My SSD Only Supports 500MB's Read and 175 MB's Write!


Recommended Posts

kevpan815: dude, if everyone but you says that you are wrong they are usually right. Take your machine to a mac store and get them to put the new ssd in it. Stop freaking out about drive speeds and your warranty period.

Extra note:

lol this guy. I'm such a lurker but this is (almost) worth a post.

Check the original thread here: https://www.neowin.net/forum/topic/1123472-finally-placed-my-order-for-an-ssd-from-crucialcom

He can't be arsed to change the hard drive himself or take it to the mac store for fear of his warranty running out and now he is freaking out about read/write speeds claiming that the ssd is designed for external use because it came with a usb cable.

I say just leave it. There's no point asking a question if you won't accept the answer.

kevpan815: dude, if everyone but you says that you are wrong they are usually right. Take your machine to a mac store and get them to put the new ssd in it. Stop freaking out about drive speeds and your warranty period.

Extra note:

lol this guy. I'm such a lurker but this is (almost) worth a post.

Check the original thread here: http://www.neowin.ne...from-crucialcom

He can't be arsed to change the hard drive himself or take it to the mac store for fear of his warranty running out and now he is freaking out about read/write speeds claiming that the ssd is designed for external use because it came with a usb cable.

I say just leave it. There's no point asking a question if you won't accept the answer.

This and this, as others said before about USB 2.0 and the whole shenanigan about MBps and Mbps, they're correct :/

You are not getting full speed out of your SSD when it's connected via USB2. It is impossible, but since you just ignore what everyone's saying then it's pointless.

Do some benchmarks and learn the difference between a megabit and a megabyte. You'll soon see you're completely wrong if you bother to take the time to listen. People are just trying to advise you that the way you're using your newly purchased SSD is useless as USB2 is crippling it. If you don't want to take anyone's advice and learn then it's pointless even posting.

Is this the guy who paid USD 200 for a RAM upgrade?

I think he is just insane. Lock thread and ban.

Well that is pretty uncalled for. Everyone has to learn somewhere no?

Granted, from what I have seen in this thread and other threads that were linked to in this thread, the OP seems pretty adamant on not wanting to learn and insisting they are right, however if they are just able to accept the fact that most people are in fact here to help those who are looking to help themselves, well as I said, they can actually learn a whole lot if they so choose to do so.

With that said, comments like this one do not really help matters, and in fact, they probably make them worse. Just saying, it was pretty damn unnecessary to say, even if you do think it is the truth. Just proves that the old adage "if you do not have anything nice to say, do not say anything at all" also applies to the internet, even if people feel like they can say whatever they choose to another human being as they are behind the safety and anonymity of their IP address/monitor.

I am sure I just wasted my time posting this, but I felt it need to be said, and it also does apply to a few other responses in this thread. Sometimes people are just downright cruel. And as I said I do admit, it seems as though the OP does not want the help even though there are those offering it, however that is their loss, no need to fuel the flames and gang up on them.

  • Like 3

Where are you people coming up with 480 Mbps = 35 MB/s because your math is way waaaaaaaaaaay off.

Bytes = 8 bits, hence 480 Mbps aka Million bits per second divided by 8 = ~60 MBps aka Million bytes per second (that's the absolute theoretical maximum but because of overhead it's never that fast). Even though it can't push ~60MB/s perfectly that's still a very big jump from 35MB/s which you folks keep spitting out as though it were accurate to any degree.

USB 2.0 is theoretically capable of ~55-58MB/s sustained transfer speed if there are no other devices on the particular USB controller.

The OP simply made a booboo of sorts, I could tell that from reading the post he made - the rest of the posts hence have been basic garbage overall and a lot of misunderstandings and mistaken values for the potential, theoretical, and even real-world performance of USB 2.0.

Better luck next time people, and don't go so far off-track will ya?

Where are you people coming up with 480 Mbps = 35 MB/s because your math is way waaaaaaaaaaay off.

Bytes = 8 bits, hence 480 Mbps aka Million bits per second divided by 8 = ~60 MBps aka Million bytes per second (that's the absolute theoretical maximum but because of overhead it's never that fast). Even though it can't push ~60MB/s perfectly that's still a very big jump from 35MB/s which you folks keep spitting out as though it were accurate to any degree.

USB 2.0 is theoretically capable of ~55-58MB/s sustained transfer speed if there are no other devices on the particular USB controller.

