How to bypass prerequisites checks using orca


Recommended Posts

  On 23/11/2012 at 00:43, Muzzy said:

I mean with orca I want to get it going if I break the system then so be it as I said it my secondary one that I use to play around with .

can someone please tell me how to edit it with orca I mean which table and command to use

you CANT, and there is no "if" it breaks your system

it's pretty much guaranteed that if you managed to force it to install it WOULD break the system

i can't understand on why you insist on forcing this to install. there's nothing to learn when the outcome is a given

  On 23/11/2012 at 00:49, Brando212 said:

you CANT, and there is no "if" it breaks your system

it's pretty much guaranteed that if you managed to force it to install it WOULD break the system

i can't understand on why you insist on forcing this to install. there's nothing to learn when the outcome is a given

not to be rude but what do you care if I break my system or not .

If you don't know just admit it rather than acting like you know but u wont say. There is not shame in not knowing.

This is a forum where people ask questions and try to get answers not just "you will break your system".

I want to try so let me.

if you know the answer please give it to me otherwise if you don't know or just don't wish to help better you don't reply at all.

for the record I have tried 2009 and it installs and works fine that did not break anything so why would 2007. its just software.

so please either give me the answer I am looking for or don't bother replying.

  On 23/11/2012 at 01:50, Muzzy said:

for the record I have tried 2009 and it installs and works fine that did not break anything so why would 2007. its just software.

Especially in the realm of antivirus software, there are certain APIs (like on the kernel level) that work perfectly fine in one OS but then are depreciated, heavily modified, or even removed in the next one.

It's been, what, 5 years since 2007, and two new versions of Windows have been launched in that time (which is enough time for a feature to be depreciated and then removed). It's almost like asking why I can't run Windows Internet Explorer 10 on OSX; from the software's point of view it might as well be running on a ternary system :p

It's just that some (many) of the people here feel it's a waste of time to try installing an unsupported piece of software on an OS that's been pretty much completely reworked since its release, especially if you have easy access to a supported version of the software. Is there a reason you want to do this, or just for curiosity?

and since you requested some kind of guidance, a quick search brought up: http://www.microsoft...07-t165466.html

Why would you use an outdated software with an outdated scan engine that would have problems detecting any new viruses or malware out there? Even if you could install it, you should not trust it any more than you running without protection. think of it this way, would you take expired meds or eat food that expired 5 years ago?

I personally would not try to do this. There is no reason for this. If you were trying to run a specific database program from 98 that they stopped making that year it would be one thing. But trying to get a security app to work when they have updated it and have many current ones it really makes no sense to do anything other than run a current one.

If you ask a stupid question, people are going to point it out. Don't try and hide behind the "I'm just asking what do you care".. Cause most people that say that really mean is I just wanna do it, and then I'm gonna be back in a month bitching because my computer is unstable and not working right.

If you want to break your computer, delete the System32 folder.. other than that, most have no interest in helping you doing something that is stupid.. you wanna be able to do it, figure it out yourself, since you keep saying that this is about You just being able to do it..

  On 23/11/2012 at 01:50, Muzzy said:

so please either give me the answer I am looking for or don't bother replying.

there is no answer. you're trying to jam a square object into a round hole. there's literally no point
  • Like 1

What type of file is the Norton installation file?

As far as I'm aware, Windows Installer does not support prerequisites in a "proper" manner, and the only way to embed prerequisites into an MSI would be to store them in a Binary table. That's just storing them in there; running them requires a Custom Action and other stuff. For that reason, among others, people usually opt for using a bootstrapper (often in the form of an EXE file), which first runs the prerequisite installations and then runs the main product installation. It seems you have got hold of an MSI, so I'm wondering, was this MSI extracted from an initial EXE file, or is the whole installation process for the 2007 version of Norton contained in an MSI file? The answer to this question is important because if the MSI file is extracted from an EXE file, the prerequisites and the logic for running them probably isn't in the MSI file.

  On 23/11/2012 at 03:01, Calum said:

What type of file is the Norton installation file?

