+Audioboxer Subscriber² Posted October 30, 2012 Subscriber² Share Posted October 30, 2012 Just a friendly topic to say I finally cracked open my PS3 Slim tonight, cleaned out the dust, and then put new paste on my heatsinks. I have to say the default application from Sony in the factory is weak - I redone mine with IC Diamond 7. Seems to be running a little quieter, but that will probably be mostly to do with dust clean out. Wasn't a hard job at all, simply a little time consuming to take it at a slow pace. Link to comment Share on other sites More sharing options...
Tha Bloo Monkee Posted October 30, 2012 Share Posted October 30, 2012 yeah it's really simple. how old is your slim? it takes a few years for that stuff to dry up. Link to comment Share on other sites More sharing options...
+Audioboxer Subscriber² Posted October 30, 2012 Author Subscriber² Share Posted October 30, 2012 yeah it's really simple. how old is your slim? it takes a few years for that stuff to dry up. About 2 years (maybe 2.5-3 years actually?). It wasn't half dried up, crumbling and looked like a pretty uneven application to start with. edit: The PS3 Slim was bought about 2 months after the US launch, whenever that was - It's a US console imported to UK. Link to comment Share on other sites More sharing options...
torrentthief Posted October 30, 2012 Share Posted October 30, 2012 compressed air is great for cleaning dust out of consoles. Link to comment Share on other sites More sharing options...
Tha Bloo Monkee Posted October 30, 2012 Share Posted October 30, 2012 did you have a security T8 torx handy or did you just use a small flat screwdriver to get it open? Link to comment Share on other sites More sharing options...
a.mcdear Posted October 30, 2012 Share Posted October 30, 2012 Just blowing it out with 125psi from a shop compressor usually does the trick for me... Link to comment Share on other sites More sharing options...
+Audioboxer Subscriber² Posted October 30, 2012 Author Subscriber² Share Posted October 30, 2012 did you have a security T8 torx handy or did you just use a small flat screwdriver to get it open? Normal flat head unscrewed them fine! Link to comment Share on other sites More sharing options...
Fish Posted October 30, 2012 Share Posted October 30, 2012 I've noticed recently my slim has started to make a slightly different noise from the fan, which I'm sure is dust build-up causing a slight imbalance. Been meaning to give at a clean, might crack it open this weekend. Any idea what size the fan is? I might consider replacing it entirely for a quieter PC fan if it's not too incompatible. Link to comment Share on other sites More sharing options...
Fish Posted October 30, 2012 Share Posted October 30, 2012 Nice video here of the entire process http://www.youtube.com/watch?v=dgCI8myCnLI&feature=colike Link to comment Share on other sites More sharing options...
blade1269 Posted October 31, 2012 Share Posted October 31, 2012 Nice video here of the entire process http://www.youtube.com/watch?v=dgCI8myCnLI&feature=colike Can you link to YouTube that is iPhone friendly ? Please ..if you do you instantly win 100 internets ... Link to comment Share on other sites More sharing options...
+Audioboxer Subscriber² Posted October 31, 2012 Author Subscriber² Share Posted October 31, 2012 I personally used this video for cleaning dust AND thermal paste - Also has same guide for fat PS3 - Link to comment Share on other sites More sharing options...
compl3x Posted November 9, 2012 Share Posted November 9, 2012 Normal flat head unscrewed them fine! Yep. I used a 2.0mm flathead and they came out. Link to comment Share on other sites More sharing options...
DirtyLarry Veteran Posted November 9, 2012 Veteran Share Posted November 9, 2012 Hmmm, after reading this thread, think I might just clean my PS3's just to clean them. However the other part of me is thinking just leave well enough alone, as they both seem fine. I do also usually blow compressed air on them at least once a month, if not more frequently. Link to comment Share on other sites More sharing options...
compl3x Posted November 10, 2012 Share Posted November 10, 2012 I've had my PS3 for a long time, 3 years perhaps, and there was very little dust in mine. It was a bit of fun to take it apart and have a look around inside, but it was entirely unnecessary for the amount of dust I removed. My fan also looked as if it was brand new. I must take better care of my electronics than I thought I did :laugh: Link to comment Share on other sites More sharing options...
Boxster17 Posted November 14, 2012 Share Posted November 14, 2012 I have a near launch PS3 (roughly March '07) and the first time I had cleaned it out was maybe a year ago and it was surprisingly clean in there. There's a decent amount of spacing between the fins on the heatsink that it doesn't clog with dust really at all. If you used compressed air that will clean it out just fine, and going any further would likely not be worth the time/effort. I also keep my apartment a lot cleaner than most, if not everyone I know, so maybe that plays some sort of role as well. I had taken mine apart because the fan was starting to ramp up quicker than it used to, so figured that I'd give it a good cleaning as it had been a while. Turns out it wasn't really dirty at all inside but the thermal paste was pretty dried up (and I ended up sanding down the heatsink further as it wasn't as flat as I would've liked, but that's me being a bit OCD). Definitely noticed a difference afterwards but I'm quite sure it's because of the better thermal contact with the CPU/GPU as the previous paste was kind of crappy. Link to comment Share on other sites More sharing options...
DPyro Posted December 7, 2012 Share Posted December 7, 2012 I've read there's no real point replacing the heatsink paste because the chips don't even touch the heat plate. Sure cleaning the dust out is fine but unless you pull the heat plate off the processor and GPU (which is really dangerous) there's no benefit to replacing the paste cause there is even more paste underneath the heat plate. Link to comment Share on other sites More sharing options...
Recommended Posts