The OP simply made a booboo of sorts, I could tell that from reading the post he made - the rest of the posts hence have been basic garbage overall and a lot of misunderstandings and mistaken values for the potential, theoretical, and even real-world performance of USB 2.0.

Better luck next time people, and don't go so far off-track will ya?

because USB isn't a 1:1 translation in speed

quote from wikipedia since I don't feel like writing a full description myself right now

USB 2.0: Released in April 2000. Added higher maximum signaling rate of 480 Mbit/s (effective throughput up to 35 MB/s or 280 MBit/s) (now called "Hi-Speed"). Further modifications to the USB specification have been done via Engineering Change Notices (ECN). The most important of these ECNs are included into the USB 2.0 specification package available from USB.org:[13]

and from tech republic

4: Actual data throughput

Actual data throughput is usually much less than the maximum advertised USB specification and is a function of many variables, including overhead. Actual throughput in practice is typically up to 35 - 40MB/sec for USB 2.0 and may exceed 400MB/sec for USB 3.0. NEC recently demonstrated its new USB 3.0 controller transferring 500MB in 4.4 seconds or ?only? 113.6MB/sec. Symwave and MCCI claim to have demonstrated over 270MB/sec data throughput at the Intel Developer Forum in September 2009.

sorry, but the rest of the posts aren't "garbage" but a bunch of people that realize there is more to the USB spec then what you are told you get...

so, the OP pm'd me and said he fried his system and it's somehow our fault

all i have to say is he obviously didn't follow the links with step by step directions we gave him very well

Can anyone forward me the PM from him....I'd love to read them. I have loved reading this thread....it's been a treat.

here's the two PMs i got from him

all the first pm said was "I now have a dead system and it's your guys fault"

second one said

The Drive does NOT even fit in my system, Just FYI! Now I have to save up $599.99 + Tax just so I can replace the system itself, and that does NOT include the fact that at some later point in time I will have to pay $149 for Apple Care, and $69.99 for an External Super Drive! Thanks a lot!

edit: and i just got a reply after asking why he doesn't take it to an apple store

No, that will NOT work, I used Pliers to undo all those Non Removable Bolts in the System, I just plain am going to have to save up $599 U.S.A. Dollars from my January Public Aid Paycheck (Social Security Disability) and buy a Late 2012 Mac Mini which will have USB 3.0 Ports on it. There are scratches on the system from where I was using the Pliers and that will most definitely Void my Warrenty. I also damaged the Heat Sync while trying to get the HDD out of the system. I am just plain going to have to buy a new system after the Holiday's!

he tried to use pliers to remove the bolts around the hard drive and ruined the heat sync. he brought it upon himself for not using the correct tools

here's the two PMs i got from him

all the first pm said was "I now have a dead system and it's your guys fault"

second one said

edit: and i just got a reply after asking why he doesn't take it to an apple store

he tried to use pliers to remove the bolts around the hard drive and ruined the heat sync. he brought it upon himself for not using the correct tools

That is sweet.

he tried to use pliers to remove the bolts around the hard drive and ruined the heat sync. he brought it upon himself for not using the correct tools

This thread. :|

All those years that I did tech support and fixed computers...had no idea what was really out there.

just a reminder of the link we gave him with instructions on replacing the hard drive http://www.ifixit.co...lacement/3113/1

he probably completely ignored the link back when it was posted and never even clicked on it

here's the two PMs i got from him

all the first pm said was "I now have a dead system and it's your guys fault"

second one said

edit: and i just got a reply after asking why he doesn't take it to an apple store

he tried to use pliers to remove the bolts around the hard drive and ruined the heat sync. he brought it upon himself for not using the correct tools

Dear god :s , OP is probably PMing people because of all the bad comments. If someone can get through OP's head then that'll be great; other than that, this thread is just giving everyone lols :/

Look, the OP came here to gloat, not looking for advice. He seems happy with his setup in his own roundabout way and he probably wouldn't be able to tell the different between running off an SSD and running off a FDD.

The truth is that he doesn't need the power because his computational needs are basic (not running any intensive apps), and he just likes to play around with Operating Systems and keeping his prized Apple hardware intact, as this is all just his hobby.

I have seen from previous threads that he has a mental illness. So guys cut him some slack, it's not easy living with a mental illness. He is quite happy with this setup and he is getting satisfactory performance to him.

If he feels the need in the future to go even faster, he can make the decision for himself to do the upgrade when his Mac Mini is out of warranty and then he will have nothing to lose .

