Help with installing new RAM


Recommended Posts

I just had a 1gb stick of ram go bad in my Dell XPS 410. I had only 2gb total before one of my sticks went bad. I am pretty sure that is the case, cause I've researched it online extensively. It would sometimes randomly crash, then make a beeping noise and show the numbers 3 and 4 on the front of my tower and it wouldn't boot at first, but if I kept trying it would eventually boot. It would even stay on for awhile sometimes, but then it would eventually crash. I'm just using one stick and all seems to be well for the time being. Of course I am thinking about buying ram, but the question is which type and how much? I looked at the old chip, and it says Samsung on it. I have read that Dell uses cheap ram. I believe it is the 533mhz PC5300 kind, but I have read that my motherboard supports the 800mhz PC6400. I'm thinking 4gb should be enough, but I want to know which type of ram I should buy? Also, is it better to go with two 2gb's, or 4 1gb sticks? I have 4 slots, and like I said my motherboard supposedly supports ram up to 800mhz PC6400. Is it worth it to go to the faster ram? I have never updated my BIOS. That's not going to be a problem, is it? I read online that my board can actually support 8gb of ram as long as it's under 64 bit Windows 7, which it is. I thought I read that I would need to update my BIOS for the 8gb of ram to show up. I have been hesitant to do so, cause I heard if things go wrong it can brick your motherboard. I'm pretty sure I don't need to update my BIOS if all I'm doing is using 4gb of ram, but I am not 100% sure. Does anyone know for sure? I am probably going to pick it up at Walmart or Staples, so can anyone point me in the direction of the ram I should buy from their sites? I don't play games, I just use it for surfing the net with Firefox and many tabs open, playing music, watching movies and TV shows. I'm assuming 4gb of ram, or maybe even 6gb should be enough for just standard Windows stuff like that. I got by on 2gb of ram pretty decently, but there are times Firefox would freeze for a couple of seconds here and there. I was thinking maybe Kingston. I will probably upgrade to Win8 in the near future, so will 4gb be enough? Let me know! Thanks!

I just had a 1gb stick of ram go bad in my Dell XPS 410. I had only 2gb total before one of my sticks went bad. I am pretty sure that is the case, cause I've researched it online extensively. It would sometimes randomly crash, then make a beeping noise and show the numbers 3 and 4 on the front of my tower and it wouldn't boot at first, but if I kept trying it would eventually boot. It would even stay on for awhile sometimes, but then it would eventually crash. I'm just using one stick and all seems to be well for the time being. Of course I am thinking about buying ram, but the question is which type and how much? I looked at the old chip, and it says Samsung on it. I have read that Dell uses cheap ram. I believe it is the 533mhz PC5300 kind, but I have read that my motherboard supports the 800mhz PC6400. I'm thinking 4gb should be enough, but I want to know which type of ram I should buy? Also, is it better to go with two 2gb's, or 4 1gb sticks? I have 4 slots, and like I said my motherboard supposedly supports ram up to 800mhz PC6400. Is it worth it to go to the faster ram? I have never updated my BIOS. That's not going to be a problem, is it? I read online that my board can actually support 8gb of ram as long as it's under 64 bit Windows 7, which it is. I thought I read that I would need to update my BIOS for the 8gb of ram to show up. I have been hesitant to do so, cause I heard if things go wrong it can brick your motherboard. I'm pretty sure I don't need to update my BIOS if all I'm doing is using 4gb of ram, but I am not 100% sure. Does anyone know for sure? I am probably going to pick it up at Walmart or Staples, so can anyone point me in the direction of the ram I should buy from their sites? I don't play games, I just use it for surfing the net with Firefox and many tabs open, playing music, watching movies and TV shows. I'm assuming 4gb of ram, or maybe even 6gb should be enough for just standard Windows stuff like that. I got by on 2gb of ram pretty decently, but there are times Firefox would freeze for a couple of seconds here and there. I was thinking maybe Kingston. I will probably upgrade to Win8 in the near future, so will 4gb be enough? Let me know! Thanks!

