Google Apps, Outlook, Lots of attachments, limited bandwidth.


Recommended Posts

I have a client using Google Apps with Microsoft Outlook (using Google Apps Sync for Outlook).

They are sending more and more attachments internally and externally since going to Google Apps. 25 Users.

It has got to the point where the internet has slowed to a crawl and sending emails in Outlook is taking a long time because of the bandwidth issue.

Their Internet connection (ADSL2+) is getting 6Mbps UP and 0.8Mbps DOWN, and that's with Annex-M. They pay around $50/m for this.

To get this upload speed up, the next options are rather high-end: SHDSL, Wireless Point-to-Point, Midband Ethernet, Fibre, etc. They all require long-term contracts. The cheapest I can find for any of these is $425/m (for a measly 2Mbps) which is beyond their budget because they are bit tight at the moment in their current situation (even though they have 25 users at the moment).

If you want to see what high-end options are available in Australia: Exetel are probably going to be the cheapest to use as a baseline figure.

There is also 4G LTE available, very fast from what I hear (20+ Mbps DOWN, 10+ Mbps UP) but bandwidth will be limited: $80/m for 20GB, counted both uploads and downloads in that 20GB quota. Excess usage is $20/GB.

The users are not very computer literate and do not want to be re-trained into using Gmail (easiest solution) instead of Outlook, so unfortunately this is NOT an option.

They have a Windows Server 2008 R2 machine at their disposal which can be used.

All options are on the table, looking for ideas and suggestions, and the simpler the better (eg. Off the shelf tools)... but I can go as technical as need be (which it might have to be).

On the connection front...

I'm quite hesitant in pushing towards an expensive option (eg. $425/m) even if they say they can't afford it, because with the way they are going, I don't think that even 2Mbps upload (for $425/m)would be enough, and they will be spending thousands per month (and locked into contract) before they get decent speeds.

4G LTE is possible (if the traffic can be limited to only sending emails to stay within bandwidth quotas).

So is getting a secondary (or tertiary) ADSL2+ line (hopefully on a pair with a better Sync speed) also @ $50/m

But then there is the case of making all these cheap connections work together.

I can't think of anyway of load balancing between diverse connections, the only equipment I can find only does fall-over.

Does anyone have suggestions for load balancing across different connections?

Ideas I can think of

  • 2x ADSL lines, half the users have one default gateway, the other half have the other as the default gateway
  • 1x ADSL line + 1x4G LTE, Set a Static Route in the router to route traffic to Google's IP ranges to the 4G LTE gateway (Google Apps Sync tool does not use IMAP/SMTP servers etc. AFAIK so it would be hard to have an SMTP relay)
  • 1x ADSL line + 1x4G LTE, Outlook configured to send using a local Proxy Server or SMTP server (Proxy to SMTP configured to route via. the LTE) instead of Google Apps Sync tool (Is this even possible!?????)

On the limiting bandwidth front...

If there is a way to limit the external bandwidth being used in the first place, then the connection speed is not so important.

Ideas I can think of

  • An Outlook Add-In that strips an attachment that a user tries to send/forward and put it on Dropbox or Google Docs. I can't find any products that do this for Outlook, only ones that save a copy of the attachments without stripping.
    • Even with this, bandwidth would be wasted with multiple users downloading from Dropbox/Google Docs website constantly (Proxy Server Cache maybe?)
    • If it could be put into a local Dropbox then it could LAN-Sync to other PCs without using external bandwidth, but then there is the problem of being able to share the link to other users in their own local Dropbox, it will be particularly troublesome for External recipients.

    [*]I found this product Outdisk FTP, it looks fairly similar to what I'm looking for above except it uses FTP/HTTP. Maybe use a local FTP/HTTP server, and synchronise the FTP to an external webhost (or Synchronise only the files needed on demand), for external users to access. Or just cop the hit for external users to access the locally hosted FTP/HTTP user even though it's going to be slow.

Yes I realise that things might be getting a bit long winded here. That's why I am coming to the smart Neowin folk who might be able to shed their 2c in what they think the best solutions are going to be. Hopefully I missed some easy answers. User re-training must be very small (no more than an extra click MAX and that's pushing it) because they are very stuck in their ways.

  • 1 month later...

Just an update on this, I looked into all the options and have been getting some pricing on Ethernet over Copper (ELM) which does at least 10/10Mbps up/down synchronous, and it's a fraction of the cost of Fibre. 4G is good, very good (tested 40Mbps down, 20Mbps up - clear LoS with tower across road) but data costs a lot when charged per GB, and at the end of the day it is not a business guaranteed service with an SLA.

They agreed that they want to spend the cash to fix the connection speed.

It turns out that they could probably save a lot by moving from ISDN to VOIP.

There is another company that I use for VOIP conversions, and they are fantastic. I know many clients using them with 0 problems.

