pondering over getting a 2nd 7970


Recommended Posts

Are you running the latest 12.11 Beta 8 drivers and latest CAP 2? You should be getting better FPS than that, I average about those speeds sometimes more with everything maxed out except for AA

I will never go CFX again, when it works its great, but that is a rare phenomenon, most things had better FPS with 1 card when I was running 2 x 6850s

Personally, investing in a better single card is the better option, but you shouldn't be having many issues with a 7970, new games and beta drivers are the problem here imo

If you were gaming at 2560x1600 then I'd recommend it but you'd be pretty much buying a second card for just Far Cry 3. You're better off dialling back anti-aliasing to 4x and then waiting for a patch or two and a driver update. I have a GTX680 SLI setup and can only run 2x AA at 2560x1600, plus I get framerate drops. At this point I'm inclined to think that performance will improve, given that the previous nVidia driver update increased performance by up to 38% - that suggests the drivers were very poorly optimised before and probably still are.

im running beta 11 drivers? remember i have AA on 8x too.

Beta 11, yea thats what I meant, we were stuck with Beta 8 for so long I forgot we had an update

Drop AA down halfway and your FPS should get a nice boost

Also check what you have AA set in CCC, I dropped mine to the lowest and just use in-game AA

farcry3_d3d11_2012_12_04_14_11_37_526.png

farcry3_d3d11_2012_12_04_15_38_33_655.png

hmmm, i have a decent enough cooler. is it best to manually OC, or use some asus sofware. any reccoemnedations ot tips? its been a while since i OC anything.

rest of my rig:

CPU - AMD FX-6 6100 Black Edition 6 Core 3.3Ghz Socket AM3+ 8MB L3

MOBO - ASUS Sabertooth 990FX Socket AM3+ 8 Channel Audio ATX

GPU - AMD HD 7970

RAM - 8GB DDR3 1600MHz

SSD- Corsair 120GB Force 3 SSD 2.5" SATA

OS - Win7 x64 Profesional

PSU - Corsair TX 850W V2 PSU

hmmm, i have a decent enough cooler. is it best to manually OC, or use some asus sofware. any reccoemnedations ot tips? its been a while since i OC anything.

rest of my rig:

CPU - AMD FX-6 6100 Black Edition 6 Core 3.3Ghz Socket AM3+ 8MB L3

MOBO - ASUS Sabertooth 990FX Socket AM3+ 8 Channel Audio ATX

GPU - AMD HD 7970

RAM - 8GB DDR3 1600MHz

SSD- Corsair 120GB Force 3 SSD 2.5" SATA

OS - Win7 x64 Profesional

PSU - Corsair TX 850W V2 PSU

I use the BIOS, easiest way is to bump up the Multiplier, it works in simple terms like this

FSB is 200MHz

Multiplier is x17

200x17 = 3.4GHz (That is my CPU config)

Bump the multiplier from x17 to x18 and you get another 200MHz = 3.6GHz or 3600MHz

Same if you up the FSB, 200>210 x 17 = 3570MHz

But increasing the FSB will also OC your RAM so best to stick with the multiplier unless you want to try OCing other things too

If you get a bluescreen or no boot, bump the CPU voltage up a tiny amount

My CPU from 3.4GHz to 4GHz = from 1.35v to 1.49v but always try to stabilize the OC with the least amount of voltage

  • Like 1

let us know how it goes - AMDs CPUs arent as powerful for gaming as Intels CPUs. That's a great processor, but i feel that it's still holding you back.

Get that CPU stable then check your fps. After that, just get another 7970 :shifty:

  • Like 1

well

let us know how it goes - AMDs CPUs arent as powerful for gaming as Intels CPUs. That's a great processor, but i feel that it's still holding you back.

Get that CPU stable then check your fps. After that, just get another 7970 :shifty:

I believe, if I can remember correctly, 6100, when overclocked to around 4.2 or 4.4 GHz was, then, able to match i3' performance

Do let us know anyway how it goes

I use the BIOS, easiest way is to bump up the Multiplier, it works in simple terms like this

FSB is 200MHz

Multiplier is x17

200x17 = 3.4GHz (That is my CPU config)

Bump the multiplier from x17 to x18 and you get another 200MHz = 3.6GHz or 3600MHz

Same if you up the FSB, 200>210 x 17 = 3570MHz

But increasing the FSB will also OC your RAM so best to stick with the multiplier unless you want to try OCing other things too

If you get a bluescreen or no boot, bump the CPU voltage up a tiny amount

My CPU from 3.4GHz to 4GHz = from 1.35v to 1.49v but always try to stabilize the OC with the least amount of voltage

well im currently at 4.11GHz and appears to be now stable after a couple of minor cranks of the voltage. i had only two freeze ups, mid game. no bsods. didnt take much additional voltage to get her stable either. May push her a little further tomorrow. added 0.4 onto my windows score too! think she will go further. but i'll be honest, cant say im noticing much if any increase in FPS in game!

well

well im currently at 4.11GHz and appears to be now stable after a couple of minor cranks of the voltage. i had only two freeze ups, mid game. no bsods. didnt take much additional voltage to get her stable either. May push her a little further tomorrow. added 0.4 onto my windows score too! think she will go further. but i'll be honest, cant say im noticing much if any increase in FPS in game!

