Partitioning Windows at the end?


Recommended Posts

Maybe I am misunderstanding your problem, but even if you download the ISOs, how would you use them. You have to boot from the burned ISO image, but you have no CD burner. It sounds to me like you'll have to buy the CDs. I recommend http://www.edmunds-enterprises.com/linux/index.php. I bought Gentoo 1.4 i686 from them as it the cheapest store around.

Heres what I want.

I have a 20GB Hdd.

Windows goes right to the end, from 15-20GB.

Then, I install Linux on the unpartitioned space, from 1-14.99GB of the HDD. All my RH9 ISOs reside on my Windows partition, so that i can install from there.

Then after installation, I use parted etc to delete my Windows partition, and use the rest for Linux.

My question: How do I get Windows to install right at the end?

uhm.......ok but how do you intend on using the isos to install them? If my memory serves me right last time I tried to read a linux cd (iso) in windows it didn't work out too well lol......so without a cd burner how do you intend to install linux?

are you asking to install windows at the end of your hard drive so that you can just remove it after you're done installing redhat? if so, you don't necessarily have to put it at the end. you can use a program like partitionmanager to delete the windows partition and then resize the linux one to utilize the unused space.

a) i dont think partiton magic can resize linuxtype filestructures

b) windows has to 'have' the first partition on the disk because it needs to keep boot info there.

So the best thing would be to just have two partitions, and use one for you home directory, that way when and if you ever switch distros or reinstall you dont loose all your data. Make shure to copy all the home info onto the partition before you mount it because most distros keep all kindsa configs etc in there.

Or head over to newegg.com every night at about 8pm and check there referbished items for a cheap cd burner, ive seen em low as 20$ refurb.

  seethru said:
uhm.......ok but how do you intend on using the isos to install them? If my memory serves me right last time I tried to read a linux cd (iso) in windows it didn't work out too well lol......so without a cd burner how do you intend to install linux?

RH9 installer supports HDD install, you just need to tell them where the ISOs are located.

HPMCommander, it seems that Linux will only utilise space in front of it, eg Linux is on 15-18GB, and Windows on 0-15GB. When you free up WIndows partition and give linux 18-20GB, Linux will only utilise 15-20GB, it will NOT utilise space 'behind'.

I don't want to speak for you, trenzterra, but if he doesn't have a CD burner, what makes you all think he paid for PartitionMagic? GNU Parted only allows resizing of a Linux-type partition if its start position remains fixed, so trenzterra is correct in wanting to install Linux at the beginning of the hard drive. However, I've never heard of an HDD install. I have heard of a network install, though. I am interested in it. Can you tell me more please?

  Mr. Static Void said:
I don't want to speak for you, trenzterra, but if he doesn't have a CD burner, what makes you all think he paid for PartitionMagic? GNU Parted only allows resizing of a Linux-type partition if its start position remains fixed, so trenzterra is correct in wanting to install Linux at the beginning of the hard drive. However, I've never heard of an HDD install. I have heard of a network install, though. I am interested in it. Can you tell me more please?

HDD Install works the same way as CD install, you download the ISOs and RH will read it from there...

I need help with network install too, can't figure out using PPPoE. If you can help me check my other thread.

I don't have Partition Magic too.

Or is this possible, I create a Linux partition, then create a Windows partition. Then I delete the Linux partition. This way, will Windows install at the end?

  lostspyder said:
b) windows has to 'have' the first partition on the disk because it needs to keep boot info there.

windows (at least NT) needs to have the boot files (NTLDR, boot.ini, ntdetect.com) on the first partition. windows can be installed on any partition you want. what i'm saying is, you can have a small partition (few MB) at the beginning of your drive, then linux partitions, then windows.

  gameguy said:
windows (at least NT) needs to have the boot files (NTLDR, boot.ini, ntdetect.com) on the first partition. windows can be installed on any partition you want. what i'm saying is, you can have a small partition (few MB) at the beginning of your drive, then linux partitions, then windows.

How do you move the boot files there?

Hi, I was wondering whether this would work:

First, I found a utility that's very flexible in partitioning.

