Will it be useful to have a dual band router? Any tools to test the router?


Recommended Posts

In my home, I have a Wimax ADSL connection. The router connects to the net through a modem (IDU). I just read about dual band routers. It seems to be they are useful when the router is connecting to the net through internet. In my home, only about 1 to 2 devices connect through Wifi. Other devices use cables. So my question is, will it be pointless to have a dual band router in my setup?

The second question is, is there any good tools to test my router. To make sure its working in top shape?

1 or 2 devices, not a lot of point for dual band then if you ask me. Do your devices support both 2.4 and 5ghz? If at least one of them does not support 5ghz, then again pointless for dual band.

Also keep in mind there are 2 kinds of dual band, ones that can be switched from 2.4 to 5 and others that can do simultaneous both bands.

There is a slight chance that if all your devices can use the 5ghz range that you could switch to it to avoid interference in the 2.4 ghz range. Microwaves, portable telephones, other peoples wifi, streaming devices, wireless keyboards and mice are often in the 2.4ghz range. Dual band can help here. You could also get a newer AC router and use both bands at the same time. However most devices only work in the 2.4 ghz range. I dedicate two of my devices in the 5ghz and rest use 2.4 in my house. I do some of my streaming over the 5ghz as it is cleaner and performs better for video streams then the relative dirty 2.4 GHZ

Remember, that is all theroretical, your actual performance and speed may vary as we don't know what other factors may influence the speed.

One last thing to consider depending where you are physically located some Wimax freqs are very close to the 2.4 GHZ and use 2.5 in this case using a 5 GHZ router if all your deviecs can use it could increase not only your internal but reduce interference on the Wimax signal itself. Check wikipedia or your provider to see what freq it uses.

Can be useful if you have 5GHz devices, and devices that support only 2.4GHz.

In my case, I have the iPhone, the Wii and the PS3 using the 2.4GHz band, and my laptop and fiancee?s laptop are connected to the 5GHz band.

If you have an android phone, this is a nice free app to detect wifi access points, and how strong they are.

https://play.google....c.wifi.analyzer

I've used it to make sure I have my wifi access on the least used broadcast channel's then my neighbor's.

If you have an android phone, this is a nice free app to detect wifi access points, and how strong they are.

https://play.google....c.wifi.analyzer

I've used it to make sure I have my wifi access on the least used broadcast channel's then my neighbor's.

I was going to suggest a similar tool.

How many wifi networks are in the area? 5ghz is less congested then 2.4. Also dual band routers usually have better cpu's in them so that if you upgrade your internet connection the router will be able to keep up.

1 or 2 devices, not a lot of point for dual band then if you ask me. Do your devices support both 2.4 and 5ghz? If at least one of them does not support 5ghz, then again pointless for dual band.

Also keep in mind there are 2 kinds of dual band, ones that can be switched from 2.4 to 5 and others that can do simultaneous both bands.

Check out my Sig!!! Dual Channel Dual Band Extreme Coverage!!!! FTW!!!!

Essentially my router has two signals per Band at a amplified strength. So yes I found it makes a big difference overall. I easily connect multiple devices at one time and experience no lag or slow down. I only have one device that does 2.4ghz only. I put the others on 5ghz. Any guest that comes over is on the 2.4ghz. Which all of them do 300mb/s anyway. At least my laptops see the two channels and recieve on both at the some time. The USB file sharing is like having another network drive.

To answer the OP's question: YES. Dual Channel makes it better even if your devices are only on 2.4ghz. The added benefit is that later if you get 5ghz capable devices you can have them on that as well and dual channel. The upside of the file sharing can be very helpful.

