My SSD Only Supports 500MB's Read and 175 MB's Write!


Recommended Posts

kevpan815: dude, if everyone but you says that you are wrong they are usually right. Take your machine to a mac store and get them to put the new ssd in it. Stop freaking out about drive speeds and your warranty period.

Extra note:

lol this guy. I'm such a lurker but this is (almost) worth a post.

Check the original thread here: https://www.neowin.net/forum/topic/1123472-finally-placed-my-order-for-an-ssd-from-crucialcom

He can't be arsed to change the hard drive himself or take it to the mac store for fear of his warranty running out and now he is freaking out about read/write speeds claiming that the ssd is designed for external use because it came with a usb cable.

I say just leave it. There's no point asking a question if you won't accept the answer.

kevpan815: dude, if everyone but you says that you are wrong they are usually right. Take your machine to a mac store and get them to put the new ssd in it. Stop freaking out about drive speeds and your warranty period.

Extra note:

lol this guy. I'm such a lurker but this is (almost) worth a post.

Check the original thread here: http://www.neowin.ne...from-crucialcom

He can't be arsed to change the hard drive himself or take it to the mac store for fear of his warranty running out and now he is freaking out about read/write speeds claiming that the ssd is designed for external use because it came with a usb cable.

I say just leave it. There's no point asking a question if you won't accept the answer.

This and this, as others said before about USB 2.0 and the whole shenanigan about MBps and Mbps, they're correct :/

You are not getting full speed out of your SSD when it's connected via USB2. It is impossible, but since you just ignore what everyone's saying then it's pointless.

Do some benchmarks and learn the difference between a megabit and a megabyte. You'll soon see you're completely wrong if you bother to take the time to listen. People are just trying to advise you that the way you're using your newly purchased SSD is useless as USB2 is crippling it. If you don't want to take anyone's advice and learn then it's pointless even posting.

Is this the guy who paid USD 200 for a RAM upgrade?

I think he is just insane. Lock thread and ban.

Well that is pretty uncalled for. Everyone has to learn somewhere no?

Granted, from what I have seen in this thread and other threads that were linked to in this thread, the OP seems pretty adamant on not wanting to learn and insisting they are right, however if they are just able to accept the fact that most people are in fact here to help those who are looking to help themselves, well as I said, they can actually learn a whole lot if they so choose to do so.

With that said, comments like this one do not really help matters, and in fact, they probably make them worse. Just saying, it was pretty damn unnecessary to say, even if you do think it is the truth. Just proves that the old adage "if you do not have anything nice to say, do not say anything at all" also applies to the internet, even if people feel like they can say whatever they choose to another human being as they are behind the safety and anonymity of their IP address/monitor.

I am sure I just wasted my time posting this, but I felt it need to be said, and it also does apply to a few other responses in this thread. Sometimes people are just downright cruel. And as I said I do admit, it seems as though the OP does not want the help even though there are those offering it, however that is their loss, no need to fuel the flames and gang up on them.

  • Like 3

Where are you people coming up with 480 Mbps = 35 MB/s because your math is way waaaaaaaaaaay off.

Bytes = 8 bits, hence 480 Mbps aka Million bits per second divided by 8 = ~60 MBps aka Million bytes per second (that's the absolute theoretical maximum but because of overhead it's never that fast). Even though it can't push ~60MB/s perfectly that's still a very big jump from 35MB/s which you folks keep spitting out as though it were accurate to any degree.

USB 2.0 is theoretically capable of ~55-58MB/s sustained transfer speed if there are no other devices on the particular USB controller.

The OP simply made a booboo of sorts, I could tell that from reading the post he made - the rest of the posts hence have been basic garbage overall and a lot of misunderstandings and mistaken values for the potential, theoretical, and even real-world performance of USB 2.0.

Better luck next time people, and don't go so far off-track will ya?

Where are you people coming up with 480 Mbps = 35 MB/s because your math is way waaaaaaaaaaay off.

Bytes = 8 bits, hence 480 Mbps aka Million bits per second divided by 8 = ~60 MBps aka Million bytes per second (that's the absolute theoretical maximum but because of overhead it's never that fast). Even though it can't push ~60MB/s perfectly that's still a very big jump from 35MB/s which you folks keep spitting out as though it were accurate to any degree.