Nice work :)

You will mainly see better FPS in games that are heavily CPU dependant and/or your CPU was, in the first place the bottleneck, nothing bad about gaining over 700MHz on your CPU for free though ;)

Prime95 is one of the favourites for CPU stability, personally I gage it on real life use, if I can use my machine 100% with no problems, then it is 100% stable for me, P95 will crash the most stable machines

But also, I have seen OC's pass hours of P95 only to crash during gaming so take it as you will :)

Nice work :)

You will mainly see better FPS in games that are heavily CPU dependant and/or your CPU was, in the first place the bottleneck, nothing bad about gaining over 700MHz on your CPU for free though ;)

Prime95 is one of the favourites for CPU stability, personally I gage it on real life use, if I can use my machine 100% with no problems, then it is 100% stable for me, P95 will crash the most stable machines

But also, I have seen OC's pass hours of P95 only to crash during gaming so take it as you will :)

Is there a better AMd CPU that would benefit me without swapping out my mobo? better of with a phenom II?

well im currently at 4.11GHz and appears to be now stable after a couple of minor cranks of the voltage. i had only two freeze ups, mid game. no bsods. didnt take much additional voltage to get her stable either. May push her a little further tomorrow. added 0.4 onto my windows score too! think she will go further. but i'll be honest, cant say im noticing much if any increase in FPS in game!

i read this Techspot article the other day. They compare the fps increase by overclocking the cpu in FC3. Check it out and take it for what it's worth.

http://www.techspot.com/review/615-far-cry-3-performance/page6.html

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Password Safe 3.72.0 by Razvan Serea Password Safe is a password database utility. Like many other such products, commercial and otherwise, it stores your passwords in an encrypted file, allowing you to remember only one password (the "safe combination"), instead of all the username/password combinations that you use. Once stored, your user names and passwords are just a few clicks away. Using Password Safe you can organize your passwords using your own customizable references—for example, by user ID, category, web site, or location. You can choose to store all your passwords in a single encrypted master password list (an encrypted password database), or use multiple databases to further organize your passwords (work and home, for example). And with its intuitive interface you will be up and running in minutes. PasswordSafe was originally designed by the renowned security technologist Bruce Schneier and released as a free utility application. Password Safe 3.72.0 changelog: Fixed bugs Improved font scale handling - should resolve font size issues on high resolution displays. GH1749 In the Master Password Setup window, "Show Master Password" is no longer truncated on some displays. GH1092, SF1595 Size and position of main window is now correctly restored on scaled displays. SF1630 Keep password expiry date when both password and password expiry are changed; don't clear a non-recurring expiry when the password's changed. SF1628 Custom values can now be copied to the clipboard in read-only mode via Ctrl-C and right-click->Copy Value. New features GH1196 Dark display mode support: Password Safe now supports the system display mode, as well as setting the mode directly via Manage->Options->Display->Display Mode. This change also updates the general "look & feel" of the app to the current Windows theme. Known limitations: The Date picker and keyboard shortcut controls do not switch to dark theme The Customize Toolbar dialog does not switch to dark theme Custom Field support has been added to the more advanced features: Filters XML and Text import and export Comparison, Sync and Merge databases SF938 Custom field values may now be selected by name and copied via a "Copy Custom Field Value..." submenu in the entry context popup menu. SF936 Notes and Custom fields layout now overlap, selectable by tabs, resulting in a more compact and less cluttered layout. SF935 Autotype: Specifying '\v{name}' in the autotype text will cause the corresponding value to be autotyped. Download: PasswordSafe 64-bit | Portable 64-bit | ~20.0 MB (Open Source) Download: PasswordSafe 32-bit | Portable 32-bit View: PasswordSafe Website | Quickstart Guide | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Google DeepMind published a document on June 18, 2026, that may be the most consequential admission yet from a frontier AI lab: alignment training alone cannot guarantee that AI agents will remain under human control, so structural containment must be built before more capable models arrive.............. https://www.techtimes.com/articles/318758/20260620/google-deepmind-ai-control-roadmap-when-alignment-fails-defense-depth-takes-over.htm  
    • I've got a SoundBlasterX G6 that I use in my streaming setup. Sounds great