OCZ Agility 3 - Buy or Avoid?


Recommended Posts

I've been looking into getting an SSD for a while, now someone I know's offered me a 120GB OCZ Agility 3 for around ?50, so obviously I'm tempted. Is it a good buy though? I've read a few SSD guides online before, and the summary of them was to stick to either the Crucial M4 or the Samsung 830. Would it be best for me to keep waiting and go with either of those instead?

The other concern I have with buying an SSD is cloning my drive over to it. My current system HDD is 1TB, so obviously, I'd have to create a second partition on it, and then go back-and-forth moving files over and decreasing the main partition size until it's small enough to fit on the SSD, but would it be safe if I cloned my system to an SSD? My friend recommended doing a fresh install onto the SSD, but I don't really fancy going through all the hassle of setting everything up and installing everything again unless it's absolutely necessary. Also, I recently did the upgrade from Windows 7 Ultimate to Windows 8 Pro (x64), so I'm not sure if I'd be able to use my serial key again if I had to.

Sorry for all the questions, but thanks in advance to anyone who can answer them.

Link to comment
https://www.neowin.net/forum/topic/1117563-ocz-agility-3-buy-or-avoid/
Share on other sites

I own one, and despite what the OCZ haters say it's been a very reliable drive so far. Granted it doesn't have the raw performance of the Vertex 4 or Samsung 8 series but it's still a very good drive for the price. I wouldn't clone from a mechanical drive to an SSD however I would personally advise doing a fresh install as Windows has to configure itself for optimal running on an SSD and I believe it does that upon install.

  • Like 2

More than likely it will be fine, but it is risky since it runs on SandForce. Honestly, you might as well play it safe and buy a brand new Agility 4 or Vertex 4. I don't think it will be too big of a price difference and then you'll get a warranty with it.

Avoid anything OCZ. They just laid of a bunch of people and are going down probably soon. I have a Vertex 3 and it's good---faster than an HDD, and I'm happy with it, but it could be better. Get the Samsung 830. Don't clone the drive!!! Do a fresh install!!!

  • Like 2

Avoid anything OCZ. They just laid of a bunch of people and are going down probably soon.

OCZ isn't going anywhere. Restructuring is a good thing when the market is down. The Vertex is their prized product and is arguably the best SSD on the market, so you can only expect it to get better since they will be focusing more on it.

If you goto OCZ warranty site, there's option asking if this is your "1st RMA, 2nd RMA, 3rd RMA".

I'm on my 2nd RMA after one died after 3 months and another one dead on arrival.

But Agility and Vertex is their flagship line so it has better chance of working well. But the long term reliability, I'm not willing to risk.

In the meantime, I bought a Kingston Hyper X and it was rated 7.2/7.9 on the windows scale. It is working super good right now.

Definitely avoid OCZ - I have personally had a failure 4 months after I purchased my Vertex, and a few other of my friends had their Vertex2/3's fail. For a company that just switched to making just SSD's, they sure suck at it. They also move the largest amount of drives because they're cheap pieces of ****. I would stick with Samsung 830, or Crucial M4 or Intel SSD's.

One other point to note: The Agility 3 doesn't come with a mounting bracket for a 3.5 inch drive slot so you may need to acquire one separately ;)

If you have to ask the question you probably want to avoid them.

I disagree, this thread on it's own seems to show how polarised people are, often it depends on whose opinions you ask. And I find the best opinions come from people to have used the products.

I have a 240GB Agility 3 in my MacBook Pro (dual booting Windows 7 on it too), and it's been very reliable so far. It's faster than anything I've ever owned, so I wouldn't know how much faster other drives would be (or if it's even a noticeable difference), but I believe the newest firmware fixed any reliability issues it may have had.

I have a 240GB Agility 3 in my MacBook Pro (dual booting Windows 7 on it too), and it's been very reliable so far. It's faster than anything I've ever owned, so I wouldn't know how much faster other drives would be (or if it's even a noticeable difference), but I believe the newest firmware fixed any reliability issues it may have had.

This. As long as you have the latest firmware on the 3 Series, you'll be fine. If you get the 4 Series, you won't have to worry about anything since it uses Indilinx, which is super reliable. Plus a 5 year warranty.

Obviously this all depends on who you talk to. I've build about 50 PCs for a client, many of which with an OCZ SSD. Haven't had a single failure yet with those. I've seen one failure, and it was a Kingston, but I wouldn't say Kingston is less reliable than anything else.

I disagree, this thread on it's own seems to show how polarised people are, often it depends on whose opinions you ask. And I find the best opinions come from people to have used the products.

