Partitioning Windows at the end?


Recommended Posts

Maybe I am misunderstanding your problem, but even if you download the ISOs, how would you use them. You have to boot from the burned ISO image, but you have no CD burner. It sounds to me like you'll have to buy the CDs. I recommend http://www.edmunds-enterprises.com/linux/index.php. I bought Gentoo 1.4 i686 from them as it the cheapest store around.

Heres what I want.

I have a 20GB Hdd.

Windows goes right to the end, from 15-20GB.

Then, I install Linux on the unpartitioned space, from 1-14.99GB of the HDD. All my RH9 ISOs reside on my Windows partition, so that i can install from there.

Then after installation, I use parted etc to delete my Windows partition, and use the rest for Linux.

My question: How do I get Windows to install right at the end?

uhm.......ok but how do you intend on using the isos to install them? If my memory serves me right last time I tried to read a linux cd (iso) in windows it didn't work out too well lol......so without a cd burner how do you intend to install linux?

are you asking to install windows at the end of your hard drive so that you can just remove it after you're done installing redhat? if so, you don't necessarily have to put it at the end. you can use a program like partitionmanager to delete the windows partition and then resize the linux one to utilize the unused space.

a) i dont think partiton magic can resize linuxtype filestructures

b) windows has to 'have' the first partition on the disk because it needs to keep boot info there.

So the best thing would be to just have two partitions, and use one for you home directory, that way when and if you ever switch distros or reinstall you dont loose all your data. Make shure to copy all the home info onto the partition before you mount it because most distros keep all kindsa configs etc in there.

Or head over to newegg.com every night at about 8pm and check there referbished items for a cheap cd burner, ive seen em low as 20$ refurb.

  seethru said:
uhm.......ok but how do you intend on using the isos to install them? If my memory serves me right last time I tried to read a linux cd (iso) in windows it didn't work out too well lol......so without a cd burner how do you intend to install linux?

RH9 installer supports HDD install, you just need to tell them where the ISOs are located.

HPMCommander, it seems that Linux will only utilise space in front of it, eg Linux is on 15-18GB, and Windows on 0-15GB. When you free up WIndows partition and give linux 18-20GB, Linux will only utilise 15-20GB, it will NOT utilise space 'behind'.

I don't want to speak for you, trenzterra, but if he doesn't have a CD burner, what makes you all think he paid for PartitionMagic? GNU Parted only allows resizing of a Linux-type partition if its start position remains fixed, so trenzterra is correct in wanting to install Linux at the beginning of the hard drive. However, I've never heard of an HDD install. I have heard of a network install, though. I am interested in it. Can you tell me more please?

  Mr. Static Void said:
I don't want to speak for you, trenzterra, but if he doesn't have a CD burner, what makes you all think he paid for PartitionMagic? GNU Parted only allows resizing of a Linux-type partition if its start position remains fixed, so trenzterra is correct in wanting to install Linux at the beginning of the hard drive. However, I've never heard of an HDD install. I have heard of a network install, though. I am interested in it. Can you tell me more please?

HDD Install works the same way as CD install, you download the ISOs and RH will read it from there...

I need help with network install too, can't figure out using PPPoE. If you can help me check my other thread.

I don't have Partition Magic too.

Or is this possible, I create a Linux partition, then create a Windows partition. Then I delete the Linux partition. This way, will Windows install at the end?

  lostspyder said:
b) windows has to 'have' the first partition on the disk because it needs to keep boot info there.

windows (at least NT) needs to have the boot files (NTLDR, boot.ini, ntdetect.com) on the first partition. windows can be installed on any partition you want. what i'm saying is, you can have a small partition (few MB) at the beginning of your drive, then linux partitions, then windows.

  gameguy said:
windows (at least NT) needs to have the boot files (NTLDR, boot.ini, ntdetect.com) on the first partition. windows can be installed on any partition you want. what i'm saying is, you can have a small partition (few MB) at the beginning of your drive, then linux partitions, then windows.

How do you move the boot files there?

Hi, I was wondering whether this would work:

First, I found a utility that's very flexible in partitioning.

I put my ISOs on a seperate partition at the second last part of the HDD. Then I put Windows XP at the last part of the HDD. Eg:

Linux - 1-5GB

ISOs - 6-7.5GB

Windows XP-7.5GB-18.6GB

Is that possible? Then I would use LiLo to set up multiboot...

everyone seems to have made it so copmlicated.

make a backup of whatever u DONT wanna loose.

install windows again.. - when it askes for partition and stuff

make 1 partition which is 15g, then make another which is 5 gig.. then go back and delete the 15 gig.. this will make ur partition for u, in ur desired location..

install or reinstall windows onto ur new partition..

then go back - and install linux.. as long u create the windows on a vfat (fat32) fs then u'll be be able to useitilse that space with no problem.

when u install linux -

it will create an automatic chainloader to boot windows with no problem.

this is the basic way if u dont have partition magic or anything

if u do

then like the rest said above

resize and move ur windows partition to the end of ur system..

then delete the rest.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Microsoft updates Media Creation Tool with a newer Windows 11 release by Taras Buria If you want to download a Windows 11 image or create an install media, the Media Creation Tool app is one of the best options—simple, fast, and, more importantly, official. While there are other useful alternatives, such as Rufus, Media Creation Tool remains the default choice for those who simply want a clean Windows 11 installation on a supported computer. Thanks to the latest MCT update, you will have to deal with fewer updates after installing Windows 11. Microsoft has quietly updated the Media Creation Tool app so that it downloads the latest Windows 11 release, version 24H2, with build number 26100.4349. This is the most recent public Windows 11 update (June 2025 Patch Tuesday), which eliminates the need to download large updates for your PC after installing the operating system. You can download Media Creation Tool from the official Windows 11 website. If you are familiar with it, this simple app can generate a Windows 11 image with the language you need or create a bootable USB media. Note that it only works on Windows, so Linux or macOS users have to download Windows images directly from the official website and then use apps that are available on their platforms. Another thing worth noting is Media Creation Tool is not the right choice if you want to install Windows 11 on an unsupported PC. In such a case, you can use MCT to download an ISO and then create a modified install media with apps like Rufus or Ventoy as described in our dedicated guide. If you want a more exotic Windows 11 Edition, try the Oofhours Media Tool, which allows you to select Windows 10 or 11, architecture (x64, x86, or ARM64), language, and edition. In addition to standard Home and Pro, the application can download non-mainstream SKUs, such as Enterprise, Education, or Professional for Workstations. Via: Deskmodder
    • Putting premium on your higher end laptops really makes it feel like your lower end laptops are worse.
    • Funny enough just removed insta account and whatsapp is next. Less power needed now
    • If you only show the stop code and what failed for less than 2 seconds, what use is it?
    • How about using all that hot air Zuck spews? That surely can power something...
  • Recent Achievements

    • Conversation Starter
      Kavin25 earned a badge
      Conversation Starter
    • One Month Later
      Leonard grant earned a badge
      One Month Later
    • Week One Done
      pcdoctorsnet earned a badge
      Week One Done
    • Rising Star
      Phillip0web went up a rank
      Rising Star
    • One Month Later
      Epaminombas earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      538
    2. 2
      ATLien_0
      207
    3. 3
      +FloatingFatMan
      174
    4. 4
      Michael Scrip
      148
    5. 5
      snowy owl
      119
  • Tell a friend

    Love Neowin? Tell a friend!