Recommended Posts

Where are the 1TB SSDs. In the UK you can now pick up a decent 512GB SSD for around ?300-?350, so I would have thought that 1TB SSDs would have started to become more common...

But besides the OCZ Octane (at circa ?2000) and Kingmax (apparently sub ?1000 in Japan but not available in the UK), there doesn't seem to be any...

Any ideas as to why this might be?

Link to comment
https://www.neowin.net/forum/topic/1118469-1tb-ssds/
Share on other sites

Its likely because 1000GB of solid state memory in a 2.5" form is hard to achieve reliability with current technology...

you would essentially have to half the size of all your components to double the storage, so you would need to print the chips twice as fine as currently printed. This technology exists but the ROI isn't as great as doing a ton of smaller, cheaper, higher profit margin reliable drives. Obviously if something is half the size its twice as fragile, and with electronics its likely to have heat dissipation issues.

Link to comment
https://www.neowin.net/forum/topic/1118469-1tb-ssds/#findComment-595309605
Share on other sites

If you really do want a 1GB SSD, they are available from Newegg.

One reason for the cost is probably due to the low demand for the storage amount, once demand gets higher, the manufacturing process gets more streamlined and the technology evolves more then the price per GB will decrease.

$2700US?!?! 2 x 512GB it is then :rofl:

Link to comment
https://www.neowin.net/forum/topic/1118469-1tb-ssds/#findComment-595309695
Share on other sites

Oppps forgot 1TB :). I've been waiting for larger storage capacities at a lower price for SSDs too. My guess is the price will be around $100 to $200 for 1TB SSD drives with hard drive disks being in capacities of 10TB to 50TB or possibly more by that time since we are already at 4TB or higher now. We might get lucky and the transfer speed may also double by then too.

Link to comment
https://www.neowin.net/forum/topic/1118469-1tb-ssds/#findComment-595309771
Share on other sites

Are they reliable enough to be used as data storage, compared to traiditional hard disks?

For what I know, they used to have a very limited lifetime... not sure about now, thus the question.

I'm not sure they are there yet in a storage and archival sense, but they are fine for transient data. Either way, backups are always in order.

Link to comment
https://www.neowin.net/forum/topic/1118469-1tb-ssds/#findComment-595309789
Share on other sites

Are they reliable enough to be used as data storage, compared to traiditional hard disks?

For what I know, they used to have a very limited lifetime... not sure about now, thus the question.

Unless you need and know why you need to use them as a storage, the chances are you don't.

As for reliability, unless you're writing across the drive continually current spec SSD drives have a very good life.

http://www.ocztechnology.com/ocz-vertex-4-sata-iii-2-5-ssd.html offers 2 million hours run time before it fails.

Link to comment
https://www.neowin.net/forum/topic/1118469-1tb-ssds/#findComment-595309811
Share on other sites

$2700US?!?! 2 x 512GB it is then :rofl:

Well - that was kind of my point. I'd understand if they carried a 10% premium over 2x512GB, but 400% is a little too much for my liking.

Unless you need and know why you need to use them as a storage, the chances are you don't.

As for reliability, unless you're writing across the drive continually current spec SSD drives have a very good life.

http://www.ocztechno...ii-2-5-ssd.html offers 2 million hours run time before it fails.

2 million hours mean time before failure - this is a marketing expression and a meaningless number. I can guarantee you, OCZ have not had one of these running for 2 million hours (as it's 228 years)

Link to comment
https://www.neowin.net/forum/topic/1118469-1tb-ssds/#findComment-595310369
Share on other sites

Yeah I'm also kinda shocked no one has made some sort of adaptor that fits two drives.

These do exist...

http://www.scan.co.uk/products/icy-box-ib-rd2121sts-2x-25-sata-hdd-ssd-raid-converter

Link to comment
https://www.neowin.net/forum/topic/1118469-1tb-ssds/#findComment-595310381
Share on other sites

Where are the 1TB SSDs. In the UK you can now pick up a decent 512GB SSD for around ?300-?350, so I would have thought that 1TB SSDs would have started to become more common...

But besides the OCZ Octane (at circa ?2000) and Kingmax (apparently sub ?1000 in Japan but not available in the UK), there doesn't seem to be any...

Any ideas as to why this might be?

Take a read of this to explain the current absense (mostly) of 1TB SSD's:

http://www.anandtech.com/show/6200/owc-mercury-electra-3g-max-960gb-review-cramming-1tb-of-nand-inside-25-chassis

Link to comment
https://www.neowin.net/forum/topic/1118469-1tb-ssds/#findComment-595310385
Share on other sites

I'm guessing the reason for that is that the form factor is universal, it can be used in laptops and desktops, I agree with you though. However the gist I get from that article is that they're currently limited by what the controllers can handle more than anything else, but by this time next year it sounds as if there will be more 1TB drives.