(personally I would just do the upgrade now and keep the original drive spare for warranty purposes, and switch it back if I needed to send it in, as the Mac Minis are dead simple to work on unlike all other Apple hardware and it is the one thing you can easily take apart without breaking anything).

WRONG! IT IS GETTING ALMOST FULL SPEED AS IT IS GETTING 480 MB'S A SECOND OUT OFF 500 MB'S A SECOND!

I EVEN PLAYED STAR TREK D-A-C (FROM THE MAC APP STORE) YESTERDAY AND HAD NO PROBLEMS WHATSOEVER!

Well done sir, youve invented a new performance bandwidth for USB 2, your confusing Megabits with Megabytes, even a SATAIII SSD struggles to hit 480Mb (megaBYTES)/sec Read/writes on SATAIII/USB 3.0

you should come up with an aftermarket solution, you could make millions selling it to users with usb 2 but want usb3 speeds.

Edited by Intrinsica
Removed offensive word.

This thread ought to be locked and the OP's posts largely ignored, just like those of a certain banned member with the initials A.B.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Ford execs say they made a mistake when they replaced human engineers with AI by David Uzondu Ford recently announced that over the last three years, it's had to rehire about 350 "gray beard" engineers to mentor younger staff and reprogram diagnostic systems and AI tools that were failing to meet up to quality expectations. The company's VP of vehicle hardware engineering, Charles **** said that leaders overlooked the deep experience of veterans who survived many product cycles. **** admitted that simply replacing them with AI was a huge mistake, and that while AI is "a fantastic tool," it remains "only as good as the information you use to train it." The rehired engineers now run mandatory meetings to troubleshoot vehicles and reprogram automated engineering software and AI tools to prevent glitches before production. These technical specialists hunt for failure points before parts ever reach the plant floor, helping prevent the massive recalls and defects that previously cost the company billions as it aims to cut one billion dollars in expenses this year. In last year's JD Power Quality Survey, an annual study that measures the quality of a car during the first three months of ownership, Ford finished 10th among mainstream brands and scored below the industry average. But this year, JD Power ranked the automaker as the top mainstream brand, placing it above the likes of Toyota Motor Corp. and Honda Motor Co. Ford attributed this massive improvement directly to the expertise of these returned engineers. Ford's realization that AI cannot magically design and test quality vehicles without senior human oversight is just the tip of the iceberg. When Careerminds looked at companies that conducted AI-driven layoffs, researchers found out that 35.6% of those companies had to rehire more than half of the employees they previously fired. Another 32.7% had to rehire between 25% and 50% of them. In 2024, Sebastian Siemiatkowski, CEO of Klarna, proudly announced that its new chatbot was doing the work of 700 full-time customer service agents. As a result, the fintech company froze hiring and cut hundreds of positions. But by mid 2025, and into 2026, Klarna was scrambling to recruit human agents again because customer satisfaction had plummeted. It turns out, while AI is very good at answering basic questions like how to check an account balance, when faced with complex customer issues that require nuance, the thing usually resorts to the unhelpful, robotic corporate jargon we all know and love.
    • Free AI in IDEs is shifting to paid models Or you know, you could just learn to actually design and code apps, use frameworks to handle the repetitive parts and not use AI at all - and voila... free for life!
    • In a sane world US antitrust laws wouldn't even allow these companies to be in the position to be subjected to EU directives. As you say, better than oligarch nothing.
    • Apple reportedly has a second-generation iPhone Fold planned for 2027 Good grief, Apple hasn't even released a first folding phone and the Apple faithful is already obsessing over the sequel? Seriously people, go out and touch grass... because this level of obsession is borderline stalkery/neurotic.
    • I checked on the IPs associated with every login and they're all mine... And whenever I get a new prompt, there is no activity to show for it. 
  • Recent Achievements

    • Enthusiast
      Xonos went up a rank
      Enthusiast
    • Conversation Starter
      Admir earned a badge
      Conversation Starter
    • First Post
      The_Focal_Point earned a badge
      First Post
    • Apprentice
      daryld went up a rank
      Apprentice
    • Contributor
      Carltonbar went up a rank
      Contributor
  • Popular Contributors

    1. 1
      +primortal
      405
    2. 2
      +Edouard
      169
    3. 3
      PsYcHoKiLLa
      129
    4. 4
      neufuse
      69
    5. 5
      Xenon
      68
  • Tell a friend

    Love Neowin? Tell a friend!