My SSD Only Supports 500MB's Read and 175 MB's Write!


Recommended Posts

You guy's gave me he** for using my 128 GB M4 SSD Externally. Well I just wanted to let you guys know that my SSD only support's 500 MB's a Second Read and 175 MB's a Second Write! It is indeed designed to be used Externally, NOT Internally as USB 2.0 Supports 480 MB's a Second! Just FYI!

actually USB2 supports 480Mb not MB (which is 35MB per second) ;) USB3 isn't bad at 5Gbits or 625 MB a second

An SSD on USB 2? Err... wha...

Some SSD's had USB ports on them... gawd knows why they thought this was a good idea, but some had them...

Some SSD's had USB ports on them... gawd knows why they thought this was a good idea, but some had them...

I can only guesstimate that it would have been for a drive recovery scenario where you were temporarily connecting it to access some of the data. But I concur that makes no sense...

To actually place an SSD on USB 2 as an external primarily is grossly a waste of money. Even the slowest HDD would handle that scenario just fine.

It is indeed designed to be used Externally, NOT Internally as USB 2.0 Supports 480 MB's a Second! Just FYI!

No.

"USB 2.0: Released in April 2000. Added higher maximum signaling rate of 480 Mbit/s (effective throughput up to 35 MB/s or 280 MBit/s)"

actually USB2 supports 480Mb not MB (which is 35MB per second) ;) USB3 isn't bad at 5Gbits or 625 MB a second

Some SSD's had USB ports on them... gawd knows why they thought this was a good idea, but some had them...

An M4 would be a "bare" drive.

I've reread the OP's post about 10 times and still can't real decipher it. :s

I can only guesstimate that it would have been for a drive recovery scenario where you were temporarily connecting it to access some of the data. But I concur that makes no sense...

To actually place an SSD on USB 2 as an external primarily is grossly a waste of money. Even the slowest HDD would handle that scenario just fine.

If you ever figure out their reasoning let me know *lol* I always thought why?... only thing I could think was for easy mirroring of a hard drive to the SSD via USB but that's still a dumb idea if you understand the difference between storage on SSD and HDD's like 512 vs 4k sectors and how mirroring one to the other is kinda an ehh idea to do..

An M4 would be a "bare" drive.

I've reread the OP's post about 10 times and still can't real decipher it. :s

ah, didn't look up that specific drive, was just going by past experience with ssd's sometimes having mini usb ports

An M4 would be a "bare" drive.

I've reread the OP's post about 10 times and still can't real decipher it. :s

He got an internal SSD with a USB cable, thought it was external (I guess because SSDs look like they come in a case compared to a spinny drive), plugged it in via USB 2, apparently thinks it's now running at nearly full speed. :laugh:

I assume it's just sitting on his desk too, which I suppose isn't the worst with an SSD, but it just adds to the ridiculousness.

If you ever figure out their reasoning let me know *lol* I always thought why?... only thing I could think was for easy mirroring of a hard drive to the SSD via USB but that's still a dumb idea if you understand the difference between storage on SSD and HDD's like 512 vs 4k sectors and how mirroring one to the other is kinda an ehh idea to do..

They're cheaper than a flash drive, and slightly more durable than a portable disk drive. I guess there's that. Makes more sense if you have USB 3.0 anyway.

and once again kevpan, you didn't listen to us, only yelled at everyone that was trying to correct you

the ssd you got IS an internal drive. the cord is only for you to easily clone your old internal over to the new drive before putting the new one in

we even linked you to some instructions on how to easily do it all but you chose to ignore us and just attack everyone trying to help you

He got an internal SSD with a USB cable, thought it was external (I guess because SSDs look like they come in a case compared to a spinny drive), plugged it in via USB 2, apparently thinks it's now running at nearly full speed. :laugh:

I assume it's just sitting on his desk too, which I suppose isn't the worst with an SSD, but it just adds to the ridiculousness.

Interesting. If that's the case, there is NO way that he would be getting anywhere near the 500MB/s that he stated. Even 50MB/s would be stretch. :rofl:

WRONG! IT IS GETTING ALMOST FULL SPEED AS IT IS GETTING 480 MB'S A SECOND OUT OFF 500 MB'S A SECOND!

I EVEN PLAYED STAR TREK D-A-C (FROM THE MAC APP STORE) YESTERDAY AND HAD NO PROBLEMS WHATSOEVER!

I can only guesstimate that it would have been for a drive recovery scenario where you were temporarily connecting it to access some of the data. But I concur that makes no sense...

