Digital Speedometer


Recommended Posts

Okay so I am looking at buying a car so I can eventually move out and keep my current job and I am looking at buying a 2006 For Focus LX 1.8 but I want to get a Digital Speedometer, Fuel Indicator and RPM Indicator for the car but I've searched online and cant find ANYTHING at all > <.

Anyone know where I can get a Digital Speedometer etc online.

Link to comment
https://www.neowin.net/forum/topic/1107543-digital-speedometer/
Share on other sites

Any reason why?

You can get devices that hook into the car's diagnostics bus and give you readouts like this, but they're invariably slow to update ? the fastest I could ever get a dedicated diagnostics system to read this stuff was about 1Hz on a modern CAN bus when I was doing research for my degree. Dedicated consumer digital reader devices may fake it faster by interpolating, though.

Also, it's worth noting that many, many cars these days use digital readouts already ? they just have an analogue dial at the end. I don't think you'll find a single new car on the market today that has a mechanical connection all the way to the dashboard. I had a 2005 Mazda (who were owned by Ford at the time) that used such a digital system.

Back on topic, I can't actually help other than stuff like this for iOS: http://sturminteractive.com/2011/07/26/gopoint-technology-gl1-odb-ii-for-ios/ ? my system wasn't designed to be actually used while driving, only recording for later analysis. If you actually end up replacing the car's stock instruments with something else, make sure you do your research thoroughly since having a device that doesn't have an approved calibration can be tricky, law wise, in some areas.

If you're not replacing the car's internal instruments then this post wraps around to the beginning ? why?

I want to get some with Digital Readouts because if I can see in a clear number the speed I am going nice and big on the dashboard it helps.

I have had a few driving lessons and with the Dial it annoys me because I am looking at this needle and I like to see clear numbers in front of me. I just find it easier.

Like you said about them being slow to update. It doesn't even need to be a full replacement just something with a Digital Readout telling me my speed that is apart of the Dashboard.

You can get a car that has them built in - the only car I can think of in that class is the Honda Civic (2006+, at least in the US market). I know it's not an ideal solution, but ikenndac has a good point

Never really liked the look of a Honda Civic Interior TBH.

Just looking for a nice, decent car for ?2,500 that I can add a Digital Read Out too while keeping the old one I guess.

If you have a phone or gps enabled device, then you can download digital speedometer app.

Go to app store and look up then download it to use it while you use it in your car..

Or look for aftermarket shops and you can replace the analog dashboard with your new digital dashboard.

Never really liked the look of a Honda Civic Interior TBH.

Just looking for a nice, decent car for ?2,500 that I can add a Digital Read Out too while keeping the old one I guess.

My aunt has a Suzuki Areo and it had a stock digital speedo, it was inaccurate at times (I find the one in the civic's to be the same case) Nothing beats a dial.

My aunt has a Suzuki Areo and it had a stock digital speedo, it was inaccurate at times

You know, my Mazda was the same. Then, when I was doing the research mentioned in my post further up I noticed that the speed figure received straight from the car's diagnostics bus was much more accurate, and the display was intentionally inaccurate (by around 5% faster than I was actually travelling).

Turns out it's legal for a speedo to be calibrated to read up to 10% too fast, but not for it to read too slow, so car manufacturers intentionally make their speedos a bit too fast to give them a safer margin.

It *also* turns out that all the cars with dials I've had since then are the same, but because you read it as "almost 50mph" instead of "47mph", you notice it a bit less.

If you can't get an in dash replacement, I would honestly suggest you learn how to use an analogue speedo.

Do not try and use a GPS device as a speedo. There are tons of reasons why, including inaccuracy, but also in most countries you will find it's illegal due to the screen or where it's placed or whatever else.

I'd recommend getting a car with dials until you learn how to drive. I'm sorry, but "I don't like it" is ridiculous, you need to know how to read the needles first, then go to a digital.

My car has a standard cluster, with digital speed read out, it came standard with the car. Addons and GPS are not accurate.

You know, my Mazda was the same. Then, when I was doing the research mentioned in my post further up I noticed that the speed figure received straight from the car's diagnostics bus was much more accurate, and the display was intentionally inaccurate (by around 5% faster than I was actually travelling).

