Upgrading RAID5: Destroy it or leave it as is and upgrade


Recommended Posts

Finally readying to do the upgrade :)

Last question: On controller 1, I have my current RAID5. I have to the drives as physically I have no space to put the new HDDs. Should I go into the controller 1's BIOS and destory it or just leave it as is, remove the drives, put in the new ones plugged into controller 2 and make the new RAID5 on controller 2's BIOS?

Thanks

Since it does not matter, what do you think is the best option you will pick?

There is a reason I asked Neowin :p

Personally, Id leave it alone; In theory if I remove the disks and replug them all in one day, the RAID5 would still work since it isnt missing any members. I just hope it doesnt nag about it.

So should I just remove the drives and thats it? I want to start the initialization of the new RAID5 as it takes time so please ASAP....

You don't have "Fast Initialize" on your controller? I'm doing an upgrade/switcharound today too and I did my initialize in less than 60 seconds :D

I would just plug in the new drives and build a new array since i'm guessing you aren't worried about data.

Also i'm switching away from RAID5 - how many drives are you using? :)

I would just plug in the new drives and build a new array since i'm guessing you aren't worried about data.

Theres the problem: One of the drives of the new RAID5 contains ALL of the data of the old RAID5. I copied it. So I cant "initialize" it because it says it will erase all the data.

I also have another issue now: Since I put in the new RAID5 controller, now I cannot boot off my boot drive (on another controller). Doesnt give me the optioon.

Having said that, this is a issue Ive read so....

You had a old RAID with your stuff on it before so why move it off to a new drive?

Ok so do you have three drives out of four not in use right? If so make a RAID 5 with three then move your data to the RAID 5 and then add the drive to your RAID 5 by expanding the array.

You had a old RAID with your stuff on it before so why move it off to a new drive?

Ok so do you have three drives out of four not in use right? If so make a RAID 5 with three then move your data to the RAID 5 and then add the drive to your RAID 5 by expanding the array.

Lets see as I might have made a mistake or misunderstood you :)

I had a RAID5 (lets say) 200 GB x 4. About 600 GB

I bought 3 TB x 4. About 9 TB

I transfered all of the 600 GB to ONE of the 3 TB

What should I do now? Continue please :) As I didnt understand you correctly, sorry

Make a RAID 5 with the three 3TB drives move date from your one 3TB to the array and expand the array by adding your 3TB to it.

OK :) Now I understood you! :) Thanks for the tip.....

I still have that small boot error Id like to fix before actually doing this

Make a RAID 5 with the three 3TB drives move date from your one 3TB to the array and expand the array by adding your 3TB to it.

I feel stupid asking this but I dont find this option anywhere....The only place is a "Spare Pool" but it doesnt relate it to my RAID5.....

Then it does not have that feature unlike the Intel RAID.

You go and get 4x3TB blank drives

https://www.neowin.net/forum/topic/1110205-just-spent-58798-euros-to-upgrade-my-raid

You then want a RAID card to which I said you be much better off using the Intel RAID.

https://www.neowin.net/forum/topic/1110259-recommend-a-raid5-pci-or-pci-e-card

You have booting problems because your old RAID was boot drive with your OS on another drive

https://www.neowin.net/forum/topic/1113575-installed-raid-controller-cant-boot-off-other-controller/

You go and use one of them 4x3TB blank drives and move your date off your old RAID to it

https://www.neowin.net/forum/topic/1113553-upgrading-raid5-destroy-it-or-leave-it-as-is-and-upgrade/