One of the problems is, there is a lot of conflicting information about how much ram my board supports total and how much per slot. The manual says 4gb total and 1gb per slot, but people online say it can support up to 8gb as long as it's under 64 bit Windows. I think you might have to update the BIOS in order for it to display properly. I figure 4gb of ram should be good enough. The main questions I need answered are: Which type of ram should I buy? 533mhz PC5300, or 800mhz PC6400? Also, two 2gb sticks, or 4 1gb sticks? Will I need to update my BIOS in order for the 4gb to show up, or is that just for the 8gb? Please someone let me know, so I can buy the correct RAM as soon as possible! Running Windows 7 with Firefox open and several tabs is not fun on only 1gb of RAM.
Link to comment
https://www.neowin.net/forum/topic/1108087-help-with-installing-new-ram/
Share on other sites

http://support.dell.com/support/edocs/systems/xps410/en/SM_EN/specs.htm

4GB

PC6400 is better, but you won't see much difference between that and PC5300. If price is about the same, get the faster RAM.

There might be a BIOS update for that, but I don't know if they ever upgrade the maximum memory with an update. I would get 2 sticks or 4, whichever is cheaper. They'll perform about the same. As long as you have pairs, you'll get dual-channel. 2 sticks is better if you plan on using in another system or adding more later.

http://support.dell....SM_EN/specs.htm

4GB

PC6400 is better, but you won't see much difference between that and PC5300. If price is about the same, get the faster RAM.

There might be a BIOS update for that, but I don't know if they ever upgrade the maximum memory with an update. I would get 2 sticks or 4, whichever is cheaper. They'll perform about the same. As long as you have pairs, you'll get dual-channel. 2 sticks is better if you plan on using in another system or adding more later.

Thanks for replying. So I shouldn't need to do a BIOS update if I only upgrade to 4gb? What about 6gb or 8gb? As I said, there is conflicting information out there. I have to find the link, but there is a guy out there that showed pictures to prove that he upgraded to 8gb of RAM. They say the manual says 4gb, because at the time 64 bit operating systems weren't really widely used. I'm probably just going to go with 4gb of ram, though. Is Kingston a good brand? I've read that it is. I just hope I don't have to update my BIOS in order for Win7 to see the RAM. I don't think I will have to, but I'm not certain. Has anyone ever heard of that happening?

don't start messing with your BIOS, this is an older board so it's not worth it. stay with what the manual says in terms of max memory and memory speed. i'm sorry, maybe i missed it, but how many slots do you have there? anyway, if it keeps acting up you need to consider the fact that it might be the connectors going back - if indeed this is an older board.

Thanks for your reply! 4 slots. Like I said, the manual says 4gb total and 1gb per slot, but there are many websites that claim you can get it all the way up to 8gb total by using 2gb per slot. I might just do 4gb total, but I'm really torn on whether I should go with two 2gb sticks, or 4 1gb sticks? I might just buy one 2gb and try it out in one slot. It won't destroy my board if it doesn't work, right? It should just beep and not allow me to boot, right? I'm pretty sure the one 2gb chip will work in one slot, but the question is if I need a new BIOS update in order for it to recognize it. I don't think I do, but who knows?