USB 2.0 is theoretically capable of ~55-58MB/s sustained transfer speed if there are no other devices on the particular USB controller.

The OP simply made a booboo of sorts, I could tell that from reading the post he made - the rest of the posts hence have been basic garbage overall and a lot of misunderstandings and mistaken values for the potential, theoretical, and even real-world performance of USB 2.0.

Better luck next time people, and don't go so far off-track will ya?

because USB isn't a 1:1 translation in speed

quote from wikipedia since I don't feel like writing a full description myself right now

USB 2.0: Released in April 2000. Added higher maximum signaling rate of 480 Mbit/s (effective throughput up to 35 MB/s or 280 MBit/s) (now called "Hi-Speed"). Further modifications to the USB specification have been done via Engineering Change Notices (ECN). The most important of these ECNs are included into the USB 2.0 specification package available from USB.org:[13]

and from tech republic

4: Actual data throughput

Actual data throughput is usually much less than the maximum advertised USB specification and is a function of many variables, including overhead. Actual throughput in practice is typically up to 35 - 40MB/sec for USB 2.0 and may exceed 400MB/sec for USB 3.0. NEC recently demonstrated its new USB 3.0 controller transferring 500MB in 4.4 seconds or ?only? 113.6MB/sec. Symwave and MCCI claim to have demonstrated over 270MB/sec data throughput at the Intel Developer Forum in September 2009.

sorry, but the rest of the posts aren't "garbage" but a bunch of people that realize there is more to the USB spec then what you are told you get...

so, the OP pm'd me and said he fried his system and it's somehow our fault

all i have to say is he obviously didn't follow the links with step by step directions we gave him very well

Can anyone forward me the PM from him....I'd love to read them. I have loved reading this thread....it's been a treat.

here's the two PMs i got from him

all the first pm said was "I now have a dead system and it's your guys fault"

second one said

The Drive does NOT even fit in my system, Just FYI! Now I have to save up $599.99 + Tax just so I can replace the system itself, and that does NOT include the fact that at some later point in time I will have to pay $149 for Apple Care, and $69.99 for an External Super Drive! Thanks a lot!

edit: and i just got a reply after asking why he doesn't take it to an apple store

No, that will NOT work, I used Pliers to undo all those Non Removable Bolts in the System, I just plain am going to have to save up $599 U.S.A. Dollars from my January Public Aid Paycheck (Social Security Disability) and buy a Late 2012 Mac Mini which will have USB 3.0 Ports on it. There are scratches on the system from where I was using the Pliers and that will most definitely Void my Warrenty. I also damaged the Heat Sync while trying to get the HDD out of the system. I am just plain going to have to buy a new system after the Holiday's!

he tried to use pliers to remove the bolts around the hard drive and ruined the heat sync. he brought it upon himself for not using the correct tools

here's the two PMs i got from him

all the first pm said was "I now have a dead system and it's your guys fault"

second one said

edit: and i just got a reply after asking why he doesn't take it to an apple store

he tried to use pliers to remove the bolts around the hard drive and ruined the heat sync. he brought it upon himself for not using the correct tools

That is sweet.

he tried to use pliers to remove the bolts around the hard drive and ruined the heat sync. he brought it upon himself for not using the correct tools

This thread. :|

All those years that I did tech support and fixed computers...had no idea what was really out there.

just a reminder of the link we gave him with instructions on replacing the hard drive http://www.ifixit.co...lacement/3113/1

he probably completely ignored the link back when it was posted and never even clicked on it

here's the two PMs i got from him

all the first pm said was "I now have a dead system and it's your guys fault"

second one said

edit: and i just got a reply after asking why he doesn't take it to an apple store

he tried to use pliers to remove the bolts around the hard drive and ruined the heat sync. he brought it upon himself for not using the correct tools

Dear god :s , OP is probably PMing people because of all the bad comments. If someone can get through OP's head then that'll be great; other than that, this thread is just giving everyone lols :/

Look, the OP came here to gloat, not looking for advice. He seems happy with his setup in his own roundabout way and he probably wouldn't be able to tell the different between running off an SSD and running off a FDD.

The truth is that he doesn't need the power because his computational needs are basic (not running any intensive apps), and he just likes to play around with Operating Systems and keeping his prized Apple hardware intact, as this is all just his hobby.

