Getting toast out with a knife or fork, Dangerous?


Recommended Posts

Ok,

Its Friday afternoon and im kinda bored so i was watching some weird Ozzie ad i saw on reddit about dumb ways to die. One of them mentioned was getting your toast out with a fork.

So i got to wondering just how bad it is?

Now, I appreciate that when the toast is cooking and the elements are on that this would be a very dumb idea, so we can just assume that if you do that then you deserve what you get.

However, most folks fish out their toast with a fork or a knife (which we'll assume is all metal) AFTER the cooking is done and the element is off, then, is it so bad, is there still a risk?

Also, we'll assume here were all too lazy to turn off or pull out the plug.

Any electricians or accidental self shockers out there who can testify?

It "can" happen, a toaster works by sending an electric current through metal coils which heat up. It "could" still send a current while it's off, if the wiring is done incorrectly.

That said, it's pretty unlikely. Personally I just jiggle the toaster until the toast pops out.

If it's plugged in, but not turned on, there is a very low chance of getting shocked. If you do, the toaster is faulty. If it's on, then yeah it's really really easy to get shocked. The current coming out of a wall socket will vary rarely kill somebody, unless they are really unlucky. Your skin is thick enough to protect you from that.

My toaster has a popup feature. It raises the highest of the toast so you can easily grab it with your fingers.

But resulting with the old method I sometimes still use a fork to pierce the toast with a knife.

Just keep in mind that electricity is 'invisible'...its not the volts that generally kill people..its the amperage (voltage burns...amperage kills). 0.5 amps is enough to stop a heart...most US house circuits are on 15/20 amp breakers. There is always the possiblity of a defective 'element' that doesn't glow because its lack of voltage...but does complete a circuit that could still carry 'amperage'. The only way to safely ensure it doesn't have current is to 'unplug' it from its source.

The most general part of electricity is it takes the least path of resistance to ground...if your not grounded you're pretty much just going to get 'high dose of tingle.. :laugh: )...but if your hand is energized and your foot is grounded...you might end up with a hole in your foot or blownout toes.

Do what I do. Drop the lever just before it locks down, then slingshot it up. Toast comes flying in the air, then catch it in mid-air. :)

I do that as well.

"Most people" use a knife or fork to get toast out of their toasters? What kind of crappy toasters do you guys have that requires that?

Indeed. That's an odd thing to have said...since most people I know don't do that.

unpluging it would remove the risk of electricution.

even if the toast has sprung up, most toasters heat element is activated by the mechanism being pushed down into a certain position.

Now, getting toast out with a knife would mean that the toast is stuck, so the mechanism would still be movable, so in the worst case that the toasters mechanism was right down and you put in something metal to take it out you could push it down enough for it to power the heating elements on.

being a heating element it will be a resistor of electricity, so when you put in a knife which will be a much better conductor of electricity, if YOUR grounded you will probably get shocked pretty bad, enough to kill.

ha haaa memories...i haven't gotten shocked yet doing that...although it's been a few years since i've eaten toast...this is coming from a guy who used to stick copper pipe in the light socket and pull the cord. Thank you for the memories OP! have fun with that toaster!!!! :):)

just unplug it and rock and roll!

The only way to safely ensure it doesn't have current is to 'unplug' it from its source.

Happens more often then not. Just unplug it if your scared.

At least a few people here have common sense.

I lived with a crazy girl for a few weeks, she was a friend, but after about 3 days of living there I became the babysitter :/

Anyhoo.... one day I was not the babysitter, her and her mother were looking after her 2 yr old daughter, I walked into the kitchen to get a drink, and up on a chair, with a completely metal butter knife, was her daughter stabbing the elements of a hot / live toaster !

I think I still have damaged ligaments from the speed I moved to grab her arm from the next 240v swipe, took her in to her mother and said what I caught her doing, the most I got was a raised eyebrow...

I left not long after

I have a toaster with a rack... I wouldn't touch the rack with my hand because it's hot when it is in use. I use the fork to slide the toasts out of the rack and onto the plate. I used to have a pop-up toaster a long time ago so I don't have it anymore...

