Recommended Posts

Earlier today my PSU (Rosewill 630watt) appears to have died. it's 2.x years old as i got it sometime early 2010.

my CPU/Motherboard/RAM (ASUS P8H61-M LX Plus MOBO/i3-2120 CPU) i got May 2012 and everything has been stable so far until today when the PC turned off mid-day and the PC would not turn back on.

so is it safe to assume my PSU is dead?

p.s. i never had good luck with PSU's as in this same PC i have replaced the PSU once already and this will be the 2nd time (first PSU lasted from March 2006 til early 2010). but i am planning on getting a 'Seasonic 520w' which has a 5 year warranty for $75 out the door which is here... http://www.newegg.co...N82E16817151093

Link to comment
https://www.neowin.net/forum/topic/1116445-dead-psu/
Share on other sites

well there is no power light on the motherboard right now and it's plugged in.

only thing i have to test the PSU on is a motherboard sitting on my floor which is the old one i had replaced May 2012 with the current board. but that board (ASUS A8N32-Sli Deluxe) still works fine.

is there a way i can just plug in the power to the board etc just to see if it starts up WITHout installing it into a case since that would be a big pain to do right now since i would have to remove my current mobo?

Link to comment
https://www.neowin.net/forum/topic/1116445-dead-psu/#findComment-595289941
Share on other sites

Try jump starting the PSU: http://forum.overclo...hread.php?t=394

i just tried that and it appears to be dead.

just to make sure i did it correctly i had it unplugged and then had it (the paper clip(steel one obviously ;)) touching the green/black prongs and then plugged it in and nothing. then i even flipped the power switch a couple of times while the wire was there and nothing. then just to make sure i even had the power switch one way and then tried to do the paper clip as it was in one position and nothing and then removed the paper clip and tried the other position on the on/off switch on PSU and still nothing. so that should have covered pretty much everything you can try with that paper clip according to that article.

so it's pretty safe to assume the PSU is dead now?

and by the way... thanks for your time and everyone else.

p.s. i placed the order for that SeaSonic above in my initial post as hopefully getting a PSU with a 5 year warranty will finally give me a PSU that lasts but i have a feeling with my luck that eventually ill be making a claim on that warranty, lol. but supposedly the capacitors are of higher quality on those higher warranty PSU's?

Link to comment
https://www.neowin.net/forum/topic/1116445-dead-psu/#findComment-595291073
Share on other sites

If it doesn't jumpstart using the paper clip method, it's more than likely dead, although off I were you, I would still try a spare psu on the newer board just to make sure there's nothing wrong with the system, that is, if you have a spare one to test with. Sounds like it's history to me though. (The psu, that is) (Y)

Whoops...*IF I were you...auto correct got me, lol

Link to comment
https://www.neowin.net/forum/topic/1116445-dead-psu/#findComment-595291083
Share on other sites

If it doesn't jumpstart using the paper clip method, it's more than likely dead, although off I were you, I would still try a spare psu on the newer board just to make sure there's nothing wrong with the system, that is, if you have a spare one to test with. Sounds like it's history to me though. (The psu, that is) (Y)

Whoops...*IF I were you...auto correct got me, lol

Yeah, thats the best option is to test with another PSU but i don't have any other one to try otherwise i definitely would just to make sure the system is stable etc.

technically i got another PSU but... it's powering a old Athlon 1.2ghz (the PC i am using to type this) which obviously won't work with newer style boards.

but anyways... is it uncommon for a PSU to fry the board (and other components) when they fail? (i have had 3 PSU's die and, so far, none harmed my motherboard or any other components)

Rosewill is about the cheapest you can get, n_k.

Yeah, it was cheap at the time as i needed something cheap but provide decent stable power and that was basically my best option back then.

but since it only lasted 2 years and some odd months it just goes to show it's pretty low quality in terms of it's longevity and this new one (SeaSonic 520watt) should be much better due to 5 year warranty.

p.s. i do leave my PC running 24/7 though.

Link to comment
https://www.neowin.net/forum/topic/1116445-dead-psu/#findComment-595291141
Share on other sites

yes, it's pretty uncommon, but you know, just to be sure and all never hurt anything....but I'm 99% positive that just the PSU was affected, by the sound of it. (Y)

Link to comment
https://www.neowin.net/forum/topic/1116445-dead-psu/#findComment-595291173
Share on other sites

Well i just got the PSU (Seasonic 520watt) in today and i just finished installing it not long ago and so far so good as everything starts right up and so far everything seems stable as ill probably run a Prime95 test and FurMark test on it for CPU/GPU stability etc.

but anyways... thanks for everyone's time. i appreciate it ;)

Link to comment
https://www.neowin.net/forum/topic/1116445-dead-psu/#findComment-595301763
Share on other sites