I have seen from previous threads that he has a mental illness. So guys cut him some slack, it's not easy living with a mental illness. He is quite happy with this setup and he is getting satisfactory performance to him.

If he feels the need in the future to go even faster, he can make the decision for himself to do the upgrade when his Mac Mini is out of warranty and then he will have nothing to lose .

(personally I would just do the upgrade now and keep the original drive spare for warranty purposes, and switch it back if I needed to send it in, as the Mac Minis are dead simple to work on unlike all other Apple hardware and it is the one thing you can easily take apart without breaking anything).

WRONG! IT IS GETTING ALMOST FULL SPEED AS IT IS GETTING 480 MB'S A SECOND OUT OFF 500 MB'S A SECOND!

I EVEN PLAYED STAR TREK D-A-C (FROM THE MAC APP STORE) YESTERDAY AND HAD NO PROBLEMS WHATSOEVER!

Well done sir, youve invented a new performance bandwidth for USB 2, your confusing Megabits with Megabytes, even a SATAIII SSD struggles to hit 480Mb (megaBYTES)/sec Read/writes on SATAIII/USB 3.0

you should come up with an aftermarket solution, you could make millions selling it to users with usb 2 but want usb3 speeds.

Edited by Intrinsica
Removed offensive word.

This thread ought to be locked and the OP's posts largely ignored, just like those of a certain banned member with the initials A.B.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Micron reveals AI companies are spending billions to lock up its memory years in advance by Karthik Mudaliar The demand for more memory is far from over, and Micron is turning the AI-driven memory shortage into a much more predictable business. The company has revealed that it has signed 16 strategic supply agreements backed by roughly $22 billion in customer deposits and other financial commitments. The contracts cover DRAM and NAND deliveries over several years, with some running through 2030. With the AI boom, demand for high-bandwidth memory (HBM) has grown so quickly that large customers are now prepared to help finance future production in exchange for a guaranteed supply. According to Micron’s latest financial results, the company received commitments worth about $22 billion across its new agreements. Around $18 billion is expected to arrive as cash deposits, while the rest will come through other financial arrangements. Micron says the agreements could generate approximately $100 billion in future contracted obligations. They cover around 20% of its expected DRAM shipments and one-third of its NAND shipments during their respective terms. It should be noted that although AI infrastructure is the main force behind the current shortage, not all 16 agreements with Micron involve AI companies. Micron said the customers also include consumer electronics and automotive businesses, two sectors that increasingly compete with data centers for the same manufacturing capacity. HBM is consuming an increasing share of that supply. Unlike conventional desktop or server RAM, HBM stacks multiple memory dies vertically and places them close to an AI accelerator. This gives GPUs and other AI chips access to data at much higher speeds, but it also requires more complicated manufacturing and packaging. Micron says its 12-layer HBM4 memory is now shipping in high volume for a lead customer, with samples also supplied to other companies. The chipmaker has already generated more than $1 billion in HBM4 revenue and says the product is ramping twice as quickly as its earlier HBM3E generation. Samsung has similarly warned that the memory shortage could continue into 2027 and beyond. Consumer memory companies have also had to address sharp increases in DDR5 pricing, suggesting the effects are already reaching beyond the data center. For consumers, that could mean the AI memory crunch lasts longer than expected, even as manufacturers invest heavily in new production.
    • XnConvert 1.112 by Razvan Serea  XnConvert is a cross-platform batch image-converter and resizer with a powerful and ease of use experience. All common picture and graphics formats are supported (i.e. JPG, PNG, TIFF, GIF, Camera RAW, JPEG2000, WebP, OpenEXR) as well as supporting over 500 other image formats. Also available within the batch operations include rotating, adding of watermarks, adding of text along with many image-adjustment features such as brightness, shadows and more. Among the features included are: Batch adding of files and folders Support for drag and drop of files Batch rotating, cropping, resizing and more Adding of photo masks Preserving or removing image metadata in conversions Multipage image file support (i.e animated GIF, APNG, TIFF) Command line integration via NConvert Filters - such as 'Blur', 'Gaussian Blur', 'Emboss', "Sharpen' and much more Effects - such as 'Old camera' and much more Download: XnConvert 64-bit | Standalone | ~30.0 MB (Freeware) Download: XnConvert 32-bit | Standalone Links: XnConvert Website | Screenshot | Release Announcement Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Microsoft