I haven't gotten shocked by it since I use it.

Or you can make toasts by using your big oven which it's easy to reach.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Why it's almost impossible to produce a smartphone in the United States by Hamid Ganji If you look at the back of some Apple products, you can see the famous phrase “Designed by Apple in California, Assembled in China.” This phrase appears on products from one of the largest smartphone brands in the United States. These products are designed in the U.S., but their manufacturing takes place in China, India, Vietnam, or even Brazil. But why can’t Apple, as one of the largest American tech companies, produce its iPhones on U.S. soil? The idea for this topic came to me after the Trump Foundation launched a smartphone called the T1 and claimed that it was designed and built with American values in mind. However, this claim did not last long, as it was revealed that Trump’s phone was actually a rebranded HTC U24 Pro, with only a gold case and minor internal component changes. You see? Even a phone that is supposed to represent American values is manufactured in China. With a gross domestic product (GDP) exceeding $32 trillion, the United States is currently the world’s largest economy, while China ranks second with around $20 trillion. On the other hand, the United States is by a wide margin the global leader in various technological fields, and American companies spend hundreds of billions of dollars annually on research and development. From Apple and Google to Microsoft, Lockheed Martin, Boeing, and others, American tech and industrial giants lead their foreign competitors in many sectors. The United States also has no shortage of smartphone brands. Apple, Google, and Motorola are among the major brands in the smartphone market, collectively holding a significant share. However, the vast majority of their products are manufactured outside the United States. So why is it that the world’s largest economy, home to the most advanced technology companies and industrial powers, cannot produce a smartphone on its own soil? Let’s explore this question together. Even threats to impose tariffs won’t work After Trump entered the White House as the 47th President of the United States, his administration adopted strict tariff policies. One of these policies was the imposition of a 25% tariff on smartphones manufactured outside the United States. Trump said he “had a little problem” with Apple CEO Tim Cook over producing smartphones outside the U.S. So he thought that threatening a 25% tax on imported phones might force Apple to bring manufacturing back to the United States. “I have long ago informed Tim Cook of Apple that I expect their iPhones that will be sold in the United States of America will be manufactured and built in the United States, not India, or anyplace else,” Trump wrote on Truth Social. Image via The White House Although Apple currently manufactures some of the iPhone’s chips in the United States with TSMC's help, it still shows no willingness to shift full iPhone production to the country. At the time, renowned Apple supply chain analyst Ming-Chi Kuo wrote on X, “In terms of profitability, it’s way better for Apple to take the hit of a 25% tariff on iPhones sold in the US market than to move iPhone assembly lines back to the US.” However, manufacturing a smartphone in the United States is not as easy as it might seem, and many technical and economic barriers are involved. The lack of necessary manufacturing hubs There is a clear reason why many companies prefer to manufacture their products in China. China has established itself as the main global manufacturing hub for international companies, and over the past few decades, large contract manufacturers have emerged there, allowing companies like Apple to outsource production. One such example is Foxconn, which also manufactures some Apple products in India. Building the infrastructure required to produce smartphones in the United States would require tens of billions of dollars in new investment. Factories would need to be built, essential manufacturing equipment would have to be installed, and, most importantly, a skilled workforce capable of operating these systems would need to be recruited and trained. The United States currently lacks the core infrastructure needed to manufacture smartphones, and for this reason, many companies prefer to outsource production to Chinese contractors rather than spend tens of billions of dollars to build that infrastructure, which is significantly more economically efficient. Additionally, building such infrastructure in the United States could take up to a decade, ultimately leading to a significant increase in the product's final price for consumers. Shortage of trained labor in the U.S. compared to China Decades of serving as a global manufacturing hub have allowed China to build a massive talent pool in the production sector that is almost unmatched worldwide. Today, if a company chooses to