My SSD Only Supports 500MB's Read and 175 MB's Write!


Recommended Posts

You guy's gave me he** for using my 128 GB M4 SSD Externally. Well I just wanted to let you guys know that my SSD only support's 500 MB's a Second Read and 175 MB's a Second Write! It is indeed designed to be used Externally, NOT Internally as USB 2.0 Supports 480 MB's a Second! Just FYI!

actually USB2 supports 480Mb not MB (which is 35MB per second) ;) USB3 isn't bad at 5Gbits or 625 MB a second

An SSD on USB 2? Err... wha...

Some SSD's had USB ports on them... gawd knows why they thought this was a good idea, but some had them...

Some SSD's had USB ports on them... gawd knows why they thought this was a good idea, but some had them...

I can only guesstimate that it would have been for a drive recovery scenario where you were temporarily connecting it to access some of the data. But I concur that makes no sense...

To actually place an SSD on USB 2 as an external primarily is grossly a waste of money. Even the slowest HDD would handle that scenario just fine.

It is indeed designed to be used Externally, NOT Internally as USB 2.0 Supports 480 MB's a Second! Just FYI!

No.

"USB 2.0: Released in April 2000. Added higher maximum signaling rate of 480 Mbit/s (effective throughput up to 35 MB/s or 280 MBit/s)"

actually USB2 supports 480Mb not MB (which is 35MB per second) ;) USB3 isn't bad at 5Gbits or 625 MB a second

Some SSD's had USB ports on them... gawd knows why they thought this was a good idea, but some had them...

An M4 would be a "bare" drive.

I've reread the OP's post about 10 times and still can't real decipher it. :s

I can only guesstimate that it would have been for a drive recovery scenario where you were temporarily connecting it to access some of the data. But I concur that makes no sense...

To actually place an SSD on USB 2 as an external primarily is grossly a waste of money. Even the slowest HDD would handle that scenario just fine.

If you ever figure out their reasoning let me know *lol* I always thought why?... only thing I could think was for easy mirroring of a hard drive to the SSD via USB but that's still a dumb idea if you understand the difference between storage on SSD and HDD's like 512 vs 4k sectors and how mirroring one to the other is kinda an ehh idea to do..

An M4 would be a "bare" drive.

I've reread the OP's post about 10 times and still can't real decipher it. :s

ah, didn't look up that specific drive, was just going by past experience with ssd's sometimes having mini usb ports

An M4 would be a "bare" drive.

I've reread the OP's post about 10 times and still can't real decipher it. :s

He got an internal SSD with a USB cable, thought it was external (I guess because SSDs look like they come in a case compared to a spinny drive), plugged it in via USB 2, apparently thinks it's now running at nearly full speed. :laugh:

I assume it's just sitting on his desk too, which I suppose isn't the worst with an SSD, but it just adds to the ridiculousness.

If you ever figure out their reasoning let me know *lol* I always thought why?... only thing I could think was for easy mirroring of a hard drive to the SSD via USB but that's still a dumb idea if you understand the difference between storage on SSD and HDD's like 512 vs 4k sectors and how mirroring one to the other is kinda an ehh idea to do..

They're cheaper than a flash drive, and slightly more durable than a portable disk drive. I guess there's that. Makes more sense if you have USB 3.0 anyway.

and once again kevpan, you didn't listen to us, only yelled at everyone that was trying to correct you

the ssd you got IS an internal drive. the cord is only for you to easily clone your old internal over to the new drive before putting the new one in

we even linked you to some instructions on how to easily do it all but you chose to ignore us and just attack everyone trying to help you

He got an internal SSD with a USB cable, thought it was external (I guess because SSDs look like they come in a case compared to a spinny drive), plugged it in via USB 2, apparently thinks it's now running at nearly full speed. :laugh:

I assume it's just sitting on his desk too, which I suppose isn't the worst with an SSD, but it just adds to the ridiculousness.

Interesting. If that's the case, there is NO way that he would be getting anywhere near the 500MB/s that he stated. Even 50MB/s would be stretch. :rofl:

WRONG! IT IS GETTING ALMOST FULL SPEED AS IT IS GETTING 480 MB'S A SECOND OUT OFF 500 MB'S A SECOND!

I EVEN PLAYED STAR TREK D-A-C (FROM THE MAC APP STORE) YESTERDAY AND HAD NO PROBLEMS WHATSOEVER!

I can only guesstimate that it would have been for a drive recovery scenario where you were temporarily connecting it to access some of the data. But I concur that makes no sense...

To actually place an SSD on USB 2 as an external primarily is grossly a waste of money. Even the slowest HDD would handle that scenario just fine.

Yup. I personally use a hybrid drive externally. But i use it on eSata as using it on USB 2 would make no sense at all.

Folks, he has admitted on his own that he has mental problems. Feeding into it only makes it worse for him and everyone else.

