My SSD Only Supports 500MB's Read and 175 MB's Write!


Recommended Posts

You guy's gave me he** for using my 128 GB M4 SSD Externally. Well I just wanted to let you guys know that my SSD only support's 500 MB's a Second Read and 175 MB's a Second Write! It is indeed designed to be used Externally, NOT Internally as USB 2.0 Supports 480 MB's a Second! Just FYI!

actually USB2 supports 480Mb not MB (which is 35MB per second) ;) USB3 isn't bad at 5Gbits or 625 MB a second

An SSD on USB 2? Err... wha...

Some SSD's had USB ports on them... gawd knows why they thought this was a good idea, but some had them...

Some SSD's had USB ports on them... gawd knows why they thought this was a good idea, but some had them...

I can only guesstimate that it would have been for a drive recovery scenario where you were temporarily connecting it to access some of the data. But I concur that makes no sense...

To actually place an SSD on USB 2 as an external primarily is grossly a waste of money. Even the slowest HDD would handle that scenario just fine.

It is indeed designed to be used Externally, NOT Internally as USB 2.0 Supports 480 MB's a Second! Just FYI!

No.

"USB 2.0: Released in April 2000. Added higher maximum signaling rate of 480 Mbit/s (effective throughput up to 35 MB/s or 280 MBit/s)"

actually USB2 supports 480Mb not MB (which is 35MB per second) ;) USB3 isn't bad at 5Gbits or 625 MB a second

Some SSD's had USB ports on them... gawd knows why they thought this was a good idea, but some had them...

An M4 would be a "bare" drive.

I've reread the OP's post about 10 times and still can't real decipher it. :s

I can only guesstimate that it would have been for a drive recovery scenario where you were temporarily connecting it to access some of the data. But I concur that makes no sense...

To actually place an SSD on USB 2 as an external primarily is grossly a waste of money. Even the slowest HDD would handle that scenario just fine.

If you ever figure out their reasoning let me know *lol* I always thought why?... only thing I could think was for easy mirroring of a hard drive to the SSD via USB but that's still a dumb idea if you understand the difference between storage on SSD and HDD's like 512 vs 4k sectors and how mirroring one to the other is kinda an ehh idea to do..

An M4 would be a "bare" drive.

I've reread the OP's post about 10 times and still can't real decipher it. :s

ah, didn't look up that specific drive, was just going by past experience with ssd's sometimes having mini usb ports

An M4 would be a "bare" drive.

I've reread the OP's post about 10 times and still can't real decipher it. :s

He got an internal SSD with a USB cable, thought it was external (I guess because SSDs look like they come in a case compared to a spinny drive), plugged it in via USB 2, apparently thinks it's now running at nearly full speed. :laugh:

I assume it's just sitting on his desk too, which I suppose isn't the worst with an SSD, but it just adds to the ridiculousness.

If you ever figure out their reasoning let me know *lol* I always thought why?... only thing I could think was for easy mirroring of a hard drive to the SSD via USB but that's still a dumb idea if you understand the difference between storage on SSD and HDD's like 512 vs 4k sectors and how mirroring one to the other is kinda an ehh idea to do..

They're cheaper than a flash drive, and slightly more durable than a portable disk drive. I guess there's that. Makes more sense if you have USB 3.0 anyway.

and once again kevpan, you didn't listen to us, only yelled at everyone that was trying to correct you

the ssd you got IS an internal drive. the cord is only for you to easily clone your old internal over to the new drive before putting the new one in

we even linked you to some instructions on how to easily do it all but you chose to ignore us and just attack everyone trying to help you

He got an internal SSD with a USB cable, thought it was external (I guess because SSDs look like they come in a case compared to a spinny drive), plugged it in via USB 2, apparently thinks it's now running at nearly full speed. :laugh:

I assume it's just sitting on his desk too, which I suppose isn't the worst with an SSD, but it just adds to the ridiculousness.

Interesting. If that's the case, there is NO way that he would be getting anywhere near the 500MB/s that he stated. Even 50MB/s would be stretch. :rofl:

WRONG! IT IS GETTING ALMOST FULL SPEED AS IT IS GETTING 480 MB'S A SECOND OUT OFF 500 MB'S A SECOND!

I EVEN PLAYED STAR TREK D-A-C (FROM THE MAC APP STORE) YESTERDAY AND HAD NO PROBLEMS WHATSOEVER!

I can only guesstimate that it would have been for a drive recovery scenario where you were temporarily connecting it to access some of the data. But I concur that makes no sense...

To actually place an SSD on USB 2 as an external primarily is grossly a waste of money. Even the slowest HDD would handle that scenario just fine.

Yup. I personally use a hybrid drive externally. But i use it on eSata as using it on USB 2 would make no sense at all.

