[RANT] I wish .NET would burn in hell!


Recommended Posts

First, let me say that I'm not a developer. Whether .Net is a good platform for programming is out of my realm of expertise, nor do I care. As someone who services/maintains multiple PCs at work and on the side, .NET infuruates me. Effing large installers to download, time seems to stop as the POS installs itself and once thats done, you get to download/install patch after patch that all take what is IMO, an unreasonable amount of time to actually install. The fun is then multiplied several times over should you have applications that require different versions of .Net. Microsoft either needs to release a single update rollup for supported versions of .NET or package the installer fully updated. I sincerely hope that .NET dies a firey death sooner rather than later.

Sorta related but Microsft also wastes your time with a fresh Windows 7 Install. Rather than offer you SP1 straight away, they want you to download a **** ton of pre SP1 patches and then offer you SP1. Completely unnecessary! I downloaded the SP1 installer, patched a fresh W7 install, and proceeded to install all post SP1 updates without a problem. Office 2010? Same **** there too!

Eff you Microsoft...just eff you!

[RANT/OFF]

Link to comment
https://www.neowin.net/forum/topic/1109973-rant-i-wish-net-would-burn-in-hell/
Share on other sites

SCCM does it for me. OSD, patch management, desired configuration, config audits, the works.

We went to SCCM for our domain, and gawd was it expensive... over $79,000 just for SCCM and the licenses.. server licenses are $1,500 each... $150 per workstation...

If you were halfway decent at your job, you would have an imaging system setup so you would only have to install updates once.

Don't be a dick. I work for a non-profit. Money is tight and I'm not permitted to purchase snazzy applications like you get. I do use some free imaging software on the newer PCs being donated to save time. We're still running Server 2003 R2 and most of our PCs are donated = few years old by the time I get them.

Your rant has very little to do with the .NET programming language itself.

Yes...you picked up on that I see.

Still beats Java. :p

Unfortunately, you're right, but only from a security standpoint.

I've been trying to get a silent install of Net 4.5 for months. I need to go back and try 4.0, which is the one I need, but though I'd go ahead and get the newest. We're looking at moving to SCCM, but I didn't have time to play with it. Using ZENworks as I'm familiar with it. Just can't get this to work correctly.

Will WSUS install 4.5 or just the updates to installed versions?

Your rant has very little to do with the .NET programming language itself.

Considering .NET isn't a programming language..it's a group of languages and related technologies, I don't see how it could.

Also I vote for slipstreaming as well. Massive time saver.

We went to SCCM for our domain, and gawd was it expensive... over $79,000 just for SCCM and the licenses.. server licenses are $1,500 each... $150 per workstation...

Either I got really lucky, or you got royally screwed. We licensed about 50 copies of Forefront Endpoint Protection 2010 and when they 2012 version came around, we were automatically entitled to the new version. Since they changed Forefront to System Center Endpoint Protection 2012, and integrated It into SCCM, we got a license for SCCM and a SQL Server 2008 Standard license included. We originally paid less than $3000 for 3 years.

.NET updates are indeed really annoying and incredibly slow. I'm not talking about an enterprise system here but whenever I've got to fix computers for friends and family the numerous .NET updates always make everything take AGES.

.NET is going no where, if anything it will get bigger over time

I hope your kidding, .NET is great for developing tools, remember MFC :/. Applications can greatly benefit from .net especially with portability.

If you were halfway decent at your job, you would have an imaging system setup so you would only have to install updates once.

You can slipstream .NET into any windows installer using free tools that are out there. If your just updating workstations, you could always update all workstations at once with a login script :p.

I've got to fix computers for friends and family the numerous .NET updates always make everything take AGES.

You could always stop volunteering to be so helpful :p, or you could teach them how to do it themselves.

I agree .net takes forever to install, but someone can correct me if i'm wrong, MS .net installers do a lot more than just install the .net runtimes, it also creates a system restore point which by itself takes ages.

Sorta related but Microsft also wastes your time with a fresh Windows 7 Install. Rather than offer you SP1 straight away, they want you to download a **** ton of pre SP1 patches and then offer you SP1. Completely unnecessary! I downloaded the SP1 installer, patched a fresh W7 install, and proceeded to install all post SP1 updates without a problem.

That's funny, seeing as how in November of 2011, I bought Win7 that includes SP1!

That's funny, seeing as how in November of 2011, I bought Win7 that includes SP1!

Companies who have VL agreements or MSDN subscriptions can download Win7 with or without sp1. MS updates tend to break things, so some companies might not do the full sp1 update for whatever reason.

Sorta related but Microsft also wastes your time with a fresh Windows 7 Install. Rather than offer you SP1 straight away, they want you to download a **** ton of pre SP1 patches and then offer you SP1. Completely unnecessary! I downloaded the SP1 installer, patched a fresh W7 install, and proceeded to install all post SP1 updates without a problem. Office 2010? Same **** there too!

Or you could spend some time looking through the updates and figure out which one is for the updating process, write down which one it was, install that one, and then install SP1.

Or, I could just ask Seriously? But then I'd be a dick.