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Nice, hope they *finally* fixed the issue with the NTFS driver where the system would completely brick during large file copies using the built in driver. It's been broken for years requiring me to use the older, slower, NTFS-3G FUSE driver.
    • Windows 11 KB5094126 BSODing, freezing, forcing BitLocker lockout, breaks OneDrive, and more by Sayan Sen Microsoft released Windows 11 KB5094126 and KB5093998 last week as the latest Patch Tuesday updates. Following that the company also published the accompanying dynamic updates under KB5094149, KB5095971, and KB5094156. While Microsoft has so far not acknowledged any major problems with the release, some users online are running into problems. These range from OneDrive and Dropbox access issues, BitLocker recovery lockouts, to blue screens and BSODs. The most common one seems to be happening with HP systems wherein affected users say they hit 0xc0430001 BSOD (blue screen of death) error code after the KB5094126 update. We wonder if this could be related to the recent bug we covered on HP devices wherein the ongoing Secure Boot certificate updates are leading to similar issues. While we are not certain, users affected by this issue likely need to ensure that the boot.stl file is included on the installation media (such as a USB installer or ISO), if the above-mentioned dynamic updates are deployed. If this file is missing, computers may fail to boot from the installation media and could display the error 0xc0430001. This STL file is used by Secure Boot to verify that the boot files are trusted, so it must match the same Windows version and system architecture. To ensure the file is included, Microsoft recommends using the Update WinPE script, which automatically updates the image and handles the required files. Alternatively, you can manually copy the boot.stl file from the Windows\Boot\EFI folder on a Windows device and place it in the matching folder on your installation media before deploying the updated image. Aside from blue screening some users also note their systems have been freezing following the update. This could be happening to Lenovo PCs specifically. In the case of the OneDrive and Dropbox access issues, a user figured out that there could be a conflict with UAC. He explained: "Okay, so I did some digging, and in our environment KB5094126 breaks OneDrive and Dropbox in Explorer. I went through all our GPOs and found out that the combination of disabling UAC and having my user being a local admin breaks OneDrive in Explorer. ... If I enable UAC again, then it works, even with KB5094126 still installed." Hopefully, Microsoft will look into these issues. Source: Microsoft forum (link1, link2, link3, link4), Reddit (link1, link2, link3, link4)
    • It is when it's a desktop in my house though for a PC that's lightly used and not really important when it is. If it was a laptop, it would be a different story. The real solution is varied and begins starting at post #22 in that thread.
    • Win11Debloat 2026.06.14 by Razvan Serea Win11Debloat is a lightweight, easy to use PowerShell script that allows you to quickly declutter and customize your Windows experience. It can remove pre-installed bloatware apps, disable telemetry, remove intrusive interface elements and much more. The script also includes many features that system administrators and power users will enjoy. Such as a powerful command-line interface, support for Windows Audit mode and the option to make changes to other Windows users. All changes made by Win11Debloat can be easily reversed, and most removed apps can be restored via the Microsoft Store. A full guide on how to undo the changes is available here. Win11Debloat features: Below is an overview of the key features and functionality offered by Win11Debloat. Please refer to the wiki for more information about the default settings preset. Remove a wide variety of preinstalled apps. Click here for more info. Disable telemetry, diagnostic data, activity history, app-launch tracking & targeted ads. Disable tips, tricks, suggestions & ads across Windows. Disable Windows location services & app location access. Disable Find My Device location tracking. Disable 'Windows Spotlight' and tips & tricks on the lock screen. Disable 'Windows Spotlight' desktop background option. Disable ads, suggestions and the MSN news feed in Microsoft Edge. Hide Microsoft 365 ads on the Settings 'Home' page, or hide the 'Home' page entirely. Disable & remove Microsoft Copilot. Disable Windows Recall. Disable Click to Do, AI text & image analysis tool. Prevent AI service (WSAIFabricSvc) from starting automatically. Disable AI Features in Edge. Disable AI Features in Paint. Disable AI Features in Notepad. Disable the Drag Tray for sharing & moving files. Restore the old Windows 10 style context menu. Turn off Enhance Pointer Precision, also known as mouse acceleration. Disable the Sticky Keys keyboard shortcut. Disable Storage Sense automatic disk cleanup. Disable fast start-up to ensure a full shutdown. ...and more. Once you’ve downloaded the Win11Debloat file (Get.ps1), just follow these quick steps: Locate the Get.ps1 script file. Right-click the file and select Run with PowerShell from the context menu. If prompted by User Account Control (UAC), select Yes to grant the script the necessary administrative permissions. Win11Debloat 2026.06.14 changes: This is a minor release that hopefully addresses the false positives in Windows Defender and Bitdefender that prevented users from downloading and/or running Win11Debloat. Refactor Get-RegFileOperations.ps1 to address false positives by @Raphire in #626 Add logging around WinGet app retrieval and increase timeout to 20s by @Raphire Download: Win11Debloat 2026.06.14 | Open Source View: Win11Debloat Home Page | Screenshots 1| 2 Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • Week One Done
      Jeroen Wilms earned a badge
      Week One Done
    • Week One Done
      rolfus earned a badge
      Week One Done
    • One Month Later
      Leroy Jethro Gibbs earned a badge
      One Month Later
    • Conversation Starter
      flexorcist earned a badge
      Conversation Starter
    • One Month Later
      AndreaB earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      508
    2. 2
      +Edouard
      198
    3. 3
      PsYcHoKiLLa
      138
    4. 4
      ATLien_0
      90
    5. 5
      Steven P.
      81
  • Tell a friend

    Love Neowin? Tell a friend!