Folks, he has admitted on his own that he has mental problems. Feeding into it only makes it worse for him and everyone else.

Sometimes he literally cannot help the fact that he won't listen and gets agitated.

WRONG! IT IS GETTING ALMOST FULL SPEED AS IT IS GETTING 480 MB'S A SECOND OUT OFF 500 MB'S A SECOND!

I EVEN PLAYED STAR TREK D-A-C (FROM THE MAC APP STORE) YESTERDAY AND HAD NO PROBLEMS WHATSOEVER!

Kevin, this is a case where you are wrong. Don't make things worse on yourself by arguing with people who know what they are talking about.

You and I have had this type of discussion many times over the last several years.

Walk away and do the proper research when you're well, not when you're sick and cannot judge things well, ok?

WRONG! IT IS GETTING ALMOST FULL SPEED AS IT IS GETTING 480 MB'S A SECOND OUT OFF 500 MB'S A SECOND!

I EVEN PLAYED STAR TREK D-A-C (FROM THE MAC APP STORE) YESTERDAY AND HAD NO PROBLEMS WHATSOEVER!

Are you sure you aren't using E-Sata?

USB 2.0 support 480 Mbps which as others have observed is 35MBps. Even if the drive supports 550MBps (which it probably does by SATA3) the USB 2.0 interface will slow it down to 35 :\

USB 3.0 could give you those kinds of speeds, but not USB 2.0

Folks, he has admitted on his own that he has mental problems. Feeding into it only makes it worse for him and everyone else.

Sometimes he literally cannot help the fact that he won't listen and gets agitated.

Kevin, this is a case where you are wrong. Don't make things worse on yourself by arguing with people who know what they are talking about.

You and I have had this type of discussion many times over the last several years.

Walk away and do the proper research when you're well, not when you're sick and cannot judge things well, ok?

bipolar ?

If that's the case yeah better leave him alone.

He's never specified the exact issue. If it is BP it is far beyond what I experience...which is already a pain. :p

I played wow with a bipolar guy for a year. It was a hell of a roller coaster ride lol ;) he was a nice guy tough.

which USB connection are you using exactly? USB1, 1.1, 2, or 3 and does the USB to SATA bridge even support what you are using?

how about you answer the question, which USB spec are you running against? USB 1, 1.1, 2 or 3?

and post a picture of a hard drive benchmark test like Crystal DiskMark or HDTac or something similar

it's the 2010 mac mini, so if he's using usb it'd be 2.0

edit: more specifically this is the SSD that he got that he claims is external because it came with a cord http://www.crucial.com/store/mpartspecs.aspx?mtbpoid=78D9B390A5CA7304

USB 2.0 is 480 Mbps (mega bit). Your SSD is 500 MBps (mega byte).

So in fact USB 2.0 is 60 MBps, and once you take the protocol and overhead into account it's closer to 30 MBps.

But you seem pretty adamant on not believing what people say so, whatever.

it's the 2010 mac mini, so if he's using usb it'd be 2.0

edit: more specifically this is the SSD that he got that he claims is external because it came with a cord http://www.crucial.c...8D9B390A5CA7304

Thanks for the article now it is easy to see what he is getting at, albeit it would appear that he is using the transfer kit for using the SSD as an external drive. . .some peoples kids.

USB 2.0 is 480 Mbps (mega bit). Your SSD is 500 MBps (mega byte).

So in fact USB 2.0 is 60 MBps, and once you take the protocol and overhead into account it's closer to 30 MBps.

But you seem pretty adamant on not believing what people say so, whatever.

yeah, just so people know 500 MBps = 4000 Mbps

USB2 maxes out at 480Mbps that's 8.3333 times slower then the SSD's max speed

now if this was running under USB3, yeah you'd get good speed, but USB2 why even have a SSD you are going slower then your mechanical HDD

yeah it comes with a cord

The Data Transfer Kit makes it simple to copy everything on your hard drive, including operating system, data, email settings and applications, to your Crucial m4. The kit includes the EZ Gig III Cloning and Imaging Software for Windows?, ShirtPocket's SuperDuper! for Mac?, a USB to SATA cable and a Quick Start Guide. Upgrade your notebook drive in just three simple steps.

Not sure why you can not believe the USB 2 spec.

http://www.usb.org/developers/docs/

http://www.usb.org/d...rs/usb20/faq20/

1: What maximum speed was finally chosen for the USB 2.0 spec?

A: The USB 2.0 specification has a design data rate of 480 mega bits per second.

