OCZ Agility 3 - Buy or Avoid?


Recommended Posts

Thanks for all the responses, everyone. After mulling it over for the past hour, I think I'll keep waiting and set my money aside for a Samsung 830. I'll probably leave it until the next generation graphics card come around, as I'm waiting for those too.

I've had 2 OCZ Agility 3's in RAID 0 for the past year. Great SSD's. Initially I have a few problems with them, but as soon as I found out about the firmware updates, I updated them and they are now flawless! I maintain ~750MB/S r/w in RAID 0.

Every product has failures - that's unavoidable. But, OCZ just has high failure rates, and that should be enough as a consumer to sway you away. Why gamble with a product like an SSD? You're storing information, and it's an inconvenience if it fails. In either case, backup your data regardless of the brand. OCZ's tend to be slightly cheaper than the competition, but I would buy Intel, Crucial, Samsung for a few $ more. Having used an OCZ drive, and seeing it fail (amongst my friends') does not put a good reputation of them in my mind.

Every Hd can fail to be honest.

My raptor failed last year. It was around 5 years old. Not that old for a HHD.

It doesn't matter which brand you own you should always back up important data. I have a slow cheap 750GB external HDD that i use to backup all my data including a ghost of the OS. When my raptor died i replaced it with a Vertex 3 and restored the data from the external HDD.

If this is a home computer i would say buy the best bang for the bucks. Everytime i see someone recommending Intel SSDs for home computer i am shocked. You can get a Samsung 830 for like 20$ less in Canada than an Intel SSD. Intel SSDs have always been some of the most expensive on the market. They are not worth it for home computer.

OCZ used to be less expensive and a good buy despite the reliability problems. But it's not really true anymore as the Samsung 830 is now actually less expensive anyway in Canada.

Avoid anything OCZ. They just laid of a bunch of people and are going down probably soon. I have a Vertex 3 and it's good---faster than an HDD, and I'm happy with it, but it could be better. Get the Samsung 830. Don't clone the drive!!! Do a fresh install!!!

You can clone the drive, if the cloning software knows about SSD's and align's it properly.

You can clone the drive, if the cloning software knows about SSD's and align's it properly.

Meh...I wouldn't. Windows 7 does a different type of install for SSDs. It disables parts of the OS (like disk defrag super fetch, etc.) and enables Trim and AHCI for you.

Lol at all the people arguing against OCZ. Here is a list of OCZ drives I have/had owned:

OCZ Vertex 3 Max IOPS 240GB

OCZ Agility 3 240GB

OCZ Vertex 4 256GB

OCZ Octane 512GB

OCZ Vertex 2 60GB

OCZ Vertex 2 120GB

Drives that failed so far: None.

Seems the view on these is polarised. I know people that swear by them and people that have nothing but trouble with them.

Haven't heard anything bad about the 4th gen though.

Meh...I wouldn't. Windows 7 does a different type of install for SSDs. It disables parts of the OS (like disk defrag super fetch, etc.) and enables Trim and AHCI for you.

It also makes the necessary changes on a clone. I had no problem when I cloned my hard disc to my SSD.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Microsoft finally admits its default Windows 11 25H2, 24H2 action broke key legacy component by Sayan Sen Microsoft last week released Windows 11 KB5094126 and KB5093998 as the latest Patch Tuesday updates. Following that the company also published the accompanying dynamic updates under KB5094149, KB5095971, and KB5094156. So far the company has acknowledged two known issues that have popped up after the release which include bugged-out Office apps as well as the Recycle Bin; though there could be more at play too. Speaking of bugs and issues, Microsoft seems to have finally acknowledged a problem that probably has been around for close to a year. That's because back in July of 2025 the company made a default change to the latest Windows 11 versions, wherein it switched to JScript9Legacy on Windows 11 24H2 and later releases. Hence following the release of version 25H2 in October 2025, JScript9Legacy also remained default-enabled. As a result there has been a compatibility issue ever since then. For those wondering, by switching to JScript9Legacy Microsoft intended to improve the security of modern Windows PCs by reducing vulnerabilities tied to legacy scripting like cross-site scripting (XSS), among others. XSS exploits can allow cyber-attackers to attach malicious code onto legitimate websites and use them to execute the code when a potential victim loads such a website. Hence the new JScript9Legacy engine enforced stricter execution policies and improved object handling, which should help mitigate such attacks. Microsoft today has published a new support article detailing the problem. Neowin spotted it while browsing. The company says that JScript global definitions and execution context may fail to persist across scripts, potentially breaking older dependent apps and web-based components that relied on this legacy behavior. In the article Microsoft has confirmed that the issue stems from its move away from the older jscript9.dll engine in favor of jscript9legacy.dll. As mentioned above, while the newer engine was designed to address vulnerabilities and strengthen security it also changes how JScript handles execution context. As a result functions and definitions loaded by one script could no longer remain available to subsequent scripts once execution ended. The company notes that some applications worked correctly on earlier Windows versions because the older JScript engine automatically retained global definitions and execution state between scripts. Under the newer model though that behavior is disabled by default causing certain legacy workloads and polyfill-dependent scripts to fail. Microsoft says it addressed the problem via the KB5077241 update though the fix had not been enabled automatically in the following updates. As such admins must explicitly turn on persistent JScript execution context using a Registry setting that the tech giant shared today. The configuration can be applied to individual processes or system-wide through the FEATURE_ENABLE_PERSISTENCE registry key. The steps have been outlined below: Run the following command to create the feature control registry key: reg add "HKLM\Software\Policies\Microsoft\Internet Explorer\Main\FeatureControl\FEATURE_ENABLE_PERSISTENCE" Under this key, create a new DWORD (32-bit) value. Configure the value as follows: To enable persistence for specific processes only: Set the value to 1 for each target process name. To enable persistence for all processes: Add * as the key name and set its value to 1. You can find the official support article here on Microsoft's website.
    • The possibility that milk gathers back into a glass implies that gravity can be 'reversed'.
    • VidCoder 12.20 by Razvan Serea  VidCoder is a DVD/Blu-ray ripping and video transcoding application for Windows. It uses HandBrake as its encoding engine. Calling directly into the HandBrake library gives it a more rich UI than the official HandBrake Windows GUI. VidCoder can rip DVDs but does not defeat the CSS encryption found in most commercial DVDs. You’ll need the NET 8 Desktop Runtime. If you don’t have it, VidCoder will prompt you to download and install it. The Portable version is self-contained and does not require any .NET Runtime to be installed. You do not need to install HandBrake for VidCoder to work. Feature list: Multi-threaded MP4, MKV containers Completely integrated encoding pipeline: everything is in one process and no huge intermediate temporary files H.264, H.265, MPEG-4, MPEG-2, VP8, Theora video Hardware-accelerated encoding with AMD VCE, Nvidia NVENC and Intel QuickSync AAC, MP3, Vorbis, AC3, FLAC audio encoding and AAC/AC3/MP3/DTS/DTS-HD passthrough Target bitrate, size or quality for video 2-pass encoding Decomb, detelecine, deinterlace, rotate, reflect, chroma smooth, colorspace filters Powerful batch encoding with simultaneous encodes Customizable Pickers to automatically pick audio and subtitle tracks, destination, titles and more Instant source previews Creates small encoded preview clips Pause, resume encoding VidCoder 12.20 changes: Updated HandBrake core to 1.11.2. Download: VidCoder 12.20 | 47.0 MB (Open Source) Download: Portable VidCoder 12.19 | 89.3 MB Link: VidCoder Home Page | Github | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Too soon, I'm still not over this death!
  • Recent Achievements

    • Week One Done
      Jordan Smith earned a badge
      Week One Done
    • Reacting Well
      BizSAR earned a badge
      Reacting Well
    • First Post
      AndreaB earned a badge
      First Post
    • Week One Done
      Huge Trailer earned a badge
      Week One Done
    • Week One Done
      Classifyskilleducation earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      593
    2. 2
      +Edouard
      185
    3. 3
      PsYcHoKiLLa
      77
    4. 4
      Michael Scrip
      73
    5. 5
      Steven P.
      66
  • Tell a friend

    Love Neowin? Tell a friend!