Looking to buy a new motherboard and processor


Recommended Posts

I bought my current motherboard and processor around six years ago and in the intervening six years I haven't kept up with the hardware side of things.

I think my motherboard is on it's way out and want to replace it.

I'm looking for recommendations for motherboards and processors to buy.

My current motherboard is an Asus M2N32 sli deluxe with an AMD Athlon 64 X2 5200+ 2.6 GHz processor.

Looking to spend at the most ?150

I'd ideally like it to have as many sata ports as possible and be able to use my existing memory and power supply.

No modern motherboard sockets still support DDRII, it's all DDRIII now, your best bet is to sell your DDRII and buy some DDRIII, it's surprisingly cheap (the 8 gig kit I have cost under ?40 and it's pretty quick).

The cheapest board and CPU I could find in your price range were:

CPU

Board

Unfortunately I couldn't find any board in your price range that has more than 6 SATA sockets, if you want an 8 socket board you'll probably have to spend a bit more money. The kit I added was just over ?150, if you go any cheaper on the motherboard most usually have 4 slots

Damn, I have been out the game to long. Thanks Javik, I'll have a look and save some more pennies up then.

My current mobo has six so if it's got at least six I'm cool with that.

Damn, I have been out the game to long. Thanks Javik, I'll have a look and save some more pennies up then.

My current mobo has six so if it's got at least six I'm cool with that.

Then you should be OK with the parts I picked, they came to ?162 but they're pretty good components for that price, and what's more the ivy bridge i3 should be pretty efficient meaning your current PSU will have enough grunt. If you sell your current memory you'll probably only have a shortfall of around ?10 to make up, if you don't need an 8 gig kit however, this 4 GB kit represents excellent value

View

My dollars to pounds sense isn't too great, but I'm thinking for that price a Pentium G2120, or the low end Ivy Bridge Core i3 and a decent Ivy Bridge motherboard. The B75 series motherboards are reasonably priced, and pretty solid compared to the low end Sandy Bridge boards.

Assuming your needs are being met with a six year old CPU now, you don't need anything high end, and with a 1155 board, you could upgrade the CPU to an i7 down the line once they're old hat.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Onkyo Dolby Atmos AV receivers are really solid deals by Sayan Sen Recently we covered great deals on several soundbar models from the likes of Sony, JBL, Samsung and others for really good prices (the lowest in several months). Aside from that we also reported on the Edifier S3000MKII, a hi-fi two-way bookshelf monitor that's available for only $800. Today we bring a list of AV receivers from Onkyo that are available at great prices including the Onkyo NR7100, RZ30, and 8470 (purchase links under the specs table down below). The Onkyo TX-NR7100 and Onkyo TX-RZ30 are both 9.2-channel AV receivers designed for immersive home theater setups but they occupy slightly different tiers within Onkyo’s lineup with the RZ30 positioned as the more advanced model. The TX-NR7100 is a THX Certified 9.2-channel receiver offering up to 100 W per channel (8 ohms, 2 channels driven). It supports Dolby Atmos, DTS:X, and IMAX Enhanced formats, with flexible configurations such as 5.1.4 or 7.1.2 speaker layouts. A key highlight is its built-in Dirac Live Room Correction which should help optimize sound based on your room and its acoustics. In comparison, both models share several core capabilities though the RZ30 is geared toward enthusiasts seeking more precise calibration and system flexibility, while the NR7100 is positioned as a slightly more accessible, value-focused option with strong all-round performance. The technical specs of the RZ30 and NR7100 9.2 AVRs are given in the table below: Specification Onkyo TX-RZ30 Onkyo TX-NR7100 Power Output (FTC, 2ch driven) ~100 W/ch (8Ω, 20Hz–20kHz, 0.08% THD) 100 W/ch (8Ω, 20Hz–20kHz, 0.08% THD) Dynamic / Peak Power 9 × 170 W (6Ω, 1kHz, 1% THD, 1ch driven) 220 W/ch (6Ω, 1kHz, 10% THD, 1ch driven) Frequency Response 5 Hz – 100 kHz (+1/-3 dB) 10 Hz – 100 kHz (+1/-3 dB) THD 0.08% 0.08% Room Correction Dirac Live (full bandwidth) Dirac Live (with AccuReflex support) Immersive Audio Dolby Atmos, DTS:X, IMAX Enhanced Dolby Atmos, DTS:X, IMAX Enhanced Speaker Layout Support Up to 7.2.2 / 5.2.4 / 9.2 processing Up to 7.2.4 / 5.2.4 / 9.2 processing HDMI Inputs / Outputs 6 inputs / 2 outputs (eARC) 6 inputs / 2 outputs (Main + Sub/Zone 2) HDMI 2.1 Support 8K/60, 4K/120, VRR, ALLM, QFT, DSC, eARC 8K/60, 4K/120, VRR, ALLM, QFT, DSC, eARC Video Formats HDR10+, Dolby Vision, HDCP 2.3 HDR10+, Dolby Vision, HDCP 2.3 Streaming / Network Wi-Fi, AirPlay 2, Chromecast, Bluetooth, DTS Play-Fi Wi-Fi, AirPlay 2, Chromecast, Bluetooth, DTS Play-Fi Get them at the links below: Onkyo TX-RZ30 9.2-Channel AV Receiver: $797.00 (Sold and shipped by Electronic Expo) Onkyo TX-NR7100 9.2-Channel AV Receiver: $699.00 (Sold and shipped by Adorma) Onkyo TX-8470 2 Ch Stereo Receiver: $449.00 (Sold and Shipped by Adorma) Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links or authorized dealer links (at the time of article publishing); ensure that you purchase from such links only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • A different thing with Russia. When you say is it better, depends on things. It is better that we don't have the E.U making rules and laws that have nothing to do with them. Is the trading part better? No, that is really mucked up, but then we knew that was going to happen and we would have make agreements, like we do with other parts of the world. Freedom of movement is certainly better, but could be improved, we still need more control over our borders. do you live in the U.K?
    • So what am I quoting from them? I never listened to what Farage or his cronies said. I wanted the U.K to leave the E.u years before the referendum and it had nothing to do with Farage and his cronies. So what country do you live in? Did we work much better together? We were always at logger heads with the E.U because we disagreed with them so much. Maggie was always on at them. I would have thought the E.U was glad to get rid of us as we stopped the integration or made it a two tier. Now without us they can integrate more. I would not have voted out if it was just a trading block and we can still work together on somethings.
  • Recent Achievements

    • Week One Done
      flexorcist earned a badge
      Week One Done
    • One Month Later
      Woland13 earned a badge
      One Month Later
    • Week One Done
      Woland13 earned a badge
      Week One Done
    • One Year In
      bernmeister earned a badge
      One Year In
    • Week One Done
      Scoobystu earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      498
    2. 2
      +Edouard
      224
    3. 3
      PsYcHoKiLLa
      148
    4. 4
      Steven P.
      74
    5. 5
      FloatingFatMan
      70
  • Tell a friend

    Love Neowin? Tell a friend!