Steam: alternative installation locations now available


Recommended Posts

One of the main complaints that many gamers have in regards to Valve Software?s popular Steam gaming platform is the limitation to one installation directory and partition. While you can use some magic, in form of programs like Steam Mover to move some folders to another drive, it was not something that a lot of Steam users knew about.

If you have been running out of disk space on the drive Steam was installed on, you were left with the choice to uninstall one of your installed games to make space for the new game, or move the entire Steam games library to another drive on your computer.

Valve finally seems to have come to their senses. When you run a game installation on Steam now, you will be presented with an ?choose drive to install to? option. You can use the option to create a secondary Steam library on another drive that is connected to the computer locally.

steam-change-game-installation-directory.png

Please note that you only see the option if the system has another partition or hard drive that is accessible under its own drive letter. You won?t get that option if you only have one partition on the system.

A click on ?create new Steam library on drive x:\? opens a configuration menu where you can select the Steam library folder location on the drive. You need to create a folder for the new Steam library as you can?t select the drive root as the location.

steam-create-new-library.png

Steam goes back to the game installation screen afterwards and displays the newly selected path under the installation options. The game is then downloaded and installed as usual on the system.

It feels strange that it took Valve that long to integrate secondary game libraries into Steam. The rise of Solid State Drives may have convinced the company to give it a shot, considering that you can?t save lots of games on an average SSD.

Source

Yea noticed this after the last update and went "cool".

I solved it in the past by just installing steam on the HDD and not my SSD at all.

Not sure why it took YEARS for that option.

Probably a lot to do with the DRM really.

  • Like 2

This has been in the past couple of updates...but yeah, it is pretty cool. I have Steam installed on my 80 GB SSD, and 80 GB isn't a whole lot of space for games. So, I ended up creating a library on one of my HDD's to store what I can't fit on the SSD.

Probably a lot to do with the DRM really.

Actually, probably a lot to do with this:

Some games don't seem to offer to install on another HDD, for example Borderlands has no option, whereas GTA IV does.

Why is this?

GTA IV uses Steam's new-ish HTTP-based content delivery system, which also uses a new file manifest format (ACF files vs GCF/NCFs), Borderlands probably still uses the old NCF-based system which doesn't have the flexibility to be installed out of location.

Actually, probably a lot to do with this:

GTA IV uses Steam's new-ish HTTP-based content delivery system, which also uses a new file manifest format (ACF files vs GCF/NCFs), Borderlands probably still uses the old NCF-based system which doesn't have the flexibility to be installed out of location.

Not sure I agree with that. As my Steam install resides on D: and I have never had issues.

Alittle bit late.

Yesterday, I have just extended my C Drive and changed the partitions sizes just in order to make room for more steam games.

I should have waited for a day

Steam finally realized people had more then one hard drive with their games on them as they needed more space. I've tried to keep my primary OS separate from my games, movie files for years. It's about time.

I do this very radically.Simply, I use my main OS as Ubuntu and 2ry OS for games is win7.Altough, Ihave an Xbox 360 Slim already.

Not sure I agree with that. As my Steam install resides on D: and I have never had issues.

I think you're confusing Steam install location with library install location(s), you could install Steam to any drive you want - but any files would have to be within steamapps\common\.

I think you're confusing Steam install location with library install location(s), you could install Steam to any drive you want - but any files would have to be within steamapps\common\.

Any installed game files... save files / profiles could end up all of the place.

Wonder if you can do this with folders on a home server, would be cool if more than one PC could use the same game folder on a central computer, would have to be gigabit network and a very fast drive obviously.

My Steam folder is now up to 1.6TB and contains over one million files. I've got it on a dedicated 3TB hard-drive and I'm on Windows 8, so if it gets too large I'll add another drive to my Storage Spaces array and transfer it across.

Any installed game files... save files / profiles could end up all of the place.

Saves/profiles aren't really relevant in this context, the point is that the old system very likely depends on the launcher / base files (moreso for Steamworks titles) existing within the common folder under the Steam install path.

The new format probably has entries for custom library locations that the old didn't. The GCF/NCF file formats are very old, and date back to the original release of HL2 in 2004.

My Steam folder is now up to 1.6TB and contains over one million files. I've got it on a dedicated 3TB hard-drive and I'm on Windows 8, so if it gets too large I'll add another drive to my Storage Spaces array and transfer it across.

