.

Onboard Sound?

What PSU & Motherboard do you have?

Have you tried to see if it's coming from the same spot on the motherboard as the BIOS beeps? Usually the buzz is coming from that speaker.

Mobo and PSU should be in sig specs. EX58 UD3R and...I can't remember the name of the PSU. Doesn't happen with onboard sound. Well, I can still hear it inside of the PC Case / Mobo, but it doesn't travel through my old speakers. It's only really noticeable with the new speakers via external firewire soundcard. (But I've had the sound card for years and it works fine on my laptop). If it's coming from the mobo speaker, can I just disable the speaker somehow?

Dial up sounds ah memories. Maybe your motherboard is just feeling nostalgic :)

Sorry couldnt help, ill depart so that others can continue to offer help.

Haha. The good old days...

If you hear it handshake like a modem and then ask "Would you like to play a game", i would be worried :)

Ive had a machine do that, and it was, for me, line noise and its effect on the power supply and on to the motherboard, in the end i put in a surge/noise filtering powerboard

Man, just looked into noise filtering power strips aren't exactly cheap! But I Actually have one already and it doesn't help. Should I plug the PC into it or the Speakers? With the PC plugged in, it made no difference.

It sounds like a ground loop. Had a friend with the same problem, every time he moved the mouse it was making a "zipping" noise.

He ended up putting passive DI boxes in line with the speakers and using the ground lift to eliminate the noise.

Yeah... That might be an option, but I'd like to eliminate the problem at the source so I don't have to worry about it traveling through the speakers to begin with.

One of my friends had this sorta issue with his computer. He had slightly damaged a capaciter whilst putting a gfx card in and it resulted in this noise. He tried to repair the slightly broken connection and all was well.

Zero explanation why that would cause this problem but it was resolved that way.

maybe it's a bad built in speaker and it just sounds like dial up? there's nothing on your board that would sound like that, i mean 10/100/1000 LAN controllers do not make sounds. disconnet the front panel speaker if you have one and see what happens.

I don't have a front speaker, but there are a lot of issues reported with static on the Antec 900 front out jack. Except I'm not even using that jack...I'm using an external firewire card.

If you go here and scroll down to the second post, then click "Noise while installing a program", that's what I'm hearing. But mine is a bit stronger than that. http://www.gearslutz.com/board/studio-building-acoustics/450785-ground-loop-i-think-problem.html

If possible, try swapping out the power supply. Based on the amount of electrical interference in your computer case, you're probably going to have to switch out everything one at a time if you want to narrow it down, although it's most often your PSU or motherboard.

If possible, try swapping out the power supply. Based on the amount of electrical interference in your computer case, you're probably going to have to switch out everything one at a time if you want to narrow it down, although it's most often your PSU or motherboard.

The only extra PSU I have is too weak, so that probably isn't an option. Man this is awful. I wonder if buying better speaker cables would help. It's weird; when I use my old mouse, there's no "cursor moving" noise, but I still hear the PC's activity.

New progress -

Adjusting the polling rate from 1,000 to 125 Khz got rid of the mouse noise. On the negative side, there's a bit more mouse latency but it's worth the noise going away.

Now all that's left is the noise coming from any sort of activity, such as a program loading or closing a window. I'm going to buy new 1/4 TRS Cables, but it'd still be nice if I could eliminate the issue from the source (the pc) somehow.

Last bump because I'm desperate. Got my new 20gauge braided shield TRS cables today. They GREATLY reduced the noise, but it's still there. I guess I'm screwed at this point because the speakers work fine with everything but my desktop. Everything is grounded into the same outlet. I even tried plugging the desktop into my hallway outlet to try and space everything out, but I still get interference. I wish I knew how to eliminate the noise at the source.

There is NO interference in the BIOS, but it starts immediately when windows begins to load.

I'm not even using the onboard sound. I'm using my firewire external sound card. And onboard is disabled via BIOS just to be safe.

And the firewire audio interface isn't faulty, because it works on other computers and my laptop. The noise is originated form somewhere inside of my PC case and is making its way into my speakers....