Turns out it's legal for a speedo to be calibrated to read up to 10% too fast, but not for it to read too slow, so car manufacturers intentionally make their speedos a bit too fast to give them a safer margin.

It *also* turns out that all the cars with dials I've had since then are the same, but because you read it as "almost 50mph" instead of "47mph", you notice it a bit less.

This was a tolerance thing with cable drive speedos. This doesn't occur in new vehicles. Our shop diagnostic equipment can confirm this too.

Anyway, people don't seem to worry about their speedo being out, just look at the majority of people who have put biggers wheels on their car, and not had the speedo re-calibrated or the default wheel setting changed in the ECU.

This was a tolerance thing with cable drive speedos. This doesn't occur in new vehicles. Our shop diagnostic equipment can confirm this too.

I think you misread my post. While doing the research, I did a 20 minute-long run at 100mph indicated (circular track at Millbrook in the UK). The speedo read 100 mph the whole way, while the ODB bus was reading 96 mph the whole way. The display had an intentional increase.

I think most modern cars have digital dials (but in analog format) I know my Grand Prix's analog gauges are connected to the car's data bus, no analog connection, just data and power. the ODB2 bus though updates a lot less frequently... if its a newer car you might be able to find a gauge cluster that replaces your "analog" gauges with digital ones

but seriosusly though, learn to drive with gauges... even new digital cluster cars have analog gauges on them shown graphically

I'd recommend getting a car with dials until you learn how to drive. I'm sorry, but "I don't like it" is ridiculous, you need to know how to read the needles first, then go to a digital.

I 100% agree. Learn to drive your car the "normal" way, then look at changes.

I 100% agree. Learn to drive your car the "normal" way, then look at changes.

Honestly, I quite agree. If you can't tell how fast you are going by either looking at the dial (which come on, is not a difficult task AT ALL) or by just a judgement of speed, I do not want you driving on the same roads as me. Fortunately, OP is in England.

Let's face it, learn it the "normal" way, because 95%+ of the cars have analog dials. Some may have digital only or a combination of both. Just learn or adapt.

I wouldn't bother, just learn the analogue way (is it even learning?) you tilt your eyes slightly now and then to see the speed. Honestly as you learn to drive you'll find you're able to judge the speed when you're used to the car, same way you learn to change gear by hearing the revs.

If you can't learn to drive with an analogue speedo (everyone else has). Then i doubt you'll be able to put a dash replacement in the car :laugh:

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Microsoft releases new Windows 11 Media Creation Tool with the latest updates by Taras Buria Patch Tuesday updates arrive every month, bringing users new features and security updates. To make sure customers have access to the most recent images, Microsoft also releases updates to the Media Creation Tool app, its official utility for Windows 11 installation. Today, the company pushed new ISOs to Media Creation Tool, allowing you to create images with the June 2026 Patch Tuesday updates. With the latest update, the Media Creation Tool now downloads KB5094126. It is Windows 11 version 25H2, build 26200.8655, which is also available via Windows Update. Note that the app itself remains on the previous version, which you can check in Properties > Details. The only change is that it now downloads a more recent Windows 11 build, so the only way to check is to download an ISO. The June 2026 Patch Tuesday update is a special release for Windows 11, as it brings a new performance profile to make the operating system more responsive and snappier when rendering various user interface surfaces, including the Start menu, quick settings, and more. It does so by spiking processor speeds for a brief moment, resulting in higher loads for a second or two. The so-called “Low latency profile” is rolling out gradually, but you can force-enable it with the ViVeTool app. Other changes include webcam improvements, Task Manager updates, shared audio support, and more. You can download the Media Creation Tool app from the official Microsoft website using this link. Besides MCT, Microsoft lets you download Windows 11 ISO as a file directly from the official Windows 11 website. However, you will need a third-party app to write it to your USB drive. Check out this guide if you want to know how to do that.
    • Louis Rossmann suing Samsung over "990 Pro SSD warranty scam" by Sayan Sen Back in 2023, if you recall, Neowin reviewer Robbie Khan had a dispute with Samsung over his 990 Pro SSD, which was rapidly losing its health. After significant back and forth, the tech giant had finally released firmware to "stop" the issue. Interestingly, its previous flagship at the time, the 980 Pro was also facing problems leading to two consecutive sets of firmware fixes. Three years later, it looks like a similar conflict has now broken out between tech repair entrepreneur YouTuber Louis Rossmann and Samsung, as it has escalated into a threatened lawsuit after the company allegedly refused to appropriately replace a failing 990 Pro SSD that remained under warranty. According to Rossmann, a 4TB Samsung 990 Pro NVMe SSD purchased for approximately $330 less than two years ago, began experiencing major hiccups and issues, even though he claims it had been operated under ideal cooling conditions. It was installed in a RAID 1 array and cooled by a heatsink and dual high-speed fans. However the drive reportedly started dropping out of the array, exhibiting controller-level failures that eventually became not useable in any meaningful way. Rossmann said Samsung’s support process was marked by delays and confusion from the very start. After initially contacting the wrong regional support channel, he was redirected to Samsung’s memory support division where he submitted detailed diagnostics, logs, and proof of purchase. Rossmann runs a repair company and owns an ACE Lab PC-3000 machine, which is a professional-grade data recovery equipment. As such, he had been confident in his diagnostics. Samsung even seemingly acknowledged that later. Regardless, Rossmann claims that his initial support ticket was automatically closed before a full 24-hour response window had elapsed, forcing him to reopen the case and resubmit documentation. The controversy however intensified further from here after Samsung accepted the drive for warranty evaluation but later returned it with a repair report stating that the drive had passed its testing and that the SSD had been verified as functional. Rossmann strongly disputed those claims citing that his own independent testing on PC-3000 showed write speeds reducing to as low as 40–60 MB/s before the drive failed entirely. Samsung subsequently informed him that the SSD had been reset and reflashed, passing internal stress tests. However, the company also stated that replacement units were unavailable due to an industry-wide memory shortage and suggested that a refund process could be initiated if further testing confirmed the fault. Thus, to settle, the company offered a refund of $330, the amount that was initially paid by him to make the purchase. Here, Rossmann pointed out the seeming hypocrisy of the tech giant as in how no Samsung drive was apparently allocated for warranty replacements, but they were abundantly available for retail sales especially when using business accounts. As you can see, Rossmann is indeed right, there are Samsung 990 Pro 4TB SSDs on Amazon currently for $950 (shipped and sold by first-party Amazon US itself), and they are also available on Samsung's own store too, albeit for an even higher price of $1100. Thus Rossmann argues that Samsung’s inability or unwillingness to provide a replacement while the same model remains available for purchase at significantly higher market prices reflects a failure to honor its warranty obligations. He has issued a formal 60-day notice and says he intends to file suit in Texas small claims court, asserting that companies should face greater costs for denying legitimate warranty claims than for fulfilling them. You can check out the full video titled "Samsung's 990 Pro SSD warranty policy is a scam; I'm taking them to court," at the link below. Source and image: Louis Rossmann (YouTube) As an Amazon Associate we earn from qualifying purchases
    • Was it too much to ask to show the icon in this article?
    • Frankly, I blame whoever is writing such articles. "A big improvement/update and/or new feature is now available to everyone! Also, use this unofficial tweak tool to enable it because it actually isn't available to you yet officially and might not in fact even be entirely ready or whatever, hence why it is perhaps not enabled for you*. But it's great and you should enable it!" I mean there's nothing wrong with sharing info about some feature you might need to enable via unofficial means, of course. It's just that these articles tend to essentially end up being two news pieces in one, and one of them tends to be a bit misleading. (*Yes, yes, the "it's a controlled rollout!" thing. Not a fan of that one either. The argument, not the actual rollout.)
  • Recent Achievements

    • Week One Done
      davidbazooked earned a badge
      Week One Done
    • One Month Later
      Jamswaz earned a badge
      One Month Later
    • Week One Done
      Jamswaz earned a badge
      Week One Done
    • Rookie
      Marzoid went up a rank
      Rookie
    • Community Regular
      coch went up a rank
      Community Regular
  • Popular Contributors

    1. 1
      +primortal
      509
    2. 2
      PsYcHoKiLLa
      185
    3. 3
      +Edouard
      158
    4. 4
      Steven P.
      83
    5. 5
      ATLien_0
      75
  • Tell a friend

    Love Neowin? Tell a friend!