Err, congratulation for hoarding games you'll never actually play and junking up your file system? Heh.

I tried this in the Bootstrapper beta they decided to postpone. It didn't work the greatest so I decided to hold off til a final release...now that it's in release I have plenty of space so I'm not terribly concerned.

Err, congratulation for hoarding games you'll never actually play and junking up your file system? Heh.

Modern file systems are perfectly capable of handling such data loads. If I want to play any game then I just launch it from Steam and it's up and running - no downloading, no delay. I often play older random games when I get bored. For instance, the other day I loaded up the original Crysis to take screenshots and I did the same with Aliens Versus Predator. If I kept deleting games that I hadn't played for years then I'd be constantly redownloading them and having to wait before playing them.

If I wanted gaming to be inconvenient and time consuming then I would have bought a console. I can afford the hard-drive capacity so I might as well use it, as I have over 13.5TB of storage and will probably add another 4TB at some point.

I think you're confusing Steam install location with library install location(s), you could install Steam to any drive you want - but any files would have to be within steamapps\common\.

Not confusing, just saying I don't see what his post of games not supporting alternative drives really means. As, the games already supported being installed on a drive other than C as long as Steam was also installed there.

Not confusing, just saying I don't see what his post of games not supporting alternative drives really means. As, the games already supported being installed on a drive other than C as long as Steam was also installed there.

No, you are confusing the ability to install Steam to any drive with the ability for Steam to install different games to multiple drives.

The old content system is not capable of this feature, the new one however has it built-in. Hence why Borderlands doesn't have the prompt while GTA4 does as the guy I quoted mentions.

Not confusing, just saying I don't see what his post of games not supporting alternative drives really means. As, the games already supported being installed on a drive other than C as long as Steam was also installed there.

Steam on C, Counter Strike on C, Skyrim on C, Farcry 3 on D.

That's what's new.