updates Visual Studio Code with chat cost tracking and multi-agent chats by Paul Hill Microsoft has just launched Visual Studio Code 1.126, its latest weekly release. This time, the company has focused on letting you see the total cost of chat sessions to spot expensive conversations; enabling multiple chats per session that run side-by-side in one agent host Copilot session; and letting you browse new folders safely in restricted mode. We have now reached the stage where free AI in IDEs is coming to an end. To help you keep track of your costs, VS Code now lets you see the entire cost of a chat session, rather than just individual turns. This should give you more transparency about which sessions consume the most credits, so you can better manage your usage over time and spend less. For those of you using the Agents window, you know it is possible to run and manage multiple agent sessions at once. In this update, a Copilot session started from an agent host can hold several chats at once. Explaining how this feature works, Microsoft writes: Finally, from this update forward, Microsoft will remove the pop-up when opening an untrusted folder. When you open a new folder now, it will automatically open in Restricted Mode. You will see a banner that lets you manage the trust level of the folder. Microsoft has made this change so that it’s easier to start inspecting code without giving it trust right away. If you have VS Code, you can check for updates within the app now to get this new version. Otherwise, you can download it from the Visual Studio Code website.
    • Anthropic accuses Alibaba of using 25,000 fake accounts to copy Claude's capabilities by Karthik Mudaliar Anthropic has accused Alibaba of using nearly 25,000 fraudulent accounts to extract capabilities from Claude on a huge scale. According to a report from Reuters, Anthropic told US lawmakers that operators linked to Alibaba and the company’s Qwen AI team generated 28.8 million exchanges with Claude between April 22 and June 5, 2026. That is a lot of Claude conversations, but Anthropic says this was not ordinary chatbot use. The company believes the accounts were part of a coordinated effort to collect answers that could help train or improve rival AI systems. The alleged campaign reportedly focused on some of Claude’s most valuable skills, including software development, multi-step reasoning, and agentic tasks. In practical terms, that means getting an AI model to plan and complete work across several stages rather than simply answering a single question. This is called 'distillation,' where AI companies use outputs from a larger model to train a smaller and cheaper one. The smaller model learns to imitate useful parts of the more capable system without needing the same amount of computing power. The distillation process isn't automatically suspicious, but the problem comes when one company gathers another provider's outputs without permission and at an industrial scale. Also, this does not mean Alibaba obtained Claude’s source code, model weights, or original training data. Instead, Anthropic claims the accounts repeatedly asked Claude carefully designed questions and collected the answers. Those answers could then be used as training material for another model. Anthropic has made similar accusations against DeepSeek, Moonshot AI, and MiniMax earlier this year. As Neowin previously reported, Anthropic said those three companies collectively generated more than 16 million Claude exchanges through roughly 24,000 accounts. Anthropic says the new campaign produced almost twice as many exchanges in a matter of weeks. Anthropic reportedly told lawmakers that the campaign could help Chinese AI developers approach the capabilities of its Mythos Preview model. Mythos is focused on advanced cybersecurity work, including finding and exploiting complex software vulnerabilities. via Reuters | Photo via DepositPhotos.com
    • An Indian manufacturer that assembles roughly one-third of Apple's iPhones and supplies semiconductor components to Tesla confirmed Monday that attackers had stolen and publicly published a 630-gigabyte cache of confidential files — including engineering blueprints stamped "TRADE SECRET," a 52-page quality inspection document for iPhone circuit board components, and cryptographic certificates that security experts say could be weaponized in follow-on attacks. https://www.techtimes.com/articles/319019/20260624/apple-tesla-supplier-tata-electronics-confirms-630-gb-data-theft-iphone-specs-dark-web.htm
  • Recent Achievements

    • Rookie
      krychek57 went up a rank
      Rookie
    • Grand Master
      Jaybonaut went up a rank
      Grand Master
    • One Year In
      Philsl earned a badge
      One Year In
    • Dedicated
      Scoobystu earned a badge
      Dedicated
    • First Post
      Tom Schmidt earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      441
    2. 2
      +Edouard
      176
    3. 3
      PsYcHoKiLLa
      133
    4. 4
      Michael Scrip
      79
    5. 5
      Xenon
      77
  • Tell a friend

    Love Neowin? Tell a friend!