To actually place an SSD on USB 2 as an external primarily is grossly a waste of money. Even the slowest HDD would handle that scenario just fine.

Yup. I personally use a hybrid drive externally. But i use it on eSata as using it on USB 2 would make no sense at all.

Folks, he has admitted on his own that he has mental problems. Feeding into it only makes it worse for him and everyone else.

Sometimes he literally cannot help the fact that he won't listen and gets agitated.

WRONG! IT IS GETTING ALMOST FULL SPEED AS IT IS GETTING 480 MB'S A SECOND OUT OFF 500 MB'S A SECOND!

I EVEN PLAYED STAR TREK D-A-C (FROM THE MAC APP STORE) YESTERDAY AND HAD NO PROBLEMS WHATSOEVER!

Kevin, this is a case where you are wrong. Don't make things worse on yourself by arguing with people who know what they are talking about.

You and I have had this type of discussion many times over the last several years.

Walk away and do the proper research when you're well, not when you're sick and cannot judge things well, ok?

WRONG! IT IS GETTING ALMOST FULL SPEED AS IT IS GETTING 480 MB'S A SECOND OUT OFF 500 MB'S A SECOND!

I EVEN PLAYED STAR TREK D-A-C (FROM THE MAC APP STORE) YESTERDAY AND HAD NO PROBLEMS WHATSOEVER!

Are you sure you aren't using E-Sata?

USB 2.0 support 480 Mbps which as others have observed is 35MBps. Even if the drive supports 550MBps (which it probably does by SATA3) the USB 2.0 interface will slow it down to 35 :\

USB 3.0 could give you those kinds of speeds, but not USB 2.0

Folks, he has admitted on his own that he has mental problems. Feeding into it only makes it worse for him and everyone else.

Sometimes he literally cannot help the fact that he won't listen and gets agitated.

Kevin, this is a case where you are wrong. Don't make things worse on yourself by arguing with people who know what they are talking about.

You and I have had this type of discussion many times over the last several years.

Walk away and do the proper research when you're well, not when you're sick and cannot judge things well, ok?

bipolar ?

If that's the case yeah better leave him alone.

He's never specified the exact issue. If it is BP it is far beyond what I experience...which is already a pain. :p

I played wow with a bipolar guy for a year. It was a hell of a roller coaster ride lol ;) he was a nice guy tough.

which USB connection are you using exactly? USB1, 1.1, 2, or 3 and does the USB to SATA bridge even support what you are using?

how about you answer the question, which USB spec are you running against? USB 1, 1.1, 2 or 3?

and post a picture of a hard drive benchmark test like Crystal DiskMark or HDTac or something similar

it's the 2010 mac mini, so if he's using usb it'd be 2.0

edit: more specifically this is the SSD that he got that he claims is external because it came with a cord http://www.crucial.com/store/mpartspecs.aspx?mtbpoid=78D9B390A5CA7304

USB 2.0 is 480 Mbps (mega bit). Your SSD is 500 MBps (mega byte).

So in fact USB 2.0 is 60 MBps, and once you take the protocol and overhead into account it's closer to 30 MBps.

But you seem pretty adamant on not believing what people say so, whatever.

it's the 2010 mac mini, so if he's using usb it'd be 2.0

edit: more specifically this is the SSD that he got that he claims is external because it came with a cord http://www.crucial.c...8D9B390A5CA7304

Thanks for the article now it is easy to see what he is getting at, albeit it would appear that he is using the transfer kit for using the SSD as an external drive. . .some peoples kids.

USB 2.0 is 480 Mbps (mega bit). Your SSD is 500 MBps (mega byte).

So in fact USB 2.0 is 60 MBps, and once you take the protocol and overhead into account it's closer to 30 MBps.

But you seem pretty adamant on not believing what people say so, whatever.

yeah, just so people know 500 MBps = 4000 Mbps

USB2 maxes out at 480Mbps that's 8.3333 times slower then the SSD's max speed

now if this was running under USB3, yeah you'd get good speed, but USB2 why even have a SSD you are going slower then your mechanical HDD

yeah it comes with a cord

The Data Transfer Kit makes it simple to copy everything on your hard drive, including operating system, data, email settings and applications, to your Crucial m4. The kit includes the EZ Gig III Cloning and Imaging Software for Windows?, ShirtPocket's SuperDuper! for Mac?, a USB to SATA cable and a Quick Start Guide. Upgrade your notebook drive in just three simple steps.

Not sure why you can not believe the USB 2 spec.

http://www.usb.org/developers/docs/

http://www.usb.org/d...rs/usb20/faq20/

1: What maximum speed was finally chosen for the USB 2.0 spec?