Their ADSL line will stay and be dedicated only for VOIP use (They tell me that 0.8Mbps upload is enough for at least 12 simultaneous VOIP calls) and this would take the worry out of needing QoS.

Hopefully when this all comes through they will be paying more for internet, but about the same amount less for phones.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • With the current hardware prices Microsoft should lift the restriction. Then if you have the correct TPM then allow you to use X feature, if you don't have the correct TPM then don't but still actually let you run windows. 11. With a disclaimer during install that X features would be unavailable.
    • It's good for recycling of course. But commence inflation of a second hand RAM bubble and price gouging on DDR 4 inventory in 3... 2... 1...
    • Bypassed Windows 11 shows surprising stability on ancient, completely unsupported hardware by Sayan Sen When Windows 11 was first released, one of the most complained-about issues with the new desktop Microsoft OS was its higher system requirements, which pushed many relatively modern and powerful processors and devices onto the officially unsupported list. Thankfully, they have not been updated again for the base OS, though systems require four times the memory and storage if they want to run AI-powered apps and features. As such, Windows 11 technically runs on 4GB of memory, and there is no imposed restriction on the generation of memory it supports. Speaking of memory, prices are extremely high nowadays for hardware, especially DDR5 and DDR4 kits due to the current silicon shortage, and there are also reports of it affecting DDR2 as well, and it might only be a matter of time before even DDR1 gets affected. Before that could happen, an enthusiast took an ancient DDR1-based system and decided to try out Windows 11 on it to see how well the modern OS would fare on such hardware. The system runs an outdated graphics card interface standard based on AGP, or Advanced Graphics Port, called AGP 3.0 or AGP8x. AGP was essentially succeeded by the modern PCI Express (PCIe) bus standard. The user behind the experiment is retro hardware enthusiast Omores, who built the system around an ASRock ConRoe865PE motherboard based on Intel's i865PE chipset from way back in 2003, around the time when AGP was still in fashion. What made this board special back in the day was its unusual support for newer Core 2 Duo and even Core 2 Quad processors while still retaining older DDR1 memory support and an AGP8X graphics slot, making it an ideal bridge or link between two vastly different generations. Powering the machine was Intel's Core 2 Quad Q6600 alongside 3GB of DDR1 RAM and an ATI Radeon HD 4650 AGP graphics card, one of the final and most capable GPUs released for the aging AGP interface. While installing Windows 11 itself was relatively easy by bypassing Microsoft's hardware checks, getting the graphics card fully functional proved to be some challenge. Microsoft had quietly dropped native AGP support after the earliest releases of Windows 10, meaning newer versions of Windows no longer include the necessary Graphics Address Remapping Table (GART) drivers required for proper AGP acceleration. Without them, AGP graphics cards typically boot up, though with limited functionality, and can often throw a Code 43 error in Device Manager. To work around the limitation, Omores extracted Intel's legacy AGP440 SYS driver from an early Windows 10 release and paired it with a modified INF file so Windows 11 would correctly recognize the chipset. Following this and combined with AMD's final 64-bit Catalyst AGP drivers from 2012, the Radeon HD 4650 was able to operate with full AGP 8X acceleration intact. The result was said to be surprisingly usable for hardware that is over two decades old. Hardware-accelerated H.264 video playback worked correctly and benefited apps like Firefox, while legacy applications and games ran without major graphical issues. The system also successfully completed the 3DMark 2001 benchmark, although performance naturally lagged behind what the same hardware achieves under Windows 7, which is significantly lighter than Windows 11. There was, however, one unavoidable limitation as Microsoft's Windows 11 version 24H2 introduces a mandatory SSE4.2 CPU instruction requirement that cannot be bypassed through installer modifications or registry tweaks. Since no AGP-era processor supports SSE4.2, Windows 11 version 23H2 effectively becomes the final release capable of running on such systems. Regardless, it is still a very cool feat and quite fascinating to see just how stable Windows 11 turned out to be on such unfamiliar hardware. Source: Omores (Patreon) via O_MORES (Reddit)
    • That will only really help other players that are also responsible for creating the problem.
    • Well, it's good to know that they have found a workaround to a problem that they helped create, I guess...
  • Recent Achievements

    • Reacting Well
      NovaEdgeX earned a badge
      Reacting Well
    • Week One Done
      NovaEdgeX earned a badge
      Week One Done
    • One Year In
      BA the Curmudgeon earned a badge
      One Year In
    • Conversation Starter
      rosiecharles earned a badge
      Conversation Starter
    • First Post
      KMilenkoski1202 earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      538
    2. 2
      +Edouard
      266
    3. 3
      PsYcHoKiLLa
      151
    4. 4
      Steven P.
      98
    5. 5
      macoman
      66
  • Tell a friend

    Love Neowin? Tell a friend!