Every product has failures - that's unavoidable. But, OCZ just has high failure rates, and that should be enough as a consumer to sway you away. Why gamble with a product like an SSD? You're storing information, and it's an inconvenience if it fails. In either case, backup your data regardless of the brand. OCZ's tend to be slightly cheaper than the competition, but I would buy Intel, Crucial, Samsung for a few $ more. Having used an OCZ drive, and seeing it fail (amongst my friends') does not put a good reputation of them in my mind.

But, OCZ just has high failure rates, and that should be enough as a consumer to sway you away. Why gamble with a product like an SSD?

Do you have more than anecdotal proof of this? OCZ has been selling cheap SSDs for a long time, I would expect there to be a fair number of failures. But is it really greater than other drive companies by volume sold? It's hard to say.

Unless someone can point to an actual manufacturing flaw, like the IBM Deathstars, it's hard to say they're actually worse.

Every product has failures - that's unavoidable. But, OCZ just has high failure rates, and that should be enough as a consumer to sway you away. Why gamble with a product like an SSD? You're storing information, and it's an inconvenience if it fails. In either case, backup your data regardless of the brand. OCZ's tend to be slightly cheaper than the competition, but I would buy Intel, Crucial, Samsung for a few $ more. Having used an OCZ drive, and seeing it fail (amongst my friends') does not put a good reputation of them in my mind.

I only use my SSD as a boot drive, all my integral data is stored on mechanical drives so I'm covered on that front, but I've simply not seen anything that tells me using an OCZ drive is a risk. The firmware issues that caused the failures have been fixed as articuno1au pointed out, I know signs of disk failures, I update my firmware for products as soon as it's released and I'm careful. I've never seen evidence that owning an OCZ drive is a bigger risk than any other, you'll always get the odd failure, it's just part of the risk of comupting.

I have yet to have an issue with any of the four OCZ drives I have. My Vertex 2 is two years old, Vertex 3 just over a year and two Vertex 4s are a few months old.

OCZ has the highest failure rates, but its negligible (last time I checked they were within half a percent from Intel). The failure rates of mechanical drives are astronomical in comparison.

Every product has failures - that's unavoidable. But, OCZ just has high failure rates, and that should be enough as a consumer to sway you away. Why gamble with a product like an SSD? You're storing information, and it's an inconvenience if it fails. In either case, backup your data regardless of the brand. OCZ's tend to be slightly cheaper than the competition, but I would buy Intel, Crucial, Samsung for a few $ more. Having used an OCZ drive, and seeing it fail (amongst my friends') does not put a good reputation of them in my mind.

As I like to say... If you didn't have a backup then it wasn't important.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • But the reality is it will work for people's needs, and they don't care about the technology that makes it. Clearly not everyone's needs, but that low end space where personal laptops were only used to type emails, watch content and browse websites, but they didn't want to do that on a small screen device. Heck, writing that out I can now see the connection and reason it'll do so well. Apple is about experience. If the experience is bad, they don't release it. Low end Windows laptop manufacturers up until this point have not taken that into consideration ever before, so slow laggy usage with brittle slimey plastic shells were common. I hope that the low end space at least creates better physical products that last a bit longer, and if Microsoft get their act together, they could also have a solid OS on such low end hardware that would actually make the experience work for what the hardware was intended for. The fact that the CPU is a "cellphone", sorry mobile phone processor is irrelevant. It's about the experience, and so far, that sounds quite solid.
    • Hello, Bonjour is Apple's implementation of a multicast-DNS service, which allows devices running Apple's software and/or hardware to find each other on your local network.  I believe the Windows version was last updated around 2010. If you do not need it, you can stop and disable the Bonjour service in the Services Control Manager (filename: SERVICES.MSC).  Once you have done that, the operating system will no longer attempt to load the service. Regards, Aryeh Goretsky  
    • This AMD RX 9070 16GB GPU that performs close to Nvidia 5070 is under $600 by Sayan Sen With the memory shortage that's prevalent nowadays, discounts are super-hard to get. As such we post good deals whenever they pop up. Recently, we covered a few great discounts on SSDs wherein you can get a 4TB TeamGroup NVMe PCIe Gen4 drive for just $400 thanks to a special coupon. If you want a faster product but don't need all that capacity, you can also opt for Samsung's 990 PRO 2TB that is on sale for its lowest price in over three months. Let's say though that you are on the hunt for a 1440p gaming card. In that case AMD's RX 9070 non-XT can help, and with its 16GB VRAM, you can also run AI models locally without worrying about bottlenecking (check out our recent 9070 GRE reviews for gaming and productivity to get an idea). The PowerColor Reaper variant of the RX 9070 is currently on sale for just $580 which is a very good price in the current state of affairs (purchase link under the specs table down below). The Reaper cooler on this 9070 uses a triple‑fan design with ring‑blade fans, paired with premium dual ball bearings to extend lifespan and reduce friction. "Intelligent" fan control allows the fans to remain idle at lower temperatures, only spinning up when the GPU is under load. A nickel‑plated copper base makes direct contact with both the GPU and memory modules, helping to spread heat evenly. PowerColor also applies Honeywell PTM7950 phase‑change thermal interface material (TIM), which fills microscopic gaps between the die and heatsink for more efficient thermal transfer. The fan shroud is shorter in height as the firm has made it such that it can be used in certain SFF (small form factor) cases. The technical specifications of the Reaper RX 9070 are given in the table below: Specification Value Stream Processors 3584 Units Video Memory 16GB GDDR6 Memory Speed 20.0 Gbps Memory Interface 256-bit Engine Clock Game Clock: up to 2070 MHz Boost Clock: up to 2520 MHz Bus Standard PCI Express 5.0 x16 Display Connectors 1 x HDMI 2.1b, 3 x DisplayPort 2.1a Maximum Resolution DisplayPort: 7680 × 4320 HDMI: 7680 × 4320 Board Dimensions 289mm × 111mm × 41mm 304mm × 127mm × 42mm (with bracket) Slot 2 Minimum System Power Requirement 600W Power Connectors Two 8-pin PCI Express Get the PowerColor Reaper RX 9070 at the links below (you get only a 90-day warranty on Woot): PowerColor Reaper Radeon RX 9070 16GB Graphics Card (RX9070 16G-A): $579.99 (Sold and Shipped by Amazon US) (Was: $700) PowerColor Reaper Radeon RX 9070 16GB Graphics Card (RX9070 16G-A): $559.99 (Sold and Shipped by Woot US) Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • Are they marketed as an entry into astronomy or astrophotography? I do astrophotography. With big rigs, lots of computers, cables and headaches. I love it. And by learning this ridiculously complex hobby, I’ve learned about the objects I’m shooting. Astronomy followed from photography.
    • Microsoft confirms Recycle Bin bug across all versions of Windows by Usama Jawad A couple of days ago, we reported that the latest Patch Tuesday update has seemingly resulted in a lot of issues for many users, including OneDrive and Dropbox access problems, BitLocker recovery lockouts, and BSODs. Although Microsoft is yet to acknowledge these bugs, it has confirmed another, relatively smaller issue across all supported versions of Windows. In an update on its Windows Release Health Dashboard, Microsoft has confirmed that after installing June's Patch Tuesday update (KB5094126), you'll experience unexpected behavior when leveraging Recycle Bin. Basically, when you attempt to delete an item from the Recycle Bin, the confirm dialog will show you the internal file name of that content rather than the actual name. For example, the file may be named abc.png, but the confirm dialog will ask if you're sure that you want to permanently delete $Rxxxxx.png from the Recycle Bin. This is pretty much it for the scope of the bug itself; it just displays the wrong name in the confirm dialog. The correct name will be shown in the list view of the Recycle Bin and if you restore the file, it will return with the correct name as well. This issue affects pretty much all supported versions of Windows client and server, including: Client: Windows 11, version 26H1; Windows 11, version 25H2; Windows 11, version 24H2; Windows 11, version 23H2; Windows 10, version 22H2; Windows 10 Enterprise LTSC 2021; Windows 10 Enterprise LTSC 2019; Windows 10 Enterprise LTSB 2016 Server: Windows Server 2025; Windows Server 2022; Windows Server 2019; Windows Server 2016; Windows Server 2012 R2; Windows Server 2012 As things currently stand, Microsoft is working on a concrete solution that will be released in a "future" Windows update. It remains to be seen if the firm will wait till the next Patch Tuesday or roll out an out-of-band (OOB) fix. The good news is that commercial customers can deploy a workaround right now, but they will have to reach out to Microsoft Support for Business for additional details.
  • Recent Achievements

    • Week One Done
      Jordan Smith earned a badge
      Week One Done
    • Reacting Well
      BizSAR earned a badge
      Reacting Well
    • First Post
      AndreaB earned a badge
      First Post
    • Week One Done
      Huge Trailer earned a badge
      Week One Done
    • Week One Done
      Classifyskilleducation earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      578
    2. 2
      +Edouard
      184
    3. 3
      PsYcHoKiLLa
      75
    4. 4
      Michael Scrip
      72
    5. 5
      neufuse
      64
  • Tell a friend

    Love Neowin? Tell a friend!