Recommended Posts

Many users on here using WIFI on their home desktop computer vs Ethernet?

Reason I ask, Most of my WIFI gadgets (Stereo, xbox, boxee, etc) are in the living room. My desktop is in my bedroom. My signal strength in the living room is about 40%

I just bought a wireless bridge ( http://microcenter.com/product/357929/4_Port_Wireless_N__Ethernet_Media_Bridge ), and was thinking of hooking that into my ethernet port on my mb (to become wifi), and move the cable modem/router to the living room.

I assume most users on here try to avoid WIFI on their main desktop pc due to lack of speed vs wired?

Link to comment
https://www.neowin.net/forum/topic/1110453-wifi-on-home-pc/
Share on other sites

what router do you have Brando?

also I recommend NETGEAR wireless products for consumer level and EXTREME NETWORKS for enterprise level.

I recommend you get one that has the USB extension cable and get one that's large, not those compact ones those are weaker and made for looks.

I have one of the "crappier" NETGEAR wireless USB sticks w USB ext. and it works fine for streaming...

It helps to have a repeater setup as well. having those is better then having one powerful router. mesh wireless is even better and lots of hotels and conference centers use those.

Many users on here using WIFI on their home desktop computer vs Ethernet?

Reason I ask, Most of my WIFI gadgets (Stereo, xbox, boxee, etc) are in the living room. My desktop is in my bedroom. My signal strength in the living room is about 40%

I just bought a wireless bridge ( http://microcenter.c...et_Media_Bridge ), and was thinking of hooking that into my ethernet port on my mb (to become wifi), and move the cable modem/router to the living room.

I assume most users on here try to avoid WIFI on their main desktop pc due to lack of speed vs wired?

There are indeed uses for Wi-fi on desktops - especially if you do some of your computing in a room that is impossible or cost-prohibitive to wire.

I have a 42" FP plasma in my bedroom (which, due to the screen developing a black bar down its center, will be replaced at some point) that I sometimes used as an alternate screen (for seriously wide-screen computing, as it also supports HDMI/720p). For 720p, wireless-N is plenty for nonshooter/non-MMO MP (and even MMO MP on small maps) - even low-band N; however, at 1080p and on busier maps and higher loads, wired IS better due to lack of lag.

I use HomePlug wherever possible as I didn't put CAT5e/6 in the walls when I moved in (which in retrospect was a mistake), devices which move around (such as my laptop, tablet and smartphones) are on WiFi.

I find HomePlug much more reliable than WiFi.

I use HomePlug wherever possible as I didn't put CAT5e/6 in the walls when I moved in (which in retrospect was a mistake), devices which move around (such as my laptop, tablet and smartphones) are on WiFi.

I find HomePlug much more reliable than WiFi.

Never heard of homeplug. Ill research it. Can it be bought locally?

There is only 1 use for wifi, that is MOBILE devices. Or devices that just do not have a lan interface, If the device stays in one place - run a wire to that place!!

If your in a building where you can not run cable, you rent for example - then homeplugs would be better than wifi yes.

But if your home - run a wire!! Then put in a switch where you need to connect multiple devices. This is what I have running to my living room where my A/V cabinet it.

Is homeplug a brand or a technology? I noticed best buy sells a Actiontec 500 Mbps Powerline Home Theater Network Adapter Kit. Same thing?

http://www.bestbuy.com/site/Actiontec+-+500+Mbps+Powerline+Home+Theater+Network+Adapter+Kit/5215483.p?id=1218625358741&skuId=5215483&st=homeplug&cp=1&lp=1

powerline adapters is another term, but homeplug is not a brandname

http://en.wikipedia.org/wiki/HomePlug

https://www.homeplug.org/home/

yeah that link you provided to bestbuy is a homeplug/powerline adapter - connect to your router lan on one end, put a switch on the other end if you need multiple ports on the other end.

powerline adapters is another term, but homeplug is not a brandname

http://en.wikipedia.org/wiki/HomePlug

https://www.homeplug.org/home/

yeah that link you provided to bestbuy is a homeplug/powerline adapter - connect to your router lan on one end, put a switch on the other end if you need multiple ports on the other end.

Thanks. Notice most of them are singles. Have 3 devices that would need to plug into it (xbox, av receiver, Dish Hopper). So Ill hunt around.

Wired desks where possible ,wireless for mobile devices . I am using a relatively cheap Rosewill EasyN400 , and havn't had a single glitch in over 2 years with it . I use it for hardware firwall and port forwarding etc. It is a surprisingly fully featured device , and easy to do firmware updates .

I believe they are all going to be singles.. Don't think I have every seen one with built in switch.

You just connect a SWITCH to the powerline adapter if you need more ports.

