Partitioning Windows at the end?


Recommended Posts

Maybe I am misunderstanding your problem, but even if you download the ISOs, how would you use them. You have to boot from the burned ISO image, but you have no CD burner. It sounds to me like you'll have to buy the CDs. I recommend http://www.edmunds-enterprises.com/linux/index.php. I bought Gentoo 1.4 i686 from them as it the cheapest store around.

Heres what I want.

I have a 20GB Hdd.

Windows goes right to the end, from 15-20GB.

Then, I install Linux on the unpartitioned space, from 1-14.99GB of the HDD. All my RH9 ISOs reside on my Windows partition, so that i can install from there.

Then after installation, I use parted etc to delete my Windows partition, and use the rest for Linux.

My question: How do I get Windows to install right at the end?

uhm.......ok but how do you intend on using the isos to install them? If my memory serves me right last time I tried to read a linux cd (iso) in windows it didn't work out too well lol......so without a cd burner how do you intend to install linux?

are you asking to install windows at the end of your hard drive so that you can just remove it after you're done installing redhat? if so, you don't necessarily have to put it at the end. you can use a program like partitionmanager to delete the windows partition and then resize the linux one to utilize the unused space.

a) i dont think partiton magic can resize linuxtype filestructures

b) windows has to 'have' the first partition on the disk because it needs to keep boot info there.

So the best thing would be to just have two partitions, and use one for you home directory, that way when and if you ever switch distros or reinstall you dont loose all your data. Make shure to copy all the home info onto the partition before you mount it because most distros keep all kindsa configs etc in there.

Or head over to newegg.com every night at about 8pm and check there referbished items for a cheap cd burner, ive seen em low as 20$ refurb.

  seethru said:
uhm.......ok but how do you intend on using the isos to install them? If my memory serves me right last time I tried to read a linux cd (iso) in windows it didn't work out too well lol......so without a cd burner how do you intend to install linux?

RH9 installer supports HDD install, you just need to tell them where the ISOs are located.

HPMCommander, it seems that Linux will only utilise space in front of it, eg Linux is on 15-18GB, and Windows on 0-15GB. When you free up WIndows partition and give linux 18-20GB, Linux will only utilise 15-20GB, it will NOT utilise space 'behind'.

I don't want to speak for you, trenzterra, but if he doesn't have a CD burner, what makes you all think he paid for PartitionMagic? GNU Parted only allows resizing of a Linux-type partition if its start position remains fixed, so trenzterra is correct in wanting to install Linux at the beginning of the hard drive. However, I've never heard of an HDD install. I have heard of a network install, though. I am interested in it. Can you tell me more please?

  Mr. Static Void said:
I don't want to speak for you, trenzterra, but if he doesn't have a CD burner, what makes you all think he paid for PartitionMagic? GNU Parted only allows resizing of a Linux-type partition if its start position remains fixed, so trenzterra is correct in wanting to install Linux at the beginning of the hard drive. However, I've never heard of an HDD install. I have heard of a network install, though. I am interested in it. Can you tell me more please?

HDD Install works the same way as CD install, you download the ISOs and RH will read it from there...

I need help with network install too, can't figure out using PPPoE. If you can help me check my other thread.

I don't have Partition Magic too.

Or is this possible, I create a Linux partition, then create a Windows partition. Then I delete the Linux partition. This way, will Windows install at the end?

  lostspyder said:
b) windows has to 'have' the first partition on the disk because it needs to keep boot info there.

windows (at least NT) needs to have the boot files (NTLDR, boot.ini, ntdetect.com) on the first partition. windows can be installed on any partition you want. what i'm saying is, you can have a small partition (few MB) at the beginning of your drive, then linux partitions, then windows.

  gameguy said:
windows (at least NT) needs to have the boot files (NTLDR, boot.ini, ntdetect.com) on the first partition. windows can be installed on any partition you want. what i'm saying is, you can have a small partition (few MB) at the beginning of your drive, then linux partitions, then windows.

How do you move the boot files there?

Hi, I was wondering whether this would work:

First, I found a utility that's very flexible in partitioning.

I put my ISOs on a seperate partition at the second last part of the HDD. Then I put Windows XP at the last part of the HDD. Eg:

Linux - 1-5GB

ISOs - 6-7.5GB

Windows XP-7.5GB-18.6GB

Is that possible? Then I would use LiLo to set up multiboot...

everyone seems to have made it so copmlicated.

make a backup of whatever u DONT wanna loose.

install windows again.. - when it askes for partition and stuff

make 1 partition which is 15g, then make another which is 5 gig.. then go back and delete the 15 gig.. this will make ur partition for u, in ur desired location..

install or reinstall windows onto ur new partition..

then go back - and install linux.. as long u create the windows on a vfat (fat32) fs then u'll be be able to useitilse that space with no problem.

when u install linux -

it will create an automatic chainloader to boot windows with no problem.

this is the basic way if u dont have partition magic or anything

if u do

then like the rest said above

resize and move ur windows partition to the end of ur system..

