Looking to buy a new motherboard and processor


Recommended Posts

I bought my current motherboard and processor around six years ago and in the intervening six years I haven't kept up with the hardware side of things.

I think my motherboard is on it's way out and want to replace it.

I'm looking for recommendations for motherboards and processors to buy.

My current motherboard is an Asus M2N32 sli deluxe with an AMD Athlon 64 X2 5200+ 2.6 GHz processor.

Looking to spend at the most ?150

I'd ideally like it to have as many sata ports as possible and be able to use my existing memory and power supply.

No modern motherboard sockets still support DDRII, it's all DDRIII now, your best bet is to sell your DDRII and buy some DDRIII, it's surprisingly cheap (the 8 gig kit I have cost under ?40 and it's pretty quick).

The cheapest board and CPU I could find in your price range were:

CPU

Board

Unfortunately I couldn't find any board in your price range that has more than 6 SATA sockets, if you want an 8 socket board you'll probably have to spend a bit more money. The kit I added was just over ?150, if you go any cheaper on the motherboard most usually have 4 slots

Damn, I have been out the game to long. Thanks Javik, I'll have a look and save some more pennies up then.

My current mobo has six so if it's got at least six I'm cool with that.

Damn, I have been out the game to long. Thanks Javik, I'll have a look and save some more pennies up then.

My current mobo has six so if it's got at least six I'm cool with that.

Then you should be OK with the parts I picked, they came to ?162 but they're pretty good components for that price, and what's more the ivy bridge i3 should be pretty efficient meaning your current PSU will have enough grunt. If you sell your current memory you'll probably only have a shortfall of around ?10 to make up, if you don't need an 8 gig kit however, this 4 GB kit represents excellent value

View

My dollars to pounds sense isn't too great, but I'm thinking for that price a Pentium G2120, or the low end Ivy Bridge Core i3 and a decent Ivy Bridge motherboard. The B75 series motherboards are reasonably priced, and pretty solid compared to the low end Sandy Bridge boards.

Assuming your needs are being met with a six year old CPU now, you don't need anything high end, and with a 1155 board, you could upgrade the CPU to an i7 down the line once they're old hat.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Opinion. All you did was blame Democrats for everything. You offered nothing but a hit piece to support your pro Trump, anti union right wing ideology.
    • Excuse me for having an opinion, fella'... (Why am I not surprised?...) Congrats on your very informative post however...
    • By the sounds of that wall of Fox News propaganda gibberish attacking the Democratic Party you've already had plenty of "juices" flowing this morning. You've ruined what could have been a productive comment thread.
    • (Topic to get the juices flowing this Sunday morning!...) Actually, the situation has almost nothing to do with "lack of skills", especially since assembly-line skills can be taught to anyone, including Americans, certainly. Rather, the inadequacy-to-impossibility of large-scale tech manufacturing in America today, and the reasons why America finds tech manufacturing completely onerous in the 21st century, has to do with politically driven laws amid a plethora of non-scientific, utterly politicized "science-fact" that is patently false, punitive business taxation at every turn, an array of judicial fines of unimaginable scope and complexity, and, last but not least, American unionization strictures that serve to actually slay job creation and hobble all such manufacturing endeavors in America before they can get off the ground. Globalism emerged, they tell us, as the needed answer to American hubris and an unholy American drive to excel. Unless one is buried under mounds of political propaganda, it's easy to see the absurdity of labeling the employees of SpaceX, for instance, as "unskilled labor"... Etc. ad infinitum. At one time in the recent past, American manufacturing prowess was the envy of the world in a wide variety of technical fields! The current federal and state government roadblocks against America becoming competitive globally in tech manufacturing are considerable, it's true, as anyone with a working brain knows. But remarkably, that is only half the story! The other half of the story is, of course, the corporations themselves... Chinese tech manufacturing is simply unassailable in terms of profits, because the Chinese government wants to see its tech manufacturing second-to-none globally so that no companies/nations can compete in terms of ROI, and China has completely succeeded in that goal. Let's tic-off a few things: *Chinese tariff policies are set according to what is considered best for Chinese business, Chinese employees, and the Chinese people. Huge difference with how things are done with tariffs in the US--as the US government (SCOTUS in this case, Congress in others) plainly feels that tariffs are "unfair" for the limited number of citizens who may pay them, whereas nothing is "unfair" when Congress considers the Personal Income Tax rates to be infinitely hike-able, along with infinitely enlarging annual budget deficits. *The Chinese government boldly subsidizes Chinese companies to artificially amplify their profits. *The Chinese government deliberately refuses to avidly demonize Chinese businesses and does not consider Chinese businesses "the enemy", so very unlike American (D)s these days. *Chinese labor laws and businesses are allowed to set their own labor policies according to what Chinese companies consider is best for companies and their employees... Simply put, American workers in tech manufacturing are not allowed to set their own labor policies! * One additional problem corporations have that I also do not sympathize with is they don't want to pay to train their American employees. They could easily do so, but would rather not have to pay for it. I find that pathetic, actually. It is the height of hypocrisy for Americans to decry working conditions in China while simultaneously ensuring that American products are manufactured in China, not in the US, simply to maximize profits. There is nothing wrong with making a profit, of course, absolutely nothing. But there is plenty wrong with attempts to normalize hypocrisy of this kind! But rank hypocrisy and the (D) party in the US are longtime bedfellows... The current government in Washington is working overtime to see if it can toss out the horribly poor, failed economic policies of the past, while the (D)s still in Washington work very hard to bring back the stupidity whenever possible. With the right policies in place, America can be an infinitely competitive manufacturer.
  • Recent Achievements

    • Conversation Starter
      jessse3334 earned a badge
      Conversation Starter
    • Reacting Well
      JuvenileDelinquent earned a badge
      Reacting Well
    • One Month Later
      Excellence2025 earned a badge
      One Month Later
    • Week One Done
      Excellence2025 earned a badge
      Week One Done
    • Week One Done
      flexorcist earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      508
    2. 2
      +Edouard
      198
    3. 3
      PsYcHoKiLLa
      152
    4. 4
      Steven P.
      73
    5. 5
      FloatingFatMan
      62
  • Tell a friend

    Love Neowin? Tell a friend!