Just put the updates on your USB Key. .net version 4.5 includes all updates from 2.0 to 4.5. .net version 1.1 includes all the ones before. Same for Windows Service Packs. Use the FULL installers, not web installers.

.net framework is actually more BENEFICIAL to admins, because it is supposed to be a collection of all the DLL runtimes ever needed for an application, rather than having to hunt down an obsure DLL or OCX file in the old days that you end up downloading from some dodgy website because you can'tfind it anywhere else.

Just put the updates on your USB Key. .net version 4.5 includes all updates from 2.0 to 4.5. .net version 1.1 includes all the ones before. Same for Windows Service Packs. Use the FULL installers, not web installers.

.net framework is actually more BENEFICIAL to admins, because it is supposed to be a collection of all the DLL runtimes ever needed for an application, rather than having to hunt down an obsure DLL or OCX file in the old days that you end up downloading from some dodgy website because you can'tfind it anywhere else.

4.5 should only update 4.0. 3.5 does 3.0 and 2.0.

MS should roll all .net runtimes into a single installer.

And it should be part of the initial Windows install.

I always forget it download it when I first format.. then when I need an app, time to wait lol..

That being said, as someone who has developed with .Net.. it's great for what it is.. and it's not going anywhere.

First, let me say that I'm not a developer. Whether .Net is a good platform for programming is out of my realm of expertise, nor do I care. As someone who services/maintains multiple PCs at work and on the side, .NET infuruates me. Effing large installers to download, time seems to stop as the POS installs itself and once thats done, you get to download/install patch after patch that all take what is IMO, an unreasonable amount of time to actually install. The fun is then multiplied several times over should you have applications that require different versions of .Net. Microsoft either needs to release a single update rollup for supported versions of .NET or package the installer fully updated. I sincerely hope that .NET dies a firey death sooner rather than later.

Sorta related but Microsft also wastes your time with a fresh Windows 7 Install. Rather than offer you SP1 straight away, they want you to download a **** ton of pre SP1 patches and then offer you SP1. Completely unnecessary! I downloaded the SP1 installer, patched a fresh W7 install, and proceeded to install all post SP1 updates without a problem. Office 2010? Same **** there too!

Eff you Microsoft...just eff you!

[RANT/OFF]

Now learn how to do your job properly ;)

  • Like 2

To the OP who was complaining about the cost of software then why don't you talk to Microsoft about their charity licensing?

http://www.microsoft.com/licensing/licensing-options/for-industries.aspx#tab=4

You said you were a non-profit organisation so why not ring them up and find out whether your eligible?

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Your favorite clickbait gets a clickbait feature? Shame on you!
    • Try asking people. They are using it, even the non tech ones.
    • Report: iPhone Air isn't dead, and a second-generation model is planned for 2027 by Hamid Ganji Image via Apple Since the launch of the iPhone Air, we’ve heard conflicting rumors and speculation about the fate of Apple's ultra-thin iPhone. As it turns out, Apple is not going to ditch the Air model from its lineup, and a second generation is already planned for next year. As reported by Bloomberg’s Mark Gurman, citing people familiar with the matter, the second-generation iPhone Air is planned for spring 2027 and is poised to receive notable upgrades. The upgraded model, codenamed V62, will reportedly feature an additional rear camera for ultrawide photography. The new camera system is said to be in advanced testing within Apple. Gurman also says the second-generation iPhone Air could offer better battery life, either through a larger battery or software improvements. The overall design of the device is expected to remain unchanged. A single rear camera and below-average battery life were among the biggest drawbacks of the first-generation iPhone Air despite its $999 price tag. Hopefully, the next iPhone Air will fare better. Gurman also added that the device will be powered by the A20 Pro processor. The release of the second-generation iPhone Air in spring 2027 aligns with previous reports that Apple is shaking up the iPhone release cycle. Accordingly, the iPhone 18 Pro, iPhone 18 Pro Max, and the company’s first foldable iPhone are expected to launch in September 2026, followed by the iPhone 18 and the new iPhone Air roughly six months later. The 20th-anniversary iPhone is also reportedly planned for fall 2027. Meanwhile, if you’re planning to buy the refreshed iPhone Air, Apple might surprise you with a new price tag. As we reported today, CEO Tim Cook confirmed that price increases are on the way due to rising memory chip costs and a severe shortage. With that in mind, analysts estimate that the base iPhone 18 Pro could cost as much as $1,399 this year. The current $999 iPhone Air may not be immune to those price hikes.
    • I thought you could sign up using alt email?
  • Recent Achievements

    • Week One Done
      Classifyskilleducation earned a badge
      Week One Done
    • One Month Later
      eurospharma62 earned a badge
      One Month Later
    • Week One Done
      With What earned a badge
      Week One Done
    • Week One Done
      Harris Gilbert earned a badge
      Week One Done
    • One Month Later
      Vincian earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      545
    2. 2
      +Edouard
      168
    3. 3
      PsYcHoKiLLa
      80
    4. 4
      ATLien_0
      64
    5. 5
      neufuse
      64
  • Tell a friend

    Love Neowin? Tell a friend!