then delete the rest.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • MSI's 32-inch 4K QD-OLED gaming monitor gets a big price cut for UK gamers and professionals by Paul Hill If you’re a gamer in the UK and looking for a monitor to upgrade to then check out the MSI MPG 321URX QD-OLED 31.5 Inch 4K UHD Gaming Monitor which you can now pick up for just 75% of its recommended retail price. The RRP of this monitor is £1,199, but thanks to this deal, you can get it for just £898.99 for a limited time (purchase link down below). With its 4K display, 240Hz refresh rate, and 0.03ms GTG, you’ll have the edge over other gamers by avoiding lag. At 31.5-inches, it’s the ideal monitor size if you’re sitting up close to it at a desk, you don’t want it too big at such a short range, but you also want to be able to see all the image details so 31.5-inches is a good balance. What makes QD-OLED stand out? There are loads of terms used to describe displays such as AMOLED, OLED, LED, and it can all get a bit confusing. This monitor adds yet another acronym called QD-OLED, which stands for Quantum Dot OLED. For you as a buyer, this means your new monitor has self-emitting pixels that deliver great black levels. It also features an enhanced sub-pixel arrangement for extra sharpness. The 31.5-inch 4K UHD monitor has a 3,840 x 2,160 pixel resolution making it ideal for playing games, but also watching movies in the best quality. Other important features worth mentioning are the 1.07 billion colors (10-bit) that the monitor can produce, its 99% DCI-P3 support, and DisplayHDR True Black 400 certification. All of these things make the monitor produce more accurate colours, potentially making it a good choice for professionals editing videos and photos too. Obviously, games will look good too. MSI has also packed in a fanless graphene heatsink which should help to increase the durability of the monitor long-term. This could extend the time until you need to buy a new monitor, further justifying its almost £900 price tag. Gaming and productivity features It’s not just the hardware that makes this monitor excel for gaming, it also comes with great software enhancements and connectivity options. On the software side, you get the following features: Smart Crosshair: Projects a customizable crosshair onto the screen to improve hip-fire accuracy and iron sights in first-person shooter games. Optix Scope: Gives you a built-in aim magnifier with multi-stage zooming and shortcut keys to quickly switch magnification levels. AI Vision: This automatically enhances brightness and colour saturation, particularly in dark areas of the screen, making it easier to see enemies hiding in shadows or dark corners. If you have two separate systems you want to connect to the monitor at once, you can do so with this monitor thanks to KVM support. You can view both sources with Picture-in-Picture and Picture-by-Picture modes. The MSI MPG 321URX QD-OLED 31.5 Inch 4K UHD Gaming Monitor also supports next-gen consoles with features like HDMI CEC Profile Sync, HDMI Variable Refresh Rate (VRR), and 4K:4K downscaling. In terms of connectivity and ergonomics, you get DisplayPort 1.4a, 2x HDMI 2.1 (CEC), USB Type-C with 90W power delivery, and a USB hub. The monitor uses a tilt-, swivel- & height-adjustable stand that is VESA compatible. Should you buy this monitor? The MSI MPG 321URX QD-OLED 31.5 Inch 4K UHD Gaming Monitor is definitely a product for serious gamers looking for top-tier visual fidelity and performance or content creators who need accurate colours and high resolution. Even with the significant discount, it’s still at a premium price and definitely not for everyone. If you are in one of the groups mentioned, then you should give serious consideration to buying the MSI MPG 321URX QD-OLED 31.5 Inch 4K UHD Gaming Monitor as it's the lowest price the monitor has been at on Amazon to date. MSI MPG 321URX QD-OLED 31.5 Inch 4K Gaming Monitor: £898.99 (Amazon UK) / RRP £1,199 This Amazon deal is U.K. specific, and not available in other regions unless specified. If you don't like it or want to look at more options, check out the Amazon UK deals page here. Get Prime, Prime Video, Music Unlimited, Audible or Kindle Unlimited, free for the first 30 days As an Amazon Associate we earn from qualifying purchases.
    • So they went from bloody awful, to still bloody awful? Pass...
    • Hmm, I have been setting folder colors in Teams as we got more and more clients, but they never synced to File Explorer on my Surface Pro 7+. So, all this while, thought the feature wasn't available yet. Guess it'll need to be changed via the SharePoint website for it to sync to File Explorer. Thanks for sharing 👍🏼
    • I got it on my s22 about a month ago, Europe
    • A script doesn't care if your book is written by AI or not, so, not sure how that changes anything. They'll just be further advertising your work in such. As for AGI, not sure how using AI in writing a book suddenly equates to me supporting AGI replacing everyone in the workplace. Either way, if such does happen, I'll just carry on with community services, AGI replacing such roles only speeds up the spreading of the message...
  • Recent Achievements

    • Enthusiast
      computerdave91111 went up a rank
      Enthusiast
    • Week One Done
      Falisha Manpower earned a badge
      Week One Done
    • One Month Later
      elsa777 earned a badge
      One Month Later
    • Week One Done
      elsa777 earned a badge
      Week One Done
    • First Post
      K Dorman earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      536
    2. 2
      ATLien_0
      272
    3. 3
      +FloatingFatMan
      201
    4. 4
      +Edouard
      200
    5. 5
      snowy owl
      138
  • Tell a friend

    Love Neowin? Tell a friend!