Let me guess you never heard the term switch either ;)

http://en.wikipedia.org/wiki/Network_switch

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Microsoft finally admits its default Windows 11 25H2, 24H2 action broke key legacy component by Sayan Sen Microsoft last week released Windows 11 KB5094126 and KB5093998 as the latest Patch Tuesday updates. Following that the company also published the accompanying dynamic updates under KB5094149, KB5095971, and KB5094156. So far the company has acknowledged two known issues that have popped up after the release which include bugged-out Office apps as well as the Recycle Bin; though there could be more at play too. Speaking of bugs and issues, Microsoft seems to have finally acknowledged a problem that probably has been around for close to a year. That's because back in July of 2025 the company made a default change to the latest Windows 11 versions, wherein it switched to JScript9Legacy on Windows 11 24H2 and later releases. Hence following the release of version 25H2 in October 2025, JScript9Legacy also remained default-enabled. As a result there has been a compatibility issue ever since then. For those wondering, by switching to JScript9Legacy Microsoft intended to improve the security of modern Windows PCs by reducing vulnerabilities tied to legacy scripting like cross-site scripting (XSS), among others. XSS exploits can allow cyber-attackers to attach malicious code onto legitimate websites and use them to execute the code when a potential victim loads such a website. Hence the new JScript9Legacy engine enforced stricter execution policies and improved object handling, which should help mitigate such attacks. Microsoft today has published a new support article detailing the problem. Neowin spotted it while browsing. The company says that JScript global definitions and execution context may fail to persist across scripts, potentially breaking older dependent apps and web-based components that relied on this legacy behavior. In the article Microsoft has confirmed that the issue stems from its move away from the older jscript9.dll engine in favor of jscript9legacy.dll. As mentioned above, while the newer engine was designed to address vulnerabilities and strengthen security it also changes how JScript handles execution context. As a result functions and definitions loaded by one script could no longer remain available to subsequent scripts once execution ended. The company notes that some applications worked correctly on earlier Windows versions because the older JScript engine automatically retained global definitions and execution state between scripts. Under the newer model though that behavior is disabled by default causing certain legacy workloads and polyfill-dependent scripts to fail. Microsoft says it addressed the problem via the KB5077241 update though the fix had not been enabled automatically in the following updates. As such admins must explicitly turn on persistent JScript execution context using a Registry setting that the tech giant shared today. The configuration can be applied to individual processes or system-wide through the FEATURE_ENABLE_PERSISTENCE registry key. The steps have been outlined below: Run the following command to create the feature control registry key: reg add "HKLM\Software\Policies\Microsoft\Internet Explorer\Main\FeatureControl\FEATURE_ENABLE_PERSISTENCE" Under this key, create a new DWORD (32-bit) value. Configure the value as follows: To enable persistence for specific processes only: Set the value to 1 for each target process name. To enable persistence for all processes: Add * as the key name and set its value to 1. You can find the official support article here on Microsoft's website.
    • The possibility that milk gathers back into a glass implies that gravity can be 'reversed'.
    • VidCoder 12.20 by Razvan Serea  VidCoder is a DVD/Blu-ray ripping and video transcoding application for Windows. It uses HandBrake as its encoding engine. Calling directly into the HandBrake library gives it a more rich UI than the official HandBrake Windows GUI. VidCoder can rip DVDs but does not defeat the CSS encryption found in most commercial DVDs. You’ll need the NET 8 Desktop Runtime. If you don’t have it, VidCoder will prompt you to download and install it. The Portable version is self-contained and does not require any .NET Runtime to be installed. You do not need to install HandBrake for VidCoder to work. Feature list: Multi-threaded MP4, MKV containers Completely integrated encoding pipeline: everything is in one process and no huge intermediate temporary files H.264, H.265, MPEG-4, MPEG-2, VP8, Theora video Hardware-accelerated encoding with AMD VCE, Nvidia NVENC and Intel QuickSync AAC, MP3, Vorbis, AC3, FLAC audio encoding and AAC/AC3/MP3/DTS/DTS-HD passthrough Target bitrate, size or quality for video 2-pass encoding Decomb, detelecine, deinterlace, rotate, reflect, chroma smooth, colorspace filters Powerful batch encoding with simultaneous encodes Customizable Pickers to automatically pick audio and subtitle tracks, destination, titles and more Instant source previews Creates small encoded preview clips Pause, resume encoding VidCoder 12.20 changes: Updated HandBrake core to 1.11.2. Download: VidCoder 12.20 | 47.0 MB (Open Source) Download: Portable VidCoder 12.19 | 89.3 MB Link: VidCoder Home Page | Github | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Too soon, I'm still not over this death!
  • Recent Achievements

    • Week One Done
      Jordan Smith earned a badge
      Week One Done
    • Reacting Well
      BizSAR earned a badge
      Reacting Well
    • First Post
      AndreaB earned a badge
      First Post
    • Week One Done
      Huge Trailer earned a badge
      Week One Done
    • Week One Done
      Classifyskilleducation earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      592
    2. 2
      +Edouard
      185
    3. 3
      PsYcHoKiLLa
      76
    4. 4
      Michael Scrip
      73
    5. 5
      Steven P.
      66
  • Tell a friend

    Love Neowin? Tell a friend!