Steam: alternative installation locations now available


Recommended Posts

One of the main complaints that many gamers have in regards to Valve Software?s popular Steam gaming platform is the limitation to one installation directory and partition. While you can use some magic, in form of programs like Steam Mover to move some folders to another drive, it was not something that a lot of Steam users knew about.

If you have been running out of disk space on the drive Steam was installed on, you were left with the choice to uninstall one of your installed games to make space for the new game, or move the entire Steam games library to another drive on your computer.

Valve finally seems to have come to their senses. When you run a game installation on Steam now, you will be presented with an ?choose drive to install to? option. You can use the option to create a secondary Steam library on another drive that is connected to the computer locally.

steam-change-game-installation-directory.png

Please note that you only see the option if the system has another partition or hard drive that is accessible under its own drive letter. You won?t get that option if you only have one partition on the system.

A click on ?create new Steam library on drive x:\? opens a configuration menu where you can select the Steam library folder location on the drive. You need to create a folder for the new Steam library as you can?t select the drive root as the location.

steam-create-new-library.png

Steam goes back to the game installation screen afterwards and displays the newly selected path under the installation options. The game is then downloaded and installed as usual on the system.

It feels strange that it took Valve that long to integrate secondary game libraries into Steam. The rise of Solid State Drives may have convinced the company to give it a shot, considering that you can?t save lots of games on an average SSD.

Source

Yea noticed this after the last update and went "cool".

I solved it in the past by just installing steam on the HDD and not my SSD at all.

Not sure why it took YEARS for that option.

Probably a lot to do with the DRM really.

  • Like 2

This has been in the past couple of updates...but yeah, it is pretty cool. I have Steam installed on my 80 GB SSD, and 80 GB isn't a whole lot of space for games. So, I ended up creating a library on one of my HDD's to store what I can't fit on the SSD.

Probably a lot to do with the DRM really.

Actually, probably a lot to do with this:

Some games don't seem to offer to install on another HDD, for example Borderlands has no option, whereas GTA IV does.

Why is this?

GTA IV uses Steam's new-ish HTTP-based content delivery system, which also uses a new file manifest format (ACF files vs GCF/NCFs), Borderlands probably still uses the old NCF-based system which doesn't have the flexibility to be installed out of location.

Actually, probably a lot to do with this:

GTA IV uses Steam's new-ish HTTP-based content delivery system, which also uses a new file manifest format (ACF files vs GCF/NCFs), Borderlands probably still uses the old NCF-based system which doesn't have the flexibility to be installed out of location.

Not sure I agree with that. As my Steam install resides on D: and I have never had issues.

Alittle bit late.

Yesterday, I have just extended my C Drive and changed the partitions sizes just in order to make room for more steam games.

I should have waited for a day

Steam finally realized people had more then one hard drive with their games on them as they needed more space. I've tried to keep my primary OS separate from my games, movie files for years. It's about time.

I do this very radically.Simply, I use my main OS as Ubuntu and 2ry OS for games is win7.Altough, Ihave an Xbox 360 Slim already.

Not sure I agree with that. As my Steam install resides on D: and I have never had issues.

I think you're confusing Steam install location with library install location(s), you could install Steam to any drive you want - but any files would have to be within steamapps\common\.

I think you're confusing Steam install location with library install location(s), you could install Steam to any drive you want - but any files would have to be within steamapps\common\.

Any installed game files... save files / profiles could end up all of the place.

Wonder if you can do this with folders on a home server, would be cool if more than one PC could use the same game folder on a central computer, would have to be gigabit network and a very fast drive obviously.

My Steam folder is now up to 1.6TB and contains over one million files. I've got it on a dedicated 3TB hard-drive and I'm on Windows 8, so if it gets too large I'll add another drive to my Storage Spaces array and transfer it across.

Any installed game files... save files / profiles could end up all of the place.

Saves/profiles aren't really relevant in this context, the point is that the old system very likely depends on the launcher / base files (moreso for Steamworks titles) existing within the common folder under the Steam install path.

The new format probably has entries for custom library locations that the old didn't. The GCF/NCF file formats are very old, and date back to the original release of HL2 in 2004.

My Steam folder is now up to 1.6TB and contains over one million files. I've got it on a dedicated 3TB hard-drive and I'm on Windows 8, so if it gets too large I'll add another drive to my Storage Spaces array and transfer it across.

Err, congratulation for hoarding games you'll never actually play and junking up your file system? Heh.

I tried this in the Bootstrapper beta they decided to postpone. It didn't work the greatest so I decided to hold off til a final release...now that it's in release I have plenty of space so I'm not terribly concerned.

Err, congratulation for hoarding games you'll never actually play and junking up your file system? Heh.

Modern file systems are perfectly capable of handling such data loads. If I want to play any game then I just launch it from Steam and it's up and running - no downloading, no delay. I often play older random games when I get bored. For instance, the other day I loaded up the original Crysis to take screenshots and I did the same with Aliens Versus Predator. If I kept deleting games that I hadn't played for years then I'd be constantly redownloading them and having to wait before playing them.

If I wanted gaming to be inconvenient and time consuming then I would have bought a console. I can afford the hard-drive capacity so I might as well use it, as I have over 13.5TB of storage and will probably add another 4TB at some point.

I think you're confusing Steam install location with library install location(s), you could install Steam to any drive you want - but any files would have to be within steamapps\common\.

Not confusing, just saying I don't see what his post of games not supporting alternative drives really means. As, the games already supported being installed on a drive other than C as long as Steam was also installed there.