This topic is now closed to further replies.
  • Posts

    • 0 chance of that happening, forget it. Get it installed by some tech guy or do it yourself with the bypasses, that's how MS is being lenient and looking the other way to give users a chance.
    • Ooooooh, now we got the big tech corps fighting
    • Segra 1.6.3 by Razvan Serea Segra is a free, open-source OBS-powered game recorder offering fast gameplay capture, instant clips, AI highlights, deep game integration, and seamless uploads—perfect for gamers, streamers, and content creators. Lightweight, fast, zero bloat. Segra key features: Automatic Game Recording: Begin capturing gameplay the moment your game launches, with zero manual setup. Instant Clipping: Save important moments instantly using a customizable hotkey—perfect for highlights, montages, or quick shares. Segra AI Highlights: Let Segra automatically detect kills, assists, deaths, and key events to generate polished highlight reels without manual editing. Gameplay Uploads: Upload recordings and clips directly to Segra.tv for fast sharing and cloud access. Deep Game Integration: Enjoy advanced game-data tracking across hundreds of supported titles, enabling smart highlight generation and stat-informed clipping. High-Performance Capture: Record up to 4K at 144 FPS using OBS-powered technology with minimal performance impact, supporting NVENC, AMD VCE, and custom quality controls. Segra Editor: Edit recordings easily with timeline controls, segment management, and event-based navigation to build the perfect clip. Customization Options: Adjust hotkeys, output formats, storage paths, codecs, capture quality, and performance settings for a tailored recording experience. Segra 1.6.3 changelog: Recording: Reworked the whitelist/blacklist into per-game recording with individual setting overrides. Settings: Added Windows Game Mode and Startup window mode options. Audio: Improved noise suppression for microphone capture. Clips: Added a separate export mode for segment clips. Updates: Fixed pending update state not showing by replaying it when the frontend reconnects. Recording: Fixed an issue where audio could break or sources could linger between recordings. Stability: Fixed a rare crash that could happen when a game closed. Settings: Fixed settings not applying correctly on some non-English systems. Download: Segra 1.6.3 | 74.5 MB (Open Source) View: Segra Homepage | Github | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • So, recently, I saw on the news (yes, on this website) that Samsung is introducing features where it can provide education using AI-powered sets, and because of this, I got concerned about whether the AI gives out wrong info during education sessions, causing controversies in the process. What are your thoughts on this? 
    • TCL's Bang & Olufsen soundbar is 40% off on Amazon by Ivan Jenic The TCL Design Series A65K is currently $299.99, down from $499.99. That's 40% off and $200 saved on a soundbar tuned by Bang & Olufsen, which is not a combination you'd normally expect at this price point (purchase link below). Bang & Olufsen doesn't typically show up in the sub-$500 category. The Danish audio brand is known for speakers that cost several times more, so having their acoustic tuning on a $300 soundbar is very appealing. TCL handles the hardware, B&O handles the sound engineering, and the result is what the company calls "accessible luxury." Still, accessible luxury isn’t full-fledged luxury, so don’t expect wonders. But this is a decent soundbar, nevertheless. The A65K is a true 3.1.2 channel system with nine physical drivers, including genuine up-firing height speakers for Dolby Atmos and DTS:X. Many soundbars at this price simulate overhead effects through virtual processing, rather than actual hardware. So, you’re getting the real deal. The design is unusually slim for a system with Atmos compatibility. The bar is just under 2 inches deep and should fit beneath most TV screens. The wireless subwoofer is also compact at roughly 14 x 14 x 5 inches. Total output is 460W, and you can connect to the soundbar via HDMI eARC, Bluetooth 5.3, or USB. There are also eight sound modes through the TCL Home app and an AI calibration capability. Although it’s worth mentioning that AI capabilities in most of these devices are inconsistent, to say the least, and that shouldn’t be the biggest selling point. Still, at $299.99, the A65K is a strong buy for anyone who wants a soundbar that sounds and looks noticeably better than what this price range usually offers. And the Bang & Olufsen branding surely sounds nice - pun intended. TCL Design Series Bang & Olufsen A65K - $299.99 | 40% off on Amazon Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
  • Recent Achievements

    • Apprentice
      jahara21 went up a rank
      Apprentice
    • Reacting Well
      NovaEdgeX earned a badge
      Reacting Well
    • Week One Done
      NovaEdgeX earned a badge
      Week One Done
    • One Year In
      BA the Curmudgeon earned a badge
      One Year In
    • Conversation Starter
      rosiecharles earned a badge
      Conversation Starter
  • Popular Contributors

    1. 1
      +primortal
      529
    2. 2
      +Edouard
      263
    3. 3
      PsYcHoKiLLa
      148
    4. 4
      Steven P.
      96
    5. 5
      macoman
      59
  • Tell a friend

    Love Neowin? Tell a friend!