As far as I'm aware, Windows Installer does not support prerequisites in a "proper" manner, and the only way to embed prerequisites into an MSI would be to store them in a Binary table. That's just storing them in there; running them requires a Custom Action and other stuff. For that reason, among others, people usually opt for using a bootstrapper (often in the form of an EXE file), which first runs the prerequisite installations and then runs the main product installation. It seems you have got hold of an MSI, so I'm wondering, was this MSI extracted from an initial EXE file, or is the whole installation process for the 2007 version of Norton contained in an MSI file? The answer to this question is important because if the MSI file is extracted from an EXE file, the prerequisites and the logic for running them probably isn't in the MSI file.

u are right it it is off an iso that I extracted which has an exe and then other setup folder with a setup msi file it must be the setup exe that I have to edit but orca will not open it as it is not an msi file.

the only thing I have to bypass is Microsoft installer check but that must be in the exe and I cant get into it. is there a way?

  On 24/11/2012 at 01:20, Muzzy said:

u are right it it is off an iso that I extracted which has an exe and then other setup folder with a setup msi file it must be the setup exe that I have to edit but orca will not open it as it is not an msi file.

the only thing I have to bypass is Microsoft installer check but that must be in the exe and I cant get into it. is there a way?

have you tried setting the compatibility settings to Win7/XP? If that doesn't work, then I'd have to assume that it's a problem unrelated to the windows version.

On top of that, are you editing the MSI file and then launching it from the EXE, or are you just launching the MSI directly? the EXE could be unpackaging some important stuff that it needs.

If it really does work flawlessly in Win7, then you might be able to code up some kind of wrapper that will tell the exe that it's running in 7.

But even if that works (and I know you don't want to hear this) there is a near 100% chance that (best case) it's either not going to work, or (worst case) it's going to completely screw up your computer at the kernel level.

It really does work flawlessly on win7 and you are right am trying to edit the msi file and then launching it from exe but it doesnt work its the exe i need to edit. What sort of wrapper to you suggest and which program would u believe could edit the exe in this manner. Is it also possible to delete that exe and make a new one if the wrapper doesnt work

  On 24/11/2012 at 13:13, Muzzy said:

It really does work flawlessly on win7 and you are right am trying to edit the msi file and then launching it from exe but it doesnt work its the exe i need to edit. What sort of wrapper to you suggest and which program would u believe could edit the exe in this manner. Is it also possible to delete that exe and make a new one if the wrapper doesnt work

Are you attempting to launch the .msi on it's own, or via a setup.exe?

  On 24/11/2012 at 14:42, Muzzy said:

It will not allow me to launch msi by itself it says it must be launched from exe unless there is something i can edit in msi so it does not require exe

that might be something to look around for in Orca. a quick way to do this (if I remember correctly) would be to take the exact error message it gives you and then search for it in Orca (and if that doesn't come up with anything, make your search less and less specific, like start with "Error 29318: You Must Install from the Setup.exe File" then try just "Error 29318" and then just "29318"). Do you think you could somehow upload the msi file for us to take a look, or is it paid-for software?

  • 2 weeks later...
  On 24/11/2012 at 17:45, Matthew_Thepc said:

that might be something to look around for in Orca. a quick way to do this (if I remember correctly) would be to take the exact error message it gives you and then search for it in Orca (and if that doesn't come up with anything, make your search less and less specific, like start with "Error 29318: You Must Install from the Setup.exe File" then try just "Error 29318" and then just "29318"). Do you think you could somehow upload the msi file for us to take a look, or is it paid-for software?

I tried uploading the files with no success. I compressed them as rar file size 1.79mb and it would not allow me to upload so then I tried changing the extension to bmp and uploaded files separately so there are 2 files one msi and one exe and the upload worked.

Once you download them please change extension back to rar and then extract the files from each one.

There should be an exe file and an msi file also.

Any advice on how to remove or bypass the installer check would be great.