This topic is now closed to further replies.
  • Posts

    • Onkyo Dolby Atmos AV receivers are really solid deals by Sayan Sen Recently we covered great deals on several soundbar models from the likes of Sony, JBL, Samsung and others for really good prices (the lowest in several months). Aside from that we also reported on the Edifier S3000MKII, a hi-fi two-way bookshelf monitor that's available for only $800. Today we bring a list of AV receivers from Onkyo that are available at great prices including the Onkyo NR7100, RZ30, and 8470 (purchase links under the specs table down below). The Onkyo TX-NR7100 and Onkyo TX-RZ30 are both 9.2-channel AV receivers designed for immersive home theater setups but they occupy slightly different tiers within Onkyo’s lineup with the RZ30 positioned as the more advanced model. The TX-NR7100 is a THX Certified 9.2-channel receiver offering up to 100 W per channel (8 ohms, 2 channels driven). It supports Dolby Atmos, DTS:X, and IMAX Enhanced formats, with flexible configurations such as 5.1.4 or 7.1.2 speaker layouts. A key highlight is its built-in Dirac Live Room Correction which should help optimize sound based on your room and its acoustics. In comparison, both models share several core capabilities though the RZ30 is geared toward enthusiasts seeking more precise calibration and system flexibility, while the NR7100 is positioned as a slightly more accessible, value-focused option with strong all-round performance. The technical specs of the RZ30 and NR7100 9.2 AVRs are given in the table below: Specification Onkyo TX-RZ30 Onkyo TX-NR7100 Power Output (FTC, 2ch driven) ~100 W/ch (8Ω, 20Hz–20kHz, 0.08% THD) 100 W/ch (8Ω, 20Hz–20kHz, 0.08% THD) Dynamic / Peak Power 9 × 170 W (6Ω, 1kHz, 1% THD, 1ch driven) 220 W/ch (6Ω, 1kHz, 10% THD, 1ch driven) Frequency Response 5 Hz – 100 kHz (+1/-3 dB) 10 Hz – 100 kHz (+1/-3 dB) THD 0.08% 0.08% Room Correction Dirac Live (full bandwidth) Dirac Live (with AccuReflex support) Immersive Audio Dolby Atmos, DTS:X, IMAX Enhanced Dolby Atmos, DTS:X, IMAX Enhanced Speaker Layout Support Up to 7.2.2 / 5.2.4 / 9.2 processing Up to 7.2.4 / 5.2.4 / 9.2 processing HDMI Inputs / Outputs 6 inputs / 2 outputs (eARC) 6 inputs / 2 outputs (Main + Sub/Zone 2) HDMI 2.1 Support 8K/60, 4K/120, VRR, ALLM, QFT, DSC, eARC 8K/60, 4K/120, VRR, ALLM, QFT, DSC, eARC Video Formats HDR10+, Dolby Vision, HDCP 2.3 HDR10+, Dolby Vision, HDCP 2.3 Streaming / Network Wi-Fi, AirPlay 2, Chromecast, Bluetooth, DTS Play-Fi Wi-Fi, AirPlay 2, Chromecast, Bluetooth, DTS Play-Fi Get them at the links below: Onkyo TX-RZ30 9.2-Channel AV Receiver: $797.00 (Sold and shipped by Electronic Expo) Onkyo TX-NR7100 9.2-Channel AV Receiver: $699.00 (Sold and shipped by Adorma) Onkyo TX-8470 2 Ch Stereo Receiver: $449.00 (Sold and Shipped by Adorma) Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links or authorized dealer links (at the time of article publishing); ensure that you purchase from such links only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • A different thing with Russia. When you say is it better, depends on things. It is better that we don't have the E.U making rules and laws that have nothing to do with them. Is the trading part better? No, that is really mucked up, but then we knew that was going to happen and we would have make agreements, like we do with other parts of the world. Freedom of movement is certainly better, but could be improved, we still need more control over our borders. do you live in the U.K?
    • So what am I quoting from them? I never listened to what Farage or his cronies said. I wanted the U.K to leave the E.u years before the referendum and it had nothing to do with Farage and his cronies. So what country do you live in? Did we work much better together? We were always at logger heads with the E.U because we disagreed with them so much. Maggie was always on at them. I would have thought the E.U was glad to get rid of us as we stopped the integration or made it a two tier. Now without us they can integrate more. I would not have voted out if it was just a trading block and we can still work together on somethings.
    • MPC-BE 1.9.0 by Razvan Serea Media Player Classic - BE is a free and open source audio and video player for Windows. Media Player Classic - BE is based on the original "Media Player Classic" project (Gabest) and "Media Player Classic Home Cinema" project (Casimir666), contains additional features and bug fixes. The BE mod (Black Edition Mod) is a skinned version of Media Player Classic Home Cinema, much better looking than the plain old MPC. MPC-BE 1.9.0 changelog: Splitters Fixed crashes in some situations. AudioSplitter Added support for the RF64 format. Fixed reading of channel layout for some WavPack files. Added support for ID3 tags for Wave64 files. Unknown Wave64 chunks are now ignored. AviSplitter Added support for 'y408' video. Improved support for 'HEVC' video. FLVSplitter Added support for VVC video. MP4Splitter Improved handling of corrupted files. MatroskaSplitter Expanded support for V_UNCOMPRESSED video codecs. Fixed support for frame rotation (ProjectionPoseRoll). Improved support for "V_MS/VFW/FOURCC / HEVC". MpcDvdVideoDecoder Fixed conversion to YUY2. Fixed display of menus for some DVD-Videos. RoQVideoDecoder Output in NV12 and YV12 formats is allowed. Full range is used. MPC Video Decoder RGB32 format will be output as a top-down bitmap by default. Added support for the "IID_MediaSideDataDOVIMetadataV2" interface. Removed support for the deprecated "IID_MediaSideDataDOVIMetadata" interface. Fixed