A: The USB 2.0 specification has a design data rate of 480 mega bits per second.

This is just fact, if you don't believe it - then download the spec for yourself - I listed the url for it.

yeah, just so people know 500 MBps = 4000 Mbps

USB2 maxes out at 480Mbps that's 8.3333 times slower then the SSD's max speed

now if this was running under USB3, yeah you'd get good speed, but USB2 why even have a SSD you are going slower then your mechanical HDD

Also USB is 480Mbps BURST transfer. it's the highst USB2 will go in a single burst, but it doesn't transfer at that speed constantly, hence why it's called burst.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Rufus alternative Ventoy now supports Windows 11's mandatory update, fixes major boot bug by Sayan Sen While Microsoft has its own official Media Creation Tool used for making bootable USB media, there are some popular third-party utilities as well which offer additional options like bypassing system requirements, Microsoft Account creation, and more. One of these is Ventoy, and the software has received its latest update today. In fact, the app actually got a slew of updates over the last couple of days, three version releases in total, to be specific. The first release, version 1.1.13, was pulled as there was some unspecified error in the update, and as such, the corrected version 1.1.14 was pushed out. Following that on very short notice, 1.1.15 was published as well. For those unfamiliar, Ventoy is an open-source utility that lets users create a bootable USB drive once and then simply copy ISO, WIM, IMG, VHD, or EFI files onto it without repeatedly formatting the drive. It supports both legacy BIOS and UEFI boot modes, Secure Boot, and a wide range of operating systems, making it one of the most versatile tools in the category. The biggest change in version 1.1.14 is an updated Secure Boot shim file aimed at resolving the UEFI CA 2023 issue, which is basically a compatibility problem that has affected Secure Boot environments on some systems. If you recall, we reported about severe boot issues on HP devices following the release of updated Secure Boot 2023 keys. For anyone who may not be aware, back in early 2024, Microsoft announced that it was updating Secure Boot keys as they were going to become 15 years old in 2026, which is also when they are set to expire. As such, the new 2023 certificates have been rolling out with the newest Windows 11 updates. Updated boot manager and Secure Boot certificates are crucial for protection against malware like bootkits. These are mandatory updates. Alongside that, the VentoyPlugson graphical plugin configurator was updated in sync with the release. The update also introduces a new VTOY_SECURE_BOOT_POLICY option within the Global Control plugin, giving users more flexibility in managing Secure Boot behavior. Ventoy has also received a fix for a startup issue when Secure Boot was disabled. Microsoft does officially allow users to boot systems without Secure Boot as long as the PC is Secure Boot capable. The full changelog is given below: Update secure boot shim file to solve the UEFI CA 2023 issue. The new release use a new CA, so you need to enroll the new key for the first boot time. VentoyPlugson update synchronously. Global control plugin add a VTOY_SECURE_BOOT_POLICY option. Fix the boot issue when Secure Boot is disabled in the UEFI firmware. You can download the latest version of the app here on Ventoy's official GitHub repo or from Neowin software stories.
    • Windows 11 is fine, no issues on any of the machines I've run it on since release. The stricter security requirements are a good thing, sometimes the baseline needs to change and people will winge, but it is what it is. Happened with the move from 9x to NT - broke compatability Happened with XP SP2 when security started to become a serious consideration Certainly happend with Vista that brought in UAC, the concept of not running as admin (something that has been the norm in Linux/Unix from pretty much the start) and a completely new driver stack. Windows 11 will probably get looked back at as the point where even consumer and SMB IT was dragged kicking and screaming into a somewhat secure by default configuration.
    • Bluestacks has been emulating Android on Windows for fifteen years. It's janky and riddled with ads though, so WSA looked like it was going to be a huge improvement over the emulator experience. Too bad Microsoft dropped the ball on that.
    • Classic. China would be nothing without Western, Japanese, and South Korean technology.
    • The world is larger then your small viewpoint. Plenty of scientists care about this, especially those involved in space.
  • Recent Achievements

    • Rookie
      krychek57 went up a rank
      Rookie
    • Grand Master
      Jaybonaut went up a rank
      Grand Master
    • One Year In
      Philsl earned a badge
      One Year In
    • Dedicated
      Scoobystu earned a badge
      Dedicated
    • First Post
      Tom Schmidt earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      441
    2. 2
      +Edouard
      172
    3. 3
      PsYcHoKiLLa
      134
    4. 4
      Michael Scrip
      78
    5. 5
      Xenon
      77
  • Tell a friend

    Love Neowin? Tell a friend!