Not confusing, just saying I don't see what his post of games not supporting alternative drives really means. As, the games already supported being installed on a drive other than C as long as Steam was also installed there.

No, you are confusing the ability to install Steam to any drive with the ability for Steam to install different games to multiple drives.

The old content system is not capable of this feature, the new one however has it built-in. Hence why Borderlands doesn't have the prompt while GTA4 does as the guy I quoted mentions.

Not confusing, just saying I don't see what his post of games not supporting alternative drives really means. As, the games already supported being installed on a drive other than C as long as Steam was also installed there.

Steam on C, Counter Strike on C, Skyrim on C, Farcry 3 on D.

That's what's new.

This topic is now closed to further replies.
  • Posts

    • So they saved ton of money by using AI resulting in loss of crap load of money in recalls and expenses. Bravo. Management needs to be replaced by AI, not engineers.
    • Ditto that, I have a few Alexa devices around the house to control lighting and such for a disabled person I live with, and it shows a *lot* of ads on the display. The dots are simple but effective. A lot cheaper too.
    • Go for a Echo Dot or Pop instead. These Echo shows just advertise to you.
    • NetSpeedTray 1.3.3 by Razvan Serea NetSpeedTray is a lightweight, open-source Windows network monitor that shows live upload and download speeds directly on the Taskbar. Designed for efficiency, it quietly sits in the system tray, conserving CPU and battery with dynamic updates. It blends seamlessly with Windows 10/11, adapts to light/dark themes, and auto-positions to avoid overlaps. Features include accurate interface detection, customizable display, optional mini-graph, color coding, granular font and unit control, detailed per-interface history graphs, safe data management, and easy CSV export—bringing the network monitoring Windows forgot. NetSpeedTray key features: Lightweight & Efficient Runs quietly in your system tray without consuming resources. Features a "Dynamic Update Rate" that lowers refresh frequency when the network is idle to save CPU and battery life. Native Look & Feel Blends seamlessly with Windows 10/11 UI. Smart detection for light and dark taskbar themes ensures text is always visible. Intelligent & Adaptive Positioning Automatically finds empty space next to your system tray and shifts to make room for new icons, preventing overlaps. Seamless OS Integration Behaves like a native Windows component. Hides instantly with auto-hiding taskbar Hides when a fullscreen app is active Smart Network Monitoring Accurate by Default: Auto mode identifies your main internet connection and ignores noise from VPNs or virtual adapters. Easy Interface Selection: Switch effortlessly between Auto, All, or Selected network interfaces via intuitive radio buttons. Total Visual Customization Free Move Mode: Unlock and place the widget anywhere on your screen. Optional Mini-Graph: Real-time graph of recent network activity with adjustable opacity. Color Coding: Customize colors and speed thresholds to quickly see network status. Granular Display Control Text & Font: Adjust font family, size, weight, and alignment. Units: Automatic (B/s, KB/s, MB/s) or fixed Mbps display. Precision: Set decimal places and always show them for uniform appearance. Detailed & Intelligent History Graph Smart Scale: Logarithmic scale shows low-level traffic and large spikes clearly. Per-Interface Filtering: View speed history for specific adapters (Wi-Fi, Ethernet, VPN). Safe & Efficient Data Management: Adjustable retention, automatic cleanup, optimized database. Easy Data Export: Export raw data to .csv or save high-quality graphs for reports. NetSpeedTray v1.3.3: The Updater Fix A stabilization release that repairs a critical regression in v1.3.2: the app shipped without OpenSSL, which silently broke every HTTPS request — including the built-in update checker (the "Could not check for updates" error many of you hit). This release restores it, hardens the build so it can't happen again, and fixes a startup crash plus four other reported bugs. Changes: Fixed update checking — Resolved a critical issue that prevented the app from checking for updates ("Could not check for updates"). Fixed startup crash with Auto-Cycling — The app no longer crashes on launch after enabling Cycle display mode. Fixed incorrect network speeds on 10GbE adapters — Multi-gigabit network cards now display speeds correctly instead of being stuck at 0. Improved color coding — Default color is shown when idle, and color/threshold changes now apply immediately without restarting. Fullscreen visibility fix — The widget now correctly stays visible over fullscreen apps when Keep Visible is enabled. Improved AMD Ryzen temperature detection — More reliable CPU temperature monitoring for Ryzen processors. Cleaner upgrades — Installer now removes outdated application files during upgrades, preventing DLL/version conflicts while preserving user settings. Improved stability — Fixed potential DLL loading issues by excluding critical OpenSSL and NumPy components from UPX compression. Better settings window — Scrollbars removed and layout improved for a cleaner experience. Localization improvements — Updated translations and completed missing UI text across all supported languages. More reliable releases — Added regression tests covering recent critical fixes, bringing the test suite to 196 passing tests. [full release notes] Download: NetSpeedTray 1.3.3 | 87.9 MB (Open Source) Download: NetSpeedTray Portable | 101.0 MB View: NetSpeedTray Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • One Year In
      bernmeister earned a badge
      One Year In
    • Week One Done
      Scoobystu earned a badge
      Week One Done
    • Week One Done
      tuben earned a badge
      Week One Done
    • First Post
      OffsetAbs earned a badge
      First Post
    • Reacting Well
      OffsetAbs earned a badge
      Reacting Well
  • Popular Contributors

    1. 1
      +primortal
      473
    2. 2
      +Edouard
      220
    3. 3
      PsYcHoKiLLa
      156
    4. 4
      Steven P.
      73
    5. 5
      FloatingFatMan
      71
  • Tell a friend

    Love Neowin? Tell a friend!