retrieving the name of the video adapter when using NVDEC. Fixed crashes in some situations. MPC Video Converter Added support for AYUV video format. MpcAudioRenderer Improved input format validation. Optimized retrieval of supported formats for exclusive mode. Added the "Keep audio device active when paused" setting. Fixed crashes and freezes in various situations. Subtitles Added the ability to open the properties of an external subtitle renderer in the "Subtitles" settings panel. Fixed external subtitle connections for VSFilter. Fixed a crash when rendering PGS/SUP subtitles when using AVX2. YouTube Improved support for yt-dlp. The built-in YouTube parser is no longer used. Player The HTTP read strategy has been changed. If the playlist contains one entry, more key combinations can be used to control the player (jump through chapters, adjust volume). Improved support for reading ASX playlists. The translation of the MediaInfo report for Chinese, Korean and Japanese has been removed. Added blocking of 32-bit filter "PICVideo Lossless JPEG Decompressor" (pvljpg20.dll), because it crashes. Added blocking of the system filter "AVI Decompressor", which will eliminate the crash of VFW codecs. Fixed a rare crash when using the "/slave" key. Fixed a crash when getting a list of fonts for OSD. Added the ability to load an external audio file using hotkeys. Fixed opening a network path starting with \?\UNC. The "Determine duration when adding" playlist setting now works for YouTube video URLs. The "Online media services" settings panel has been redesigned. Added a "Merge files using FFmpeg" option to the file saving dialog. This option is activated when playing multiple streams obtained using yt-dlp. Added loading of local .dpl playlists ("DAUMPLAYLIST"). Fixed a hang when the user closes the player during the URL opening process. Various interface fixes. Installer Updated MPC Video Renderer 0.10.5. Updated MPC Script Source 0.2.17. Added MPC Image Source 0.3.6. Translations Updated Japanese translation (by tsubasanouta). Updated Chinese (Traditional) and Dutch translation (by beter). Updated Romanian translation (by Andrei Miloiu). Updated Hungarian translation (by mickey). Updated Turkish translation (by cmhrky). Updated German translation (by Klaus1189). Updated Chinese (Simplified) translation (by wushantao). Updated Italian translation (by mapi68). Updated Korean translation (by Hackjjang). Updated Chinese (Traditional) (by udfbe). Updated libraries dav1d 1.5.3-6-g04b69f9; ffmpeg n8.2-dev-1857-g4653e68aab; libpng git-v1.6.55-9-g7d52a8087; Little-CMS git-lcms2.18-26-gf739cda; MediaInfo git-v26.05-38-g702c9b7fd; ZenLib git-v0.4.41-91-g073f297; zlib 1.3.2. Download: MPC-BE 64-bit | Portable MPC-BE 64-bit | ~20.0 MB (Open Source) Download: MPC-BE 32-bit | Portable MPC-BE 32-bit Link: Media Player Classic - BE Home Page Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Apple reportedly looks to blacklisted Chinese memory chips as RAM prices climb by Karthik Mudaliar Image via Apple Apple is reportedly trying to get a clearance from the Trump administration to buy memory from ChangXin Memory Technologies (CXMT) to get some relief from soaring DRAM prices. As per a report by the Financial Times, Apple approached the Commerce Department more than a month ago and also spoke to other officials and allies in Washington. For starters, CXMT is a company that's already been placed on the Pentagon's list of Chinese military companies. The Chinese company is the country's top DRAM maker. For Apple, the timing is certainly awkward but not surprising. Tim Cook had recently warned that Apple would have to raise prices because AI companies are buying up large amounts of memory for data centers, and just like that, Apple raised MacBook and iPad prices. Micron also recently revealed that customers have committed billions of dollars to secure memory supply years in advance, which shows us how aggressive securing infrastructure has become. This gives suppliers such as Samsung, SK Hynix, and Micron more leverage, while pushing hardware makers to look for alternatives. CXMT is one of those alternatives, but not the simplest one. Apple has spent many years trying to diversify parts of its supply chain away from China, especially for final assembly, while still depending heavily on Chinese manufacturing and suppliers. Even domestic brands from China are moving towards CXMT and YMTC instead of relying on Samsung, Micron, and SK Hynix. For Apple, though, it would invite more scrutiny than local Chinese companies. For now, this is more like a lobbying effort rather than a confirmed supply deal. There's no official statement from either of the parties. What is clearer, though, is the pressure behind such a request. AI demand has certainly made hardware a bottleneck, and companies are trying everything they can to bring things back to normal, even if that means making politically sensitive choices. Source: Financial Times
  • Recent Achievements

    • Week One Done
      flexorcist earned a badge
      Week One Done
    • One Month Later
      Woland13 earned a badge
      One Month Later
    • Week One Done
      Woland13 earned a badge
      Week One Done
    • One Year In
      bernmeister earned a badge
      One Year In
    • Week One Done
      Scoobystu earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      493
    2. 2
      +Edouard
      227
    3. 3
      PsYcHoKiLLa
      148
    4. 4
      Steven P.
      75
    5. 5
      FloatingFatMan
      70
  • Tell a friend

    Love Neowin? Tell a friend!