Just so you know when I was installing it on windows 7 ultimate x64 it was in compatibility mode for vista and yes I was running it as administrator

thnx again :)

p.s. The error is right at the beginning it says the following

Setup cannot be installed because there was a problem authenticating your Microsoft Windows Installer

Setup.bmpFetching info...

SymSetup.bmpFetching info...

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Looks less buggy than FC25. I still don't understand how they managed to release that game.
    • Yes, Command Palette, that's what I meant, thank you.
    • PowerToys Run has already been replaced with Command Palette. Run is still functional, but it's just a matter of time before Microsoft disables it. Raycast can do much more though, and with its plugins much, much, much more...
    • Snagit 2025.2.1 by Razvan Serea Snagit is the most complete screen capture utility available. Showing someone exactly what you see on your screen is sometimes the quickest and clearest way to communicate. With Snagit, you can select anything on your screen – an area, image, article, Web page, or error message – and capture it. Then, save the screen capture to a file, send it to Snagit​'s editor to add professional effects, share it by e-mail, or drop it into PowerPoint®, Word®, or another favorite application. Capture and share images, text or video from your PC. Create beautiful presentations, flawless documentation and quickly save online content. The latest version of Snagit offers a totally new interface and workflow - making SnagIt easier for beginners to use, while still providing maximum convenience and flexibility for the screen capture experts. Snagit 2025.2.1 fixes: Fixed an issue where tags applied to images might not save correctly. Fixed a crash that might occur when closing the Editor. Download: Snagit 64-bit | 419.0 MB (Shareware) Links: SnagIt Home Page | Release Notes Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Microsoft 365 Copilot Chat now rolling out to Government Community Cloud (GCC) tenants by Paul Hill Microsoft has announced that Microsoft 365 Copilot Chat is now rolling out to Government Community Cloud (GCC) tenants. This will allow affected users to experience AI-powered chat experience in Microsoft 365 apps, while meeting US government cloud requirements. Admins will also get the tools they need to manage access, security, and compliance at scale. Since June, Microsoft has also been rolling out Web Chat access for Copilot users since early June and that’s expected to be completed by the end of the month. The rollout announced today will also bring Copilot Chat to Microsoft 365 Copilot app (web), Outlook (web and desktop), and Microsoft Teams (web and desktop). The Redmond giant said that these features are included at no additional cost with eligible Microsoft 365 and Office 365 licenses (F1, F3, G3, and G5). It also pointed out that this rollout doesn’t include AI Agent functionality; that rollout will be announced in the future. If you have used artificial intelligence chatbots like ChatGPT or Google Gemini, you’ll have probably noticed that it scours the web for up-to-date information. By default, this “web grounding” is off in GCC with Copilot Chat. If administrators want to allow it, they can explicitly enable the “Allow web search in Copilot” Cloud Policy - the exception is if the policy was already enabled in your environment, in that case your existing configuration will be followed. Microsoft says admins will also have granular controls over the AI in Microsoft 365 Copilot app, Outlook, Teams, and Web. If you’re an administrator of a GCC environment, you can check out the How to prepare section of the announcement to learn about reviewing your admin settings, educating users about how to use the AI, and monitoring the rollout. The usage of AI in government holds significant potential as shown by a recent study by the UK government. It found that AI helped to save civil servants 2 weeks, per person, per year. This time can be spent by them doing other productive activities, making government more efficient overall. With Microsoft's rollout of Copilot Chat to GCC, US government workers can be more efficient too.
  • Recent Achievements

    • Conversation Starter
      Kavin25 earned a badge
      Conversation Starter
    • One Month Later
      Leonard grant earned a badge
      One Month Later
    • Week One Done
      pcdoctorsnet earned a badge
      Week One Done
    • Rising Star
      Phillip0web went up a rank
      Rising Star
    • One Month Later
      Epaminombas earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      529
    2. 2
      ATLien_0
      205
    3. 3
      +FloatingFatMan
      168
    4. 4
      Michael Scrip
      150
    5. 5
      snowy owl
      126
  • Tell a friend

    Love Neowin? Tell a friend!