Upgrading RAID5: Destroy it or leave it as is and upgrade


Recommended Posts

Finally readying to do the upgrade :)

Last question: On controller 1, I have my current RAID5. I have to the drives as physically I have no space to put the new HDDs. Should I go into the controller 1's BIOS and destory it or just leave it as is, remove the drives, put in the new ones plugged into controller 2 and make the new RAID5 on controller 2's BIOS?

Thanks

Since it does not matter, what do you think is the best option you will pick?

There is a reason I asked Neowin :p

Personally, Id leave it alone; In theory if I remove the disks and replug them all in one day, the RAID5 would still work since it isnt missing any members. I just hope it doesnt nag about it.

So should I just remove the drives and thats it? I want to start the initialization of the new RAID5 as it takes time so please ASAP....

You don't have "Fast Initialize" on your controller? I'm doing an upgrade/switcharound today too and I did my initialize in less than 60 seconds :D

I would just plug in the new drives and build a new array since i'm guessing you aren't worried about data.

Also i'm switching away from RAID5 - how many drives are you using? :)

I would just plug in the new drives and build a new array since i'm guessing you aren't worried about data.

Theres the problem: One of the drives of the new RAID5 contains ALL of the data of the old RAID5. I copied it. So I cant "initialize" it because it says it will erase all the data.

I also have another issue now: Since I put in the new RAID5 controller, now I cannot boot off my boot drive (on another controller). Doesnt give me the optioon.

Having said that, this is a issue Ive read so....

You had a old RAID with your stuff on it before so why move it off to a new drive?

Ok so do you have three drives out of four not in use right? If so make a RAID 5 with three then move your data to the RAID 5 and then add the drive to your RAID 5 by expanding the array.

You had a old RAID with your stuff on it before so why move it off to a new drive?

Ok so do you have three drives out of four not in use right? If so make a RAID 5 with three then move your data to the RAID 5 and then add the drive to your RAID 5 by expanding the array.

Lets see as I might have made a mistake or misunderstood you :)

I had a RAID5 (lets say) 200 GB x 4. About 600 GB

I bought 3 TB x 4. About 9 TB

I transfered all of the 600 GB to ONE of the 3 TB

What should I do now? Continue please :) As I didnt understand you correctly, sorry

Make a RAID 5 with the three 3TB drives move date from your one 3TB to the array and expand the array by adding your 3TB to it.

OK :) Now I understood you! :) Thanks for the tip.....

I still have that small boot error Id like to fix before actually doing this

Make a RAID 5 with the three 3TB drives move date from your one 3TB to the array and expand the array by adding your 3TB to it.

I feel stupid asking this but I dont find this option anywhere....The only place is a "Spare Pool" but it doesnt relate it to my RAID5.....

Then it does not have that feature unlike the Intel RAID.

You go and get 4x3TB blank drives

https://www.neowin.net/forum/topic/1110205-just-spent-58798-euros-to-upgrade-my-raid

You then want a RAID card to which I said you be much better off using the Intel RAID.

https://www.neowin.net/forum/topic/1110259-recommend-a-raid5-pci-or-pci-e-card

You have booting problems because your old RAID was boot drive with your OS on another drive

https://www.neowin.net/forum/topic/1113575-installed-raid-controller-cant-boot-off-other-controller/

You go and use one of them 4x3TB blank drives and move your date off your old RAID to it

https://www.neowin.net/forum/topic/1113553-upgrading-raid5-destroy-it-or-leave-it-as-is-and-upgrade/