I put my ISOs on a seperate partition at the second last part of the HDD. Then I put Windows XP at the last part of the HDD. Eg:

Linux - 1-5GB

ISOs - 6-7.5GB

Windows XP-7.5GB-18.6GB

Is that possible? Then I would use LiLo to set up multiboot...

everyone seems to have made it so copmlicated.

make a backup of whatever u DONT wanna loose.

install windows again.. - when it askes for partition and stuff

make 1 partition which is 15g, then make another which is 5 gig.. then go back and delete the 15 gig.. this will make ur partition for u, in ur desired location..

install or reinstall windows onto ur new partition..

then go back - and install linux.. as long u create the windows on a vfat (fat32) fs then u'll be be able to useitilse that space with no problem.

when u install linux -

it will create an automatic chainloader to boot windows with no problem.

this is the basic way if u dont have partition magic or anything

if u do

then like the rest said above

resize and move ur windows partition to the end of ur system..

then delete the rest.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Nice! My $100 refurbished iPad 8 that I bought last year for a small project (and still runs like new cuz it's been mostly in storage the past several months) will get this v26 upgrade. I'm definitely gonna scope out OS26 on this device before upgrading my also-supported refurbished iPhone SE 3rd Gen (only got it for the 5G UW support).
    • Hello, The separate discussion about VLC has been moved to its own thread at  Regards, Aryeh Goretsky  
    • Hello, I am guessing this is the result of using a third-party tweaking tool instead of changing things within Windows settings. Windows 11 has a decent set of configuration options for the display, but they tend to be scattered throughout the operating system due to fragmentation of product ownership/inconsistent standards being applied by Microsoft. There are a few places in Windows 11 where you can modify the various display settings in order to get them to your liking: Under Settings → System → Display you can stroll down to the Scale & layout section and change the Scale and Display resolution settings to whatever you prefer.  For the Scale option, you can click on the text box to choose between the various pre-populated settings.  If none of those are exactly what you are looking for, click on the caret ("") caret to open the Custom scaling setting (also available under Settings → Display → Custom scaling).  I would recommend this as an option of last resort as this can cause display issues in various programs. I strongly recommend using the screen's native Display resolution here; it should show up as the "(Recommended)" resolution.  If it does not, you may need to install your monitor's profile information file (basically, a device driver for your monitor) to get the correct setting. Another place to look at making changes to fonts is under Accessiblity → Text size.  There is a slider bar for changing the text size from 100% to 225% there. You can try making changes to the ClearType settings.  It's a little bit finer-grained than the others, but it may make the text easier to view on the display.  Run the ClearType Text Tuner (filename: CTTUNE.EXE) and go through the wizard. You may want to do this several times under different lighting conditions or times of the day to figure out what works best for you overall. Lastly, you may want to look into using a dedicated assistive screen technology program from a third-party.  Microsoft provides a Screen Magnifier and a Narrator for text-to-speech, but they provide only basic functionality, and you may find that a third-party program works a lot better.  The pros of this is that third-party assistive technology programs tend to work quite well under Windows; Microsoft has historically worked closely with third-party developers of assistive technologies.  The cons of this are that such tools tend to be on the expensive side, since they are often sold to schools, businesses, or paid for by insurance companies, not individuals. Regards, Aryeh Goretsky  
    • Totally agree with you. I think people, especially on tech sites, need to realize that they’re the minority. Microsoft isn’t going to waste time on things that, in the big picture, don’t matter to the majority.
    • I think a lot of people here are too young to even remember Aqua.
  • Recent Achievements

    • Dedicated
      MadMung0 earned a badge
      Dedicated
    • Rookie
      CHUNWEI went up a rank
      Rookie
    • Enthusiast
      the420kid went up a rank
      Enthusiast
    • Conversation Starter
      NeoToad777 earned a badge
      Conversation Starter
    • Week One Done
      VicByrd earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      506
    2. 2
      ATLien_0
      267
    3. 3
      +FloatingFatMan
      257
    4. 4
      Edouard
      203
    5. 5
      snowy owl
      178
  • Tell a friend

    Love Neowin? Tell a friend!