Sometimes he literally cannot help the fact that he won't listen and gets agitated.

WRONG! IT IS GETTING ALMOST FULL SPEED AS IT IS GETTING 480 MB'S A SECOND OUT OFF 500 MB'S A SECOND!

I EVEN PLAYED STAR TREK D-A-C (FROM THE MAC APP STORE) YESTERDAY AND HAD NO PROBLEMS WHATSOEVER!

Kevin, this is a case where you are wrong. Don't make things worse on yourself by arguing with people who know what they are talking about.

You and I have had this type of discussion many times over the last several years.

Walk away and do the proper research when you're well, not when you're sick and cannot judge things well, ok?

WRONG! IT IS GETTING ALMOST FULL SPEED AS IT IS GETTING 480 MB'S A SECOND OUT OFF 500 MB'S A SECOND!

I EVEN PLAYED STAR TREK D-A-C (FROM THE MAC APP STORE) YESTERDAY AND HAD NO PROBLEMS WHATSOEVER!

Are you sure you aren't using E-Sata?

USB 2.0 support 480 Mbps which as others have observed is 35MBps. Even if the drive supports 550MBps (which it probably does by SATA3) the USB 2.0 interface will slow it down to 35 :\

USB 3.0 could give you those kinds of speeds, but not USB 2.0

Folks, he has admitted on his own that he has mental problems. Feeding into it only makes it worse for him and everyone else.

Sometimes he literally cannot help the fact that he won't listen and gets agitated.

Kevin, this is a case where you are wrong. Don't make things worse on yourself by arguing with people who know what they are talking about.

You and I have had this type of discussion many times over the last several years.

Walk away and do the proper research when you're well, not when you're sick and cannot judge things well, ok?

bipolar ?

If that's the case yeah better leave him alone.

He's never specified the exact issue. If it is BP it is far beyond what I experience...which is already a pain. :p

I played wow with a bipolar guy for a year. It was a hell of a roller coaster ride lol ;) he was a nice guy tough.

which USB connection are you using exactly? USB1, 1.1, 2, or 3 and does the USB to SATA bridge even support what you are using?

how about you answer the question, which USB spec are you running against? USB 1, 1.1, 2 or 3?

and post a picture of a hard drive benchmark test like Crystal DiskMark or HDTac or something similar

it's the 2010 mac mini, so if he's using usb it'd be 2.0

edit: more specifically this is the SSD that he got that he claims is external because it came with a cord http://www.crucial.com/store/mpartspecs.aspx?mtbpoid=78D9B390A5CA7304

USB 2.0 is 480 Mbps (mega bit). Your SSD is 500 MBps (mega byte).

So in fact USB 2.0 is 60 MBps, and once you take the protocol and overhead into account it's closer to 30 MBps.

But you seem pretty adamant on not believing what people say so, whatever.

it's the 2010 mac mini, so if he's using usb it'd be 2.0

edit: more specifically this is the SSD that he got that he claims is external because it came with a cord http://www.crucial.c...8D9B390A5CA7304

Thanks for the article now it is easy to see what he is getting at, albeit it would appear that he is using the transfer kit for using the SSD as an external drive. . .some peoples kids.

USB 2.0 is 480 Mbps (mega bit). Your SSD is 500 MBps (mega byte).

So in fact USB 2.0 is 60 MBps, and once you take the protocol and overhead into account it's closer to 30 MBps.

But you seem pretty adamant on not believing what people say so, whatever.

yeah, just so people know 500 MBps = 4000 Mbps

USB2 maxes out at 480Mbps that's 8.3333 times slower then the SSD's max speed

now if this was running under USB3, yeah you'd get good speed, but USB2 why even have a SSD you are going slower then your mechanical HDD

yeah it comes with a cord

The Data Transfer Kit makes it simple to copy everything on your hard drive, including operating system, data, email settings and applications, to your Crucial m4. The kit includes the EZ Gig III Cloning and Imaging Software for Windows?, ShirtPocket's SuperDuper! for Mac?, a USB to SATA cable and a Quick Start Guide. Upgrade your notebook drive in just three simple steps.

Not sure why you can not believe the USB 2 spec.

http://www.usb.org/developers/docs/

http://www.usb.org/d...rs/usb20/faq20/

1: What maximum speed was finally chosen for the USB 2.0 spec?

A: The USB 2.0 specification has a design data rate of 480 mega bits per second.

