NEED THE INTERNET'S HELP - Event Viewer Problem Win 8 vs. Win 7


Recommended Posts

Called Microsoft Tech Support, as I've had around 100 'Warnings' a day in the event viewer about Source: Disk, Description: The IO operation at logical block address 8ea3e8 for Disk 1 was retried. (the bolded area changes every time.)

EDIT : THERE IS NO FREEZING OF MY SYSTEM. SMART, and Intel's Disk Diagnostic, and sfc /scannow all come back 100% "fine", with no errors, etc.

EDIT: The disk is an Intel 330 SSD. It's runing in AHCI mode, and under Win 7 had NO issues of this sort. (I check my logs religiously ... ie on Sundays, after church.)

Part of phone conversation:

MS: This is normal.

Me: This didn't show up/happen in Windows 7.

MS: Oh, that's because logging in Windows 8 is different.

So my request for the NW community is thus:

EVERYONE please, check your EVENT VIEWER > Windows Logs > System.

Click the "Source" header to sort ... or use a FILTER and beside "by source" select disk (with a lowercase d).

Post back here a few things.

1: Windows Version

2: Hard Drive (Type (SSD/HDD), Manufacture (Intel, WD, Seagate, etc)

3: Did you see the error "The IO operation at logical block address [RANDOM ADDRESS] for Disk 1 was retried."

Thank you in advance, for your help.

2cmuhba.jpg

I do not have any disk events since I upgraded to Windows 8. The last one I have is dated 9/20/2012 and it's for a USB thumb drive.

What type of drive is that disk, and have you scanned it to make sure there's nothing wrong with it?

Read his post carefully. While you may not be getting the freezes, the post does address tye specific error you mentioned.

I would at least try it.

Tried it, and am still receiving the error. :s

So just to check. In Disk Management, what drive shows up as disk 1?

Disk 0: Seagate Momentus XT 500GB

Disk 1: Intel 330 Series SSD 120GB

Disk 2: (External) Seagate GoFlex Desk 2TB

Hmm. I checked mine and I do see an entry like that once. It looks like in my case it was for a thumb drive though.

Looking again at your log that is a ton of them. Have you done a long test on the HD already, or just a short one?

Hmm. I checked mine and I do see an entry like that once. It looks like in my case it was for a thumb drive though.

Looking again at your log that is a ton of them. Have you done a long test on the HD already, or just a short one?

Intel Toolbox Quick Diagnostic & Long Diagnostic, SMART Check, sfc /scannow, and I turned off the laptop, did a headstand, holding the SSD chanting something someone in Africa said would stop the problem ... no change, except my head hurts now. ;)

Intel Toolbox Quick Diagnostic & Long Diagnostic, SMART Check, sfc /scannow, and I turned off the laptop, did a headstand, holding the SSD chanting something someone in Africa said would stop the problem ... no change, except my head hurts now. ;)

LOL

Interesting link. I did notice a load of storahci events when attempting to connect a SSD via a toaster dock to my computer. (Actually for that matter, it occurs each time I connect a mechanical drive via the toaster, but only occurs once. For the SSD it was frequent and made the drive unusable.)

My thoughs are thus:

Using Disk Manager, I'm going to shrink drive 0 (Momentus XT), and move files from "D" to the partitioned area.

Move windows to the XT drive, and see if I have problems. If not, then I'll just sell the Intel 330 and say "meh" to SSD's for now.

My thoughs are thus:

Using Disk Manager, I'm going to shrink drive 0 (Momentus XT), and move files from "D" to the partitioned area.

Move windows to the XT drive, and see if I have problems. If not, then I'll just sell the Intel 330 and say "meh" to SSD's for now.

Just to clarify what I was saying earlier. The system drive in my desktop is an Intel SSD. I don't think the fact that it is an SSD is necessarily a problem.

it could be a driver, controller, port, or cable issue as well.

Just to clarify what I was saying earlier. The system drive in my desktop is an Intel SSD. I don't think the fact that it is an SSD is necessarily a problem.

it could be a driver, controller, port, or cable issue as well.

I used to have Win 7 on this drive, and in the same spot, and it had no problems.

I don't know ... I'll just keep poking away at things, I guess.

I REALLY wish Asus would release Win 8 drivers for it's systems (i.e. my laptop is the G53SW-A1).

  • 1 month later...
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Lol I had one of these turn faulty in Jan, guess it wasn't just bad luck lol
    • I'm team Rossmann all the way. I have the exact same NVME, altough not in an array like him.
    • It had gone weeks ago. Although thinking about it I'm on the beta.
    • They thought value of their goods would forever only drop like it used to and didn't account for sudden increase in price because of all the Ai hype. Tough luck Samsung, don't try to weasel this one out. Also American customer protection laws are a**. In Europe, you need to be compensated for a functioning product of same or better characteristics (not same price point as when it was originally bought!) if it can't be repaired and when you receive a replacement product your warranty starts from scratch because you received a different item than you previously had and old warranty thus cannot apply to it anymore. If your actual item was successfully repaired, warranty gets extended for the period the item was in service. If item is repaired to a significant extent, warranty also starts over from scratch because major part of it was replaced. Americans need to fight to get this kind of consumer protections because they are constantly getting screwed over.
    • Microsoft releases new Windows 11 Media Creation Tool with the latest updates by Taras Buria Patch Tuesday updates arrive every month, bringing users new features and security updates. To make sure customers have access to the most recent images, Microsoft also releases updates to the Media Creation Tool app, its official utility for Windows 11 installation. Today, the company pushed new ISOs to Media Creation Tool, allowing you to create images with the June 2026 Patch Tuesday updates. With the latest update, the Media Creation Tool now downloads KB5094126. It is Windows 11 version 25H2, build 26200.8655, which is also available via Windows Update. Note that the app itself remains on the previous version, which you can check in Properties > Details. The only change is that it now downloads a more recent Windows 11 build, so the only way to check is to download an ISO. The June 2026 Patch Tuesday update is a special release for Windows 11, as it brings a new performance profile to make the operating system more responsive and snappier when rendering various user interface surfaces, including the Start menu, quick settings, and more. It does so by spiking processor speeds for a brief moment, resulting in higher loads for a second or two. The so-called “Low latency profile” is rolling out gradually, but you can force-enable it with the ViVeTool app. Other changes include webcam improvements, Task Manager updates, shared audio support, and more. You can download the Media Creation Tool app from the official Microsoft website using this link. Besides MCT, Microsoft lets you download Windows 11 ISO as a file directly from the official Windows 11 website. However, you will need a third-party app to write it to your USB drive. Check out this guide if you want to know how to do that.
  • Recent Achievements

    • Week One Done
      davidbazooked earned a badge
      Week One Done
    • One Month Later
      Jamswaz earned a badge
      One Month Later
    • Week One Done
      Jamswaz earned a badge
      Week One Done
    • Rookie
      Marzoid went up a rank
      Rookie
    • Community Regular
      coch went up a rank
      Community Regular
  • Popular Contributors

    1. 1
      +primortal
      511
    2. 2
      PsYcHoKiLLa
      184
    3. 3
      +Edouard
      159
    4. 4
      Steven P.
      83
    5. 5
      ATLien_0
      75
  • Tell a friend

    Love Neowin? Tell a friend!