Your not making things easy with that last thing considering you intended to make a RAID with them 4x3TB blank drives from the start.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • You can't, if you didn't notice, it doesn't support surround at all, it's right in the spec list.
    • Hi — I’m always interested in soundcards. Like displays, I just want to know I’m getting as much clean “sonic juice” into my brain as possible as the years take their toll. I’m not entirely sure what to take away from this review, though. It doesn’t really tell me whether the AE‑X is a good product or who it’s actually for. Most of what I’m getting is: there’s a driver to install, here’s what it looks like, and here’s what’s in the box. There’s a lot of emphasis on the SPDIF input. When you mention not needing to switch headphones between console and PC — does that mean the PC has to be powered on just to pass audio through? That seems like a fairly big waste of energy. Is this more something a streamer would use alongside a capture card? How are you testing the sound? (Also, you might want to clarify that you’re using the headphones in wired mode when you mention they’re wireless.) You mention the lack of EMI shielding — how much real‑world difference does that make compared with typical motherboard audio? On multi‑channel: what exactly isn’t supported? Does this mean Windows spatial audio (Dolby Atmos for Headphones, DTS Headphone:X, etc.) won’t work, or just that the card itself doesn’t decode surround formats? And are there any true multi‑driver “surround” headphones left that would even use that? You also highlight support for high‑impedance headphones — but what does that translate to in practice? How does it compare to driving the same headphones from a normal device, and does it make any difference for everyday, lower‑impedance models? In short, who is this card actually targeted at?
    • Yes, THIS is wordart, not the styling that can now be done. Wordart was all about those curvy words, that you could change the path of, like making words go around a circle. I don't think it can be done now, right?
    • Just saw a news report of a Waymo driving into a flooded road.
    • Password Safe 3.72.0 by Razvan Serea Password Safe is a password database utility. Like many other such products, commercial and otherwise, it stores your passwords in an encrypted file, allowing you to remember only one password (the "safe combination"), instead of all the username/password combinations that you use. Once stored, your user names and passwords are just a few clicks away. Using Password Safe you can organize your passwords using your own customizable references—for example, by user ID, category, web site, or location. You can choose to store all your passwords in a single encrypted master password list (an encrypted password database), or use multiple databases to further organize your passwords (work and home, for example). And with its intuitive interface you will be up and running in minutes. PasswordSafe was originally designed by the renowned security technologist Bruce Schneier and released as a free utility application. Password Safe 3.72.0 changelog: Fixed bugs Improved font scale handling - should resolve font size issues on high resolution displays. GH1749 In the Master Password Setup window, "Show Master Password" is no longer truncated on some displays. GH1092, SF1595 Size and position of main window is now correctly restored on scaled displays. SF1630 Keep password expiry date when both password and password expiry are changed; don't clear a non-recurring expiry when the password's changed. SF1628 Custom values can now be copied to the clipboard in read-only mode via Ctrl-C and right-click->Copy Value. New features GH1196 Dark display mode support: Password Safe now supports the system display mode, as well as setting the mode directly via Manage->Options->Display->Display Mode. This change also updates the general "look & feel" of the app to the current Windows theme. Known limitations: The Date picker and keyboard shortcut controls do not switch to dark theme The Customize Toolbar dialog does not switch to dark theme Custom Field support has been added to the more advanced features: Filters XML and Text import and export Comparison, Sync and Merge databases SF938 Custom field values may now be selected by name and copied via a "Copy Custom Field Value..." submenu in the entry context popup menu. SF936 Notes and Custom fields layout now overlap, selectable by tabs, resulting in a more compact and less cluttered layout. SF935 Autotype: Specifying '\v{name}' in the autotype text will cause the corresponding value to be autotyped. Download: PasswordSafe 64-bit | Portable 64-bit | ~20.0 MB (Open Source) Download: PasswordSafe 32-bit | Portable 32-bit View: PasswordSafe Website | Quickstart Guide | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • Dedicated
      Almohandis earned a badge
      Dedicated
    • Dedicated
      JuvenileDelinquent earned a badge
      Dedicated
    • First Post
      DrWankel earned a badge
      First Post
    • Reacting Well
      DrWankel earned a badge
      Reacting Well
    • Week One Done
      Supreme Spray LV earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      503
    2. 2
      +Edouard
      170
    3. 3
      PsYcHoKiLLa
      88
    4. 4
      Steven P.
      75
    5. 5
      Michael Scrip
      74
  • Tell a friend

    Love Neowin? Tell a friend!