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Linux 7.1 arrives with an NTFS overhaul and major hardware performance boosts by Paul Hill The founder of the Linux kernel has just announced the availability of Linux 7.1. This is a stable version of the kernel that will now be tested by various Linux distributions before it is shipped to users through update managers. Some users, like those on Debian, for example, might not get it for a long time, if at all, while Fedora users can expect it in the near future. With Linux 7.1 out on time, the merge window for Linux 7.2 is now open, giving contributors the opportunity to send in major new features that have been waiting for the last two months. Torvalds warned that he is currently travelling and will be in another timezone, so timing for the merge window may be irregular due to timezone differences and limited internet access. Torvalds said that he has already fetched early pull requests to allow him to do some offline work, but the travel could still cause disruption. Right now, he is not planning to extend the release, but did consider it. He said he might later regret not extending, though. In terms of this last week of development for Linux 7.1, Torvalds said there were no major or alarming changes. This week consisted mostly of smaller driver updates to GPU, networking, and sound, networking fixes, trace tooling fixes, and misc minor fixes. The shortlog this week lists fixes for driver bugs, memory leaks, I/O and USB fixes, networking and RDMA fixes, DRM/graphics fixes, and tooling and verification improvements. Specific fixes include USB series heap-overflow and buffer overflow fixes, and multiple use-after-free, memory-leak, and refcount corrections across subsystems such as i2c, zram, gpio, and net. There are fixes for graphics drivers, including amdgpu, i915, and virtio, as well as hypervisor and virtualization tweaks affecting mshv, vmbus, and hyperv. According to Phoronix, anyone running Linux 7.1 should look out for the new NTFS driver, Intel FRED for improved performance on Panther Lake and future CPUs, faster graphics with Intel Arc Battlemage, and improvements for older AMD Radeon GPUs. If you are running Linux on your computer and everything is fine, then you don’t need to worry about updating to Linux 7.1 as a priority; just wait for it to be pushed to you. If you have tried Linux on hardware but it didn’t work properly, trying again with a distro that uses Linux 7.1 could cause Linux to work on your machine, thanks to the new hardware support.
    • you can also do this with this tool: PowerSettingsExplorer made by mbk1969 at 3dguru forum.. I found it by accident researching on modern standby and annoying quirks of it in 2022
    • AB Download Manager 1.9.1 by Razvan Serea AB Download Manager is an open-source, feature-rich download manager designed to accelerate downloads, organize files efficiently, and provide seamless control over downloads. With support for multiple connections, resume capability, and an intuitive interface, it enhances the downloading experience for users seeking speed and reliability. The software integrates with various browsers, enabling quick link grabbing and batch downloading. It supports HTTP, HTTPS, and FTP protocols, ensuring broad compatibility with different file sources. Users can schedule downloads, set speed limits, and categorize files automatically for better organization. AB Download Manager is lightweight yet powerful, making it a great alternative to proprietary download managers. Its open-source nature allows developers to contribute, customize, and improve the software as needed. Whether you're downloading large files, managing multiple downloads at once, or seeking an ad-free experience, this tool offers a practical and efficient solution. Key features of AB Download Manager: Multi-Connection Support – Accelerates downloads by splitting files into multiple segments. Resume Capability – Allows paused or interrupted downloads to be resumed without starting over. Batch Downloading – Supports downloading multiple files at once for improved efficiency. Browser Integration – Captures download links directly from browsers for seamless operation. HTTP, HTTPS, and FTP Support – Ensures compatibility with a wide range of file sources. Download Scheduling – Enables users to automate downloads at specific times. Speed Limiting – Lets users control bandwidth usage for optimized performance. File Categorization – Automatically organizes downloaded files into designated folders. User-Friendly Interface – Simple and intuitive design for easy navigation. Cross-Platform Compatibility – Works on multiple operating systems. Ad-Free Experience – No intrusive ads or tracking for a clean user experience. AB Download Manager 1.9.1 changelog: Added An option to customize notification sounds (#1259) Fixed Ongoing notification was laggy on Samsung One UI devices (#1269) Improved Updated Translations Minor UI/UX improvements Download: AB Download Manager 1.9.1 | Portable | ~80.0 MB (Open Source) Download: ARM64 | Portable ARM64 | Android Links: AB Download Manager Website | Github Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • watching him because of the Mr Klinton cat
    • yup dude, ADS on this website are terrible
  • Recent Achievements

    • Week One Done
      rolfus earned a badge
      Week One Done
    • One Month Later
      Leroy Jethro Gibbs earned a badge
      One Month Later
    • Conversation Starter
      flexorcist earned a badge
      Conversation Starter
    • One Month Later
      AndreaB earned a badge
      One Month Later
    • One Month Later
      agatameier earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      506
    2. 2
      +Edouard
      196
    3. 3
      PsYcHoKiLLa
      140
    4. 4
      ATLien_0
      90
    5. 5
      Steven P.
      81
  • Tell a friend

    Love Neowin? Tell a friend!