This is just fact, if you don't believe it - then download the spec for yourself - I listed the url for it.

yeah, just so people know 500 MBps = 4000 Mbps

USB2 maxes out at 480Mbps that's 8.3333 times slower then the SSD's max speed

now if this was running under USB3, yeah you'd get good speed, but USB2 why even have a SSD you are going slower then your mechanical HDD

Also USB is 480Mbps BURST transfer. it's the highst USB2 will go in a single burst, but it doesn't transfer at that speed constantly, hence why it's called burst.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Which finger's fingernail are we talking about? I can see how not having this info can lead to massive differences in interpretation.
    • This Chinese company is reportedly developing a feature Apple and Samsung can only dream of by Hamid Ganji While companies like Apple and Samsung have been relatively conservative with their devices’ battery capacities in recent years, Chinese manufacturers have taken the competition to the next level by introducing significantly larger batteries. However, the latest report from China suggests that a local company may already be developing a smartphone with a whopping 14,000mAh battery. Chinese leaker Digital Chat Station claimed on Weibo that a smartphone maker is developing a device with a 14,000mAh battery. If true, it would be the largest battery ever used in a smartphone and could, in theory, provide up to a week of battery life on a single charge. The leaker did not reveal the name of the company behind the device, but there are some clues. This week, HONOR unveiled the X80 Pro Max in China with an 11,000mAh battery and 90W wired charging support. The company also launched the Honor Win in January, which packs a 10,000mAh battery. HONOR, a former subsidiary of Huawei, has a proven track record of developing smartphones with unusually large batteries. However, other Chinese brands, including Xiaomi, have also launched devices such as the Xiaomi 17 Pro Max with 7,500mAh batteries. Though Chinese users on Weibo also believe the company behind the new battery is HONOR. Interestingly, Digital Chat Station said the device with the 14,000mAh battery weighs around 220 grams, making it lighter than the Apple iPhone 17 Pro Max (233 grams) and slightly heavier than the Samsung Galaxy S26 Ultra (214 grams). The iPhone 17 Pro Max currently packs a 5,088mAh battery in eSIM-only versions, while the Galaxy S26 Ultra features a 5,000mAh battery. Neither device is expected to see a dramatic increase in battery capacity in its next-generation successor. So when it comes to battery comparison, Chinese brands are unbeaten. HONOR smartphones are currently available in the EU, but the Chinese brand has no official presence in the United States due to restrictions imposed by the U.S. government.
    • Qualcomm takes on NVIDIA with new Dragonfly CPU and AI chips by Pradeep Viswanathan Microsoft, Google, Amazon, AMD, Meta, Apple, OpenAI, and several others have been developing their own chips for AI infrastructure. However, NVIDIA still remains the dominant player in the market. Today, Qualcomm announced a major expansion of its data center infrastructure portfolio to better compete with NVIDIA. The new lineup includes the Qualcomm Dragonfly C1000 CPU, Qualcomm High Bandwidth Compute technology, the Dragonfly AI300 inference accelerator, new connectivity products, and custom silicon solutions. Qualcomm claims that this new lineup improves performance per watt, token throughput, and total cost of ownership for AI data centers. The Dragonfly C1000 is a new data center CPU built with Qualcomm’s custom Oryon cores. This chip will feature more than 250 cores, frequencies above 5GHz, and a chiplet-based design. Qualcomm claims that this new C1000 can deliver more than 2x better performance per watt compared to existing server CPU offerings based on specifications. The Dragonfly C1000 will support PCIe Gen 7 with more than 2TB/s of connectivity, along with CXL, advanced RAS features, and both air and liquid cooling. Qualcomm expects the Dragonfly C1000 to be commercially available in 2028. Additionally, Qualcomm and Meta announced a multi-year, multi-generation agreement under which Qualcomm will supply Dragonfly C1000 data center CPUs for Meta’s next-generation server fleet. Qualcomm also announced High Bandwidth Compute, a new near-memory computing architecture designed to address AI’s memory bandwidth bottleneck. HBC Gen 1 will debut with the Dragonfly AI250, which is expected to sample in mid-2027. The AI250 will deliver 133TB/s per card, an 18x increase in effective memory bandwidth compared to the AI200 with LPDDR5X. The new Dragonfly AI300 with HBC Gen 2 is a rack-level AI inference platform from Qualcomm. Qualcomm claims that the AI300 can deliver 4x to 8x better performance per watt compared to existing GPU-based architectures based on memory bandwidth per watt per card. The Dragonfly AI300 is expected to be available in 2028.
  • Recent Achievements

    • Week One Done
      Meta Plast earned a badge
      Week One Done
    • First Post
      kinowa earned a badge
      First Post
    • Rookie
      krychek57 went up a rank
      Rookie
    • Grand Master
      Jaybonaut went up a rank
      Grand Master
    • One Year In
      Philsl earned a badge
      One Year In
  • Popular Contributors

    1. 1
      +primortal
      461
    2. 2
      +Edouard
      171
    3. 3
      PsYcHoKiLLa
      136
    4. 4
      Michael Scrip
      78
    5. 5
      Xenon
      77
  • Tell a friend

    Love Neowin? Tell a friend!