Recommended Posts

Our ISP allows us to download 250 GB per month.

When we reach the 250 GB monthly cap, our speed gets reduced.

According to this link, it's reduced to "256kb/s"

What speed is "256kb/s" in KB/s?

I am asking, because I thought "256kb/s" would be a quarter of a MB per second (I understand that would be KB/s but is "256kb/s" strictly kBITS/s?), but that is not what we're getting.

Link to comment
https://www.neowin.net/forum/topic/1111415-confused-with-kbs-and-kbs/
Share on other sites

It is marketing at its best. the 256kb/s means nothing to most people, including some people that understand technology. However, 256kb/s sounds better than 32 KB/s.

I thought that "256kb/s" is the same as "256 KB/s" - damn :(

I'm reading that as it'll be reduced to 256 kilobytes per second. It's just whoever typed it, didn't think about the difference between bits and bytes. I could be wrong, but at 256 kilobits per second, your connection would effectively had the rate of dial up, which, in my opinion, would be useless.

Lets translate if you want :)

First:

GB = Gigabyte

gb = Gigabit

KB = Kilobyte

kb = kilobit

1 GB = 8 gb

1 KB = 8 kb

1 GB = 1048576 KB

1 kb = 0.125 KB

Once we got that a bit ( :p ) out the way.....

250 GB = 262144000 KB

256 kb = 31.25 KB

I hope this cleared up some things and did not confuse you more :)

I'm reading that as it'll be reduced to 256 kilobytes per second. It's just whoever typed it, didn't think about the difference between bits and bytes. I could be wrong, but at 256 kilobits per second, your connection would effectively had the rate of dial up, which, in my opinion, would be useless.

hystorically connection speed has been rated in bits.

Dial up was 56Kbits/s and a little more with data compression (or less before 2000) which was far lower than 32KB/s.

I'm reading that as it'll be reduced to 256 kilobytes per second. It's just whoever typed it, didn't think about the difference between bits and bytes. I could be wrong, but at 256 kilobits per second, your connection would effectively had the rate of dial up, which, in my opinion, would be useless.

It is useless.

The person who typed it up DID not make a mistake for two reasons:

1: Thats how low it actually is

2: If they mistyped it, it would be false advertisement and lawsuit.

It is useless.

The person who typed it up DID not make a mistake for two reasons:

1: Thats how low it actually is

2: If they mistyped it, it would be false advertisement and lawsuit.

Anyway 256KB/s is still kinda high. You can download a 720p mkv file in around 5 or 6 hours at this speed. There would be no point to reduce the speed if people could still download HD movies in less than a day.

32KB/s is kinda low tough. 64KB/s would have been more resonable.

I have ran speed tests on various websites. Results are (down/up):

1.23 Mb/s / 0.104 Mb/s

276 kbps / 59 kbps

215.73 Kbps (0.2 Mbps) / 59.98 Kbps (0.1 Mbps)

243 kbps / 36 kbps

So yep, I'm restricted to 32 KB/s for the next week. Ouch.

Who would have thought we pay ?17.50 (not inc. line rental) for this connection :pinch:

Eh, either way, it'd make more sense if they were consistent with it, with Kbps = kilobits per second and KBps being kilobytes per second. On another note though, 250GB a month is a lot of data. I usually hit around 80-90GB a month on my DSL connection, and I download quite a bit of stuff weekly, not to mention Netflix and youtube regularly.

Better than 56Kbps....

My first internet connection was a 9600 text connection. We (me and my friends) had to use a hack and connect to the server using telnet and install a small nix app in our home folder on the server to access the internet connection of the server via our 9600 text connection using telnet. Ah those were the good ol days XD.

The cie never got us doing it rofl

Also note that sometime companies rate 1kbits/s as 1000bits/s while file download softwares will consider 1KB/s to be 1024bytes/s. So 256kbits/s might not be 32KB/s but 31.25KB/s

So you went over your 250GB already for this month? its only the 10th of the Month -- or does your month end on different days?

Im on comcast and they have a 250GB limit as well, and have never even gotten close to it.. Here are last few months of usage

post-14624-0-27947400-1349895404.jpg

I would look into better tracking of your usage, so if you do have some big downloads you want to do time them for near month end so if you do go over your only restricted for a couple of days at most.

So you went over your 250GB already for this month? its only the 10th of the Month -- or does your month end on different days?

Im on comcast and they have a 250GB limit as well, and have never even gotten close to it.. Here are last few months of usage

<image snipped>

I would look into better tracking of your usage, so if you do have some big downloads you want to do time them for near month end so if you do go over your only restricted for a couple of days at most.

We have two family members who use Netflix in two separate rooms, and they watch HD content each. I also review PC games, so have to download 15 GB of ISOs from our company weekly for this purpose alone.

We used 250 GB in 21 days.

To be fair, we have only had the connection for 3 weeks and we only found out last week that we can download as much as we want between 00:00 and 08:00 without it affecting the cap. Since we were never informed of this period (in fact, one person at the ISP said it was "unlimited at all times" and one said we'd only be dropped to 2Mbps and not 0.125Mbps), we are currently going through a complaints procedure with them.

They said "it was all over the website" but we ordered by phone. Just because we can look on the website, doesn't mean people should have to look at the website. Such conditions should be mentioned during the phone order, especially when asked (which we did).

So lets see 15x4 = 60 + Netflix bandwidth

http://support.netfl...de/87#gsc.tab=0

There are 3 settings to choose from:

  • Good quality (uses up to 0.3 GB per hour)
  • Better quality (uses up to 0.7 GB per hour)
  • Best quality (uses up to 1 GB per hour, or up to 2.3 GB per hour if watching HD)

So even at 2.3GB /hour your looking at in 3 weeks minus even your 60GB for the month your looking at what 80 hours of HD video to hit your limit..

Really you watched 80 hours of video in 3 weeks?

That's crazy dude! Might want to look on changing your video settings on netflix ;) Or bringing in another line.. Setup one for netflix only - so your looking at 250/2.3 or 108 hours of video a month. And then the other 250 you can use for internet and your isos you need to download.

I agree with you that they should of atleast mentioned looking at the website for their TOS and bandwidth restrictions. But to be honest it is up to the buyer understands limits, not the other way around. If when you ordered someone stated you had unlimited -- then sure you have a legit complaint.

They said "it was all over the website" but we ordered by phone. Just because we can look on the website, doesn't mean people should have to look at the website. Such conditions should be mentioned during the phone order, especially when asked (which we did).

An ISP saying it is all over the website is like a cable company saying it was all over the commercial. How do you get access to those things before you buy access to them. They can't expect you to get information from a source that requires their service to reach the source.

That's crazy dude! Might want to look on changing your video settings on netflix ;) Or bringing in another line.. Setup one for netflix only - so your looking at 250/2.3 or 108 hours of video a month. And then the other 250 you can use for internet and your isos you need to download.

And maybe get your job to pay for the extra line since it is for their profit.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Microsoft's fast coding model MAI-Code-1-Flash comes to Copilot Business and Enterprise by Karthik Mudaliar Microsoft’s recently announced MAI-Code-1-Flash model is now generally available to GitHub Copilot Business and Copilot Enterprise customers. With this support, organizations can have more centralized policy controls and billing while finally being able to use Microsoft’s lightweight, first-party coding model. According to GitHub’s announcement, Business and Enterprise plan administrators must enable the MAI-Code-1-Flash policy in Copilot settings before developers can access the model. Microsoft says that MAI-Code-1-Flash is for fast, iterative coding work rather than the most demanding architectural or debugging tasks. GitHub’s official model comparison page says that the model is great for "general-purpose coding and writing," while it excels at fast, accurate code completions and explanations Microsoft introduced MAI-Code-1-Flash on June 2 as part of a broader collection of internally developed MAI models. GitHub subsequently expanded support to Copilot CLI, the Copilot cloud agent, GitHub.com chat, GitHub Mobile, Visual Studio, JetBrains IDEs, Eclipse, and Xcode, but said support for managed Business and Enterprise customers was still on the way. In Microsoft’s own benchmark testing, MAI-Code-1-Flash scored 51.2% on SWE-Bench Pro, compared with 35.2% for Anthropic’s Claude Haiku 4.5. Microsoft also claimed that the model used up to 60% fewer tokens on SWE-Bench Verified. Do note that these are vendor-run results rather than independent measurements. The model is billed at provider list pricing under GitHub’s usage-based system. GitHub currently lists MAI-Code-1-Flash at $0.75 per million input tokens, $0.075 per million cached input tokens, and $4.50 per million output tokens. For organizations, the main incentive to use MAI-Code-1-Flash is likely to be efficiency rather than maximum capability. A smaller model that responds quickly and limits unnecessary output is quite useful for repetitive agent tasks at scale, especially after GitHub Copilot’s move toward usage-based billing. The "Flash" model is recommended for fast work and not necessarily for huge repositories with loads of context. It's better if teams compare their output with other larger models, especially if they're working on security-sensitive changes and complex, multi-file work.
    • yes AND no the "original" or plain/normal Optiplex 7010 won't be getting any more new firmware updates BUT the Optiplex SFF/SFF Plus {small form factor}, Micro/Micro Plus & Tower/Tower Plus 7010 editions DO get new updates such as this new one   and here are similar guides from the Dell web site for Dell systems: https://www.dell.com/support/kbdoc/en-us/000390990/secure-boot-transition-faq https://www.dell.com/support/kbdoc/en-us/000347876/microsoft-2011-secure-boot-certificate-expiration
    • AT&T has been spying on US citizens with the NSA for decades.. they just know how to keep it more under wraps.. the evil level is still there.
  • Recent Achievements

    • One Year In
      bernmeister earned a badge
      One Year In
    • Week One Done
      Scoobystu earned a badge
      Week One Done
    • Week One Done
      tuben earned a badge
      Week One Done
    • First Post
      OffsetAbs earned a badge
      First Post
    • Reacting Well
      OffsetAbs earned a badge
      Reacting Well
  • Popular Contributors

    1. 1
      +primortal
      462
    2. 2
      +Edouard
      213
    3. 3
      PsYcHoKiLLa
      158
    4. 4
      Steven P.
      72
    5. 5
      FloatingFatMan
      71
  • Tell a friend

    Love Neowin? Tell a friend!