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • >Improved system sounds when using Windows in dark mode. The story being that bug would be an interesting one.
    • Edifier S3000MKII hi-fi audiophile grade bookshelf speaker is at its lowest price now by Sayan Sen Yesterday we covered a bunch of Dolby Atmos soundbar deals with several ones from Sony, as well as from JBL, Samsung, Polk Audio, and more. You can check them out in this dedicated piece. Those are not audiophile category speakers though as they are built with home theater use in mind. If you are searching for the former then Edifier has its S3000MKII at its lowest price at the moment (purchase link under the specs table down below). This is a two-way bookshelf monitor speaker designed to produce accurate sound. While it may not produce the best high-fidelity audio possible out there, it should still be significantly better than what you will get on soundbars of this price range. As such it will do justice to high-res audio played back through it. The only thing that may feel lacking is sub-bass as Edifier claims the unit can go down to 38 Hz, which should be enough for studio monitor purposes, but not for deep room-shaking rumbling bass. Where this does excel though is in its treble reproduction. With its super-tweeter, it claims to go as high as 40 kHz in the frequency spectrum, which should offer a sense of "air"yness. This is an active speaker which means it packs its own amplfication. It has a top-notch Class D amp that may be able to rival many Class AB designs too in terms of sound reproduction quality. The technical specs of the Edifier S3000MKII are given in the table below: Specification Value RMS Output Power 256W RMS (Treble: 8W × 2, Mid-Low: 120W × 2) Tweeter Driver 107mm × 107mm Planar Magnetic Tweeter Mid-Low Driver 6.5-inch (179mm) Long-Throw Aluminum Diaphragm Driver Frequency Response 38Hz – 40kHz Signal-to-Noise Ratio ≥ 85dB (A) Bluetooth Version Bluetooth 5.0 Bluetooth Codec Qualcomm® aptX™ HD Wireless Speaker Link Proprietary 5.8GHz wireless connection between speakers Supported Hi-Res Audio Hi-Res Audio Certified, up to 24-bit/192kHz Digital Processing XMOS XU216 Digital Signal Processor Audio Inputs Balanced XLR, Optical, Coaxial, USB Type-B, Line In, Bluetooth Input Sensitivity (USB) 400 ± 50mFFs Input Sensitivity (Optical) 400 ± 50mFFs Input Sensitivity (Coaxial) 400 ± 50mFFs Input Sensitivity (Bluetooth) 450 ± 50mFFs Input Sensitivity (Balanced XLR) 1000 ± 50mV Input Sensitivity (Line In) 600 ± 50mV ADC Capability Up to 24-bit/192kHz DSP Capability Up to 24-bit/192kHz DIX Capability Up to 24-bit/216kHz DAC Capability Up to 32-bit/384kHz XMOS Processing Power Up to 2,000 MIPS Edifier S3000MKII Audiophile Active (Powered) Wireless Speakers: $799.99 (Sold by Edifier US, Shipped by Amazon US) If you do not have the kind of budget to spend on the S3000MKII, you can also check out the Edifier R1280Ts which is right now on sale at just $114 (its lowest price in a very long time). Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • > The G 7 Pro supports wireless (XBOX Wireless, proprietary dongle, or Bluetooth) If anybody else's brain translates this to 'it works wirelessly on Xbox', according to the linked product page, it does not.
    • Ignoring the fact that this "colony" kicked the empire of King George's arse during those early years... You are confusing the First Industrial Revolution (which was clearly pulled out of some butt-hurt Brit historian's arse after the fact) with the Second Industrial Revolution (aka now called the Technological Revolution, undoubtedly by that same butt-hurt Brit), which transitioned the world from the UK/UPS Empire to the USA as the world's only superpower. https://en.wikipedia.org/wiki/Industrial_Revolution I hope you realize that I am having big fun here.
    • OpenAI announces GPT‑5.6 Sol, its next-generation flagship model beating Claude Mythos 5 by Pradeep Viswanathan Credit: OpenAI OpenAI today announced a limited preview of its new GPT-5.6 model series, which includes the Sol, Terra, and Luna models targeting different price points. GPT-5.6 Sol is the flagship model targeted at demanding reasoning and agentic workloads. GPT-5.6 Terra is positioned as a balanced model for everyday work, featuring performance competitive with GPT-5.5 while being half the cost. GPT-5.6 Luna is the fastest and most affordable model, delivering strong capability at a lower price point. Unlike previous model releases from OpenAI, GPT-5.6 is starting with a limited preview for a small group of trusted partners due to U.S. government restrictions. As expected, OpenAI previewed its plans and the models' capabilities to the U.S. government ahead of launch, and the government asked OpenAI to limit the first wave of access to select partners. OpenAI also mentioned in the official announcement blog post that it does not believe this type of government access process should become the long-term default. OpenAI highlighted that GPT-5.6 Sol comes with a robust safety stack featuring improved protections for higher-risk activity, sensitive cyber requests, and repeated misuse. The company also spent several weeks pressure-testing the system and hardening it against real-world attacks. On the capability side, as expected, GPT-5.6 Sol is OpenAI’s strongest model yet. It delivers better results in agentic performance across coding, biology, and cybersecurity. On the Terminal-Bench 2.1 benchmark, which tests command-line workflows requiring planning, iteration, and tool coordination, GPT-5.6 Sol sets a new record with a score of 91.9%, beating Anthropic's Claude Mythos 5. Additionally, GPT-5.6 introduces a new "max" reasoning effort for even deeper reasoning. The new "ultra" mode uses subagents to accelerate complex work beyond what a single agent can handle. Pricing starts at $5 per million input tokens and $30 per million output tokens for Sol. Terra costs $2.50 for input and $15 for output, while Luna costs $1 for input and $6 for output. GPT-5.6 comes with more predictable prompt caching, including support for explicit cache breakpoints and a 30-minute minimum cache life. Sol will also launch on Cerebras in July at speeds up to 750 tokens per second for select customers. OpenAI plans to make GPT-5.6 Sol, Terra, and Luna broadly available in ChatGPT, Codex, and the API in the coming weeks.
  • Recent Achievements

    • One Year In
      bernmeister earned a badge
      One Year In
    • Week One Done
      Scoobystu earned a badge
      Week One Done
    • Week One Done
      tuben earned a badge
      Week One Done
    • First Post
      OffsetAbs earned a badge
      First Post
    • Reacting Well
      OffsetAbs earned a badge
      Reacting Well
  • Popular Contributors

    1. 1
      +primortal
      441
    2. 2
      +Edouard
      197
    3. 3
      PsYcHoKiLLa
      155
    4. 4
      FloatingFatMan
      71
    5. 5
      Steven P.
      67
  • Tell a friend

    Love Neowin? Tell a friend!