This is just fact, if you don't believe it - then download the spec for yourself - I listed the url for it.

yeah, just so people know 500 MBps = 4000 Mbps

USB2 maxes out at 480Mbps that's 8.3333 times slower then the SSD's max speed

now if this was running under USB3, yeah you'd get good speed, but USB2 why even have a SSD you are going slower then your mechanical HDD

Also USB is 480Mbps BURST transfer. it's the highst USB2 will go in a single burst, but it doesn't transfer at that speed constantly, hence why it's called burst.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Calibre 9.10 by Razvan Serea  Calibre is an open source e-book library management application that enables you to manage your e-book collection, convert e-books between different formats, synchronize with popular e-book reader devices, and read your e-books with the included viewer. It acts as an e-library and also allows for format conversion, news feeds to e-book conversion, as well as e-book reader sync features and an integrated e-book viewer. Calibre's features include: library management; format conversion (all major ebook formats); syncing to e-book reader devices; fetching news from the Web and converting it into ebook form; viewing many different e-book formats, giving you access to your book collection over the internet using just a browser. Calibre 9.10 changelog: New features Content server: A new "modern" interface with a sidebar to ease navigation Content server: When used with HTTPS allow installation as a PWA (Progressive Web App) Edit book: Saved searches: When filtering the list of saved searches match by keywords CSS parsing: Add support for CSS Level 4 selectors Cover grid: When using an image larger than the viewport as a texture scale it to fit the viewport Annotations browser: Allow restricting displayed annotations by custom annotation styles as well Edit book: Compress images: Add option to convert PNG images to JPEG or WEBP Bug fixes E-book viewer: Fix IME on Windows not working when typing in notes for highlights Conversion: Heuristics: Improve performance in some pathological cases SNB Input: Fix error on some input files Windows: fix rare crash when too many notifications are displayed at once Fix duplicating of books not duplicating value from enumerated columns when the column has a default value defined Fix a regression in 9.8 that caused errors from AI plugin providers to be silently swallowed and not displayed to user Fix CSV export invalid when exporting comments field Disallow Python templates when reading book metadata (CVE-2026-53511) Improved news sources The Week Economist Espresso Horizons Download: Calibre 9.10 | Portable | ~200.0 MB (Open Source) Download: Calibre for MacOS | 327.0 MB Download: Calibre for Linux View: Calibre Home Page | Calibre Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Malwarebytes Anti-Malware 5.6.1.257 by Razvan Serea Malwarebytes is a high performance anti-malware application that thoroughly removes even the most advanced malware and spyware. Malwarebytes version 5.**** brings comprehensive protection against today’s threat landscape so that you can finally replace your traditional antivirus. You can finally replace your traditional antivirus, thanks to a innovative and layered approach to prevent malware infections using a healthy combination of proactive and signature-less technologies. While signatures are still effective against threats like potentially unwanted programs, the majority of malware detection events already come from signature-less technologies like Malwarebytes Anti-Exploit and Malwarebytes Anti-Ransomware; that trend will only continue to grow. For many of you, this is something you already know, since over 50% of the users already run Malwarebytes as their sole security software, without any third-party antivirus. What's new in Malwarebytes 5.****: Unified user experience - For the first time, Malwarebytes now provides a consistent experience across all of our desktop and mobile products courtesy of an all new and reimagined user experience powered by a faster and more responsive UI all managed through an intuitive dashboard. Modern security and privacy integrations - Antivirus and ultra-fast VPN come together seamlessly in one easy-to-use solution. Whether you’re looking for a next-gen VPN to secure your online activity, or harnessing the power of Browser Guard to block ad trackers and scam sites, taking charge of your privacy is simple. Trusted Advisor - Empowers you with real-time insights, easy-to-read protection score and expert guidance that puts you in control over your security and privacy. Malwarebytes 5.6.1.257 changelog: Features and improvements Updated the sign-in section of the My Subscription page to clarify that users can activate their subscription by signing in with their Malwarebytes account. Updated the uninstall flow to collect more meaningful insights and address customer concerns. Refreshed the app's tutorial layout for a better look and feel. Issues fixed Fixed an outdated link when clicking Take action after running a Digital Footprint Scan. Miscellaneous bug fixes. Download: Malwarebytes 5.6.1.257 | 472.0 MB (Free, paid upgrade available) Links: Malwarebytes Website | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Yep, not sure where the surprise is here. They release a new model for every phone, every year
    • AI would probably be better utilised replacing Executives than Engineers.
  • Recent Achievements

    • Week One Done
      xvvxcvv earned a badge
      Week One Done
    • One Month Later
      xvvxcvv earned a badge
      One Month Later
    • Enthusiast
      Xonos went up a rank
      Enthusiast
    • Conversation Starter
      Admir earned a badge
      Conversation Starter
    • First Post
      The_Focal_Point earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      405
    2. 2
      +Edouard
      168
    3. 3
      PsYcHoKiLLa
      129
    4. 4
      neufuse
      69
    5. 5
      Xenon
      68
  • Tell a friend

    Love Neowin? Tell a friend!