Your not making things easy with that last thing considering you intended to make a RAID with them 4x3TB blank drives from the start.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Get $50 of aloSIM Mobile Data Traveler eSim credit for just $24.97 by Steven Parker Today's highlighted deal comes via our Apps + Software section of the Neowin Deals store, where you can save 50% off aloSIM Mobile Data Traveler Lifetime eSim Credit: Pay $24.97 for $50. Stay connected affordably in 120+ countries/regions with your own lifetime eSIM! An eSIM is a digital SIM card. It's basically just mobile data. Once it's activated on your device, it can connect you to data networks in other countries – giving you an internet connection with NO roaming charges. With aloSIM, you can load prepaid eSIM data packages onto your phone, tablet, or computer. Your lifetime eSIM never expires, so it's yours forever and there are never any monthly charges. You'll get $50 in eSIM data credit, which is almost always enough to cover all your data roaming needs for a full year. But if you run out of data, you can always top up your lifetime eSIM and stay connected internationally. Pay $24.97 for a lifetime eSIM with $50 in travel data credit Use your eSIM to join data networks in 120+ countries Install your lifetime eSIM on a compatible device to roam on local data networks Your lifetime eSIM never expires, and can be topped up with more data anytime Many data packages cost as little as $4.50 and last 7 days. Depending on the package you choose, the length of time varies. Good to know Length of access: lifetime For NEW customers only Instant digital redemption Once you add your $50 credit to your aloSim account you have up to 12-months to use it — after that your credit will expire When you pay for a data plan you also get a free phone number (via Hushed) for the same duration of your plan that was purchased - IE 7 day eSim plan gives you a free 7-day phone number Purchased coupon must be redeemed and used within 12 months This deal is not stackable (one offer per aloSIM account) A $4.50 data package will last 7 days The data DOES expire, and you WILL NOT have any leftover data for your next trip unless it takes place within the validity period. While the eSIM never expires, the actual data package is only valid for the length of time stated at purchase (i.e. seven days after activation, 30 days after activation, etc.) So if you buy a seven-day package and only use a tiny bit, that package is still going to expire after seven days. Access options: mobile (check compatibility) Max number of device(s): 1 Updates included Here's the deal: This aloSIM Mobile Data Traveler eSim $50 Credit normally costs ... $50, but it can be yours for just $24.97 for a limited time, a saving of $25 (50% off). For specifications, and license info please click the link below. Get this aloSIM Mobile Data Traveler eSim for just $24.97 (was $50) Although priced in U.S. dollars, this deal is available for digital purchase worldwide. Support queries If you have queries or need support for any of the Neowin Deals, please use the contact form here. Neowin Deals are managed and sold by StackCommerce who represent Neowin on an affiliate basis. Why we post these deals We post these because we earn commission on each sale so as not to rely solely on advertising, which many of our readers block. It all helps toward paying staff reporters, servers and hosting costs. So for those that keep moaning and complaining, be thankful we're still online for you to even do that. Other ways to support Neowin Whitelist Neowin by not blocking our ads Create a free member account to see fewer ads Make a donation to support our day to day running costs Subscribe to Neowin - for $14 a year, or $28 a year for an ad-free experience Disclosure: Neowin benefits from revenue of each sale made through our branded deals site powered by StackCommerce.
    • WordArt was cool. We now have color fonts as a substitute although Word only supports COLRv0 and COLRv1 (Fraud OS 11 only). The OpenType SVG color font format needs to be supported by Office. Adobe's apps support it
    • i backup my files, incl keepass to my proton drive using Syncback which i paid for (thanks Warwagon!). they have a free version but i can't remember what it does and doesn't do anymore. anyways, it's really, really simple and easy to use. i also periodically keep backups of my keepass onsite especially when i've changed or added a password that is important to me. if you don't wanna spend time on the syncthing setup, get syncback. haha i even got my dad to use it for his backups to usb and he doesn't even need my help!!! (thank god!)
  • Recent Achievements

    • First Post
      DrWankel earned a badge
      First Post
    • Reacting Well
      DrWankel earned a badge
      Reacting Well
    • Week One Done
      Supreme Spray LV earned a badge
      Week One Done
    • One Month Later
      Genuinetonerink- Dubai earned a badge
      One Month Later
    • Week One Done
      Genuinetonerink- Dubai earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      497
    2. 2
      +Edouard
      158
    3. 3
      PsYcHoKiLLa
      90
    4. 4
      Steven P.
      74
    5. 5
      Michael Scrip
      72
  • Tell a friend

    Love Neowin? Tell a friend!