manufacture its products in China, it can be confident that the workers involved in production have years of experience in their respective roles and are capable of producing high-quality goods with minimal errors. Even if we assume that tens of billions of dollars were invested in building smartphone manufacturing infrastructure in the United States, finding skilled workers would remain highly challenging. Apple CEO Tim Cook visiting the iPhone 6 assembly line in China in 2014. Image: Tim Cook on X In a 2015 interview on CBS’s 60 Minutes, Tim Cook said the main reason Apple isn’t producing in the US is a lack of skills. "China put an enormous focus on manufacturing, in what you and I would call vocational kind of skills. The US over time began to stop having as many vocational kinds of skills. I mean you could take every tool and die maker in the United States and probably put them in the room that we're currently sitting in. In China you would have to have multiple football fields,” Cook said. Also, in 2017, at the Fortune Global Forum in Guangzhou, Cook once again emphasized the importance of highly skilled Chinese workers. “China has moved into very advanced manufacturing, so you find in China the intersection of craftsman kind of skill, and sophisticated robotics and the computer science world. That intersection, which is very rare to find anywhere, that kind of skill, is very important to our business because of the precision and quality level that we like. The thing that most people focus on if they’re a foreigner coming to China is the size of the market, and obviously, it’s the biggest market in the world in so many areas. But for us, the number one attraction is the quality of the people,” Apple CEO said. Higher labor costs in the United States Producing almost any product in the United States is more expensive than in many other countries, and one of the main reasons is the higher cost of labor in the U.S. According to the Bureau of Labor Statistics, median weekly earnings of full-time workers in the United States were $1,235 in the first quarter of 2026. Meanwhile, the average annual salary in China's private sector in 2025 was RMB 71,590 (US$9,961). In many parts of the world, the weekly wage of an American worker is equivalent to several months of income. Another important factor to consider is that in the United States, the workforce capable of working on a smartphone assembly line is highly specialized and therefore commands higher-than-average wages. According to an estimate by Bank of America, producing an iPhone in the U.S. is technically possible, but “iPhone cost can increase 25% purely on higher labor cost in the U.S.” However, this 25% increase applies only if final assembly is performed in the United States while components are still sourced from China or elsewhere. In this case, the price of a base iPhone would rise from $799 to around $1,000. But in another scenario, if Apple were to produce the required components for the iPhone within the United States, production costs could increase by more than 90%. Trump’s dream for a “Made in the USA” iPhone might never come true In a free-market capitalist economy, one of the primary responsibilities of any CEO is to maximize profit. Using Apple as an example, Tim Cook’s role is to maximize the company’s profits so that it can fund research and development for new products and invest in areas such as artificial intelligence, while also keeping shareholders satisfied. Therefore, it is entirely understandable that Apple would choose not to bring its manufacturing back to the United States and instead keep production in countries where labor is cheaper, and products can be manufactured at a lower cost, thereby maximizing its profit margins. What is your opinion about manufacturing smartphones in the United States? If you are an American citizen, would you be willing to pay hundreds of dollars more for a smartphone made domestically in the USA? Let us know in the comments.
    • Cheers everyone for the replies. It's been very useful. 👍
    • Compared to the 7735HS it is around 25-30% slower in multi-threaded tasks (according to Google search) I did a review of the 7735HS Beelink SER6 Max in 2023, but thinking about it, it's not comparable to the 7730U. For the example you gave about how it will be used, the 7730U is actually an excellent choice for its power and battery efficiency.
  • Recent Achievements

    • Reacting Well
      JuvenileDelinquent earned a badge
      Reacting Well
    • One Month Later
      Excellence2025 earned a badge
      One Month Later
    • Week One Done
      Excellence2025 earned a badge
      Week One Done
    • Week One Done
      flexorcist earned a badge
      Week One Done
    • Week One Done
      Woland13 earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      503
    2. 2
      +Edouard
      194
    3. 3
      PsYcHoKiLLa
      151
    4. 4
      Steven P.
      72
    5. 5
      FloatingFatMan
      67
  • Tell a friend

    Love Neowin? Tell a friend!