Link to comment
https://www.neowin.net/forum/topic/1118469-1tb-ssds/#findComment-595310423
Share on other sites

This topic is now closed to further replies.
  • Posts

    • Microsoft finally admits its default Windows 11 25H2, 24H2 action broke key legacy component by Sayan Sen Microsoft last week released Windows 11 KB5094126 and KB5093998 as the latest Patch Tuesday updates. Following that the company also published the accompanying dynamic updates under KB5094149, KB5095971, and KB5094156. So far the company has acknowledged two known issues that have popped up after the release which include bugged-out Office apps as well as the Recycle Bin; though there could be more at play too. Speaking of bugs and issues, Microsoft seems to have finally acknowledged a problem that probably has been around for close to a year. That's because back in July of 2025 the company made a default change to the latest Windows 11 versions, wherein it switched to JScript9Legacy on Windows 11 24H2 and later releases. Hence following the release of version 25H2 in October 2025, JScript9Legacy also remained default-enabled. As a result there has been a compatibility issue ever since then. For those wondering, by switching to JScript9Legacy Microsoft intended to improve the security of modern Windows PCs by reducing vulnerabilities tied to legacy scripting like cross-site scripting (XSS), among others. XSS exploits can allow cyber-attackers to attach malicious code onto legitimate websites and use them to execute the code when a potential victim loads such a website. Hence the new JScript9Legacy engine enforced stricter execution policies and improved object handling, which should help mitigate such attacks. Microsoft today has published a new support article detailing the problem. Neowin spotted it while browsing. The company says that JScript global definitions and execution context may fail to persist across scripts, potentially breaking older dependent apps and web-based components that relied on this legacy behavior. In the article Microsoft has confirmed that the issue stems from its move away from the older jscript9.dll engine in favor of jscript9legacy.dll. As mentioned above, while the newer engine was designed to address vulnerabilities and strengthen security it also changes how JScript handles execution context. As a result functions and definitions loaded by one script could no longer remain available to subsequent scripts once execution ended. The company notes that some applications worked correctly on earlier Windows versions because the older JScript engine automatically retained global definitions and execution state between scripts. Under the newer model though that behavior is disabled by default causing certain legacy workloads and polyfill-dependent scripts to fail. Microsoft says it addressed the problem via the KB5077241 update though the fix had not been enabled automatically in the following updates. As such admins must explicitly turn on persistent JScript execution context using a Registry setting that the tech giant shared today. The configuration can be applied to individual processes or system-wide through the FEATURE_ENABLE_PERSISTENCE registry key. The steps have been outlined below: Run the following command to create the feature control registry key: reg add "HKLM\Software\Policies\Microsoft\Internet Explorer\Main\FeatureControl\FEATURE_ENABLE_PERSISTENCE" Under this key, create a new DWORD (32-bit) value. Configure the value as follows: To enable persistence for specific processes only: Set the value to 1 for each target process name. To enable persistence for all processes: Add * as the key name and set its value to 1. You can find the official support article here on Microsoft's website.
    • The possibility that milk gathers back into a glass implies that gravity can be 'reversed'.
    • VidCoder 12.20 by Razvan Serea  VidCoder is a DVD/Blu-ray ripping and video transcoding application for Windows. It uses HandBrake as its encoding engine. Calling directly into the HandBrake library gives it a more rich UI than the official HandBrake Windows GUI. VidCoder can rip DVDs but does not defeat the CSS encryption found in most commercial DVDs. You’ll need the NET 8 Desktop Runtime. If you don’t have it, VidCoder will prompt you to download and install it. The Portable version is self-contained and does not require any .NET Runtime to be installed. You do not need to install HandBrake for VidCoder to work. Feature list: Multi-threaded MP4, MKV containers Completely integrated encoding pipeline: everything is in one process and no huge intermediate temporary files H.264, H.265, MPEG-4, MPEG-2, VP8, Theora video Hardware-accelerated encoding with AMD VCE, Nvidia NVENC and Intel QuickSync AAC, MP3, Vorbis, AC3, FLAC audio encoding and AAC/AC3/MP3/DTS/DTS-HD passthrough Target bitrate, size or quality for video 2-pass encoding Decomb, detelecine, deinterlace, rotate, reflect, chroma smooth, colorspace filters Powerful batch encoding with simultaneous encodes Customizable Pickers to automatically pick audio and subtitle tracks, destination, titles and more Instant source previews Creates small encoded preview clips Pause, resume encoding VidCoder 12.20 changes: Updated HandBrake core to 1.11.2. Download: VidCoder 12.20 | 47.0 MB (Open Source) Download: Portable VidCoder 12.19 | 89.3 MB Link: VidCoder Home Page | Github | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Too soon, I'm still not over this death!
  • Recent Achievements

    • Week One Done
      Jordan Smith earned a badge
      Week One Done
    • Reacting Well
      BizSAR earned a badge
      Reacting Well
    • First Post
      AndreaB earned a badge
      First Post
    • Week One Done
      Huge Trailer earned a badge
      Week One Done
    • Week One Done
      Classifyskilleducation earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      593
    2. 2
      +Edouard
      185
    3. 3
      PsYcHoKiLLa
      77
    4. 4
      Michael Scrip
      73
    5. 5
      Steven P.
      66
  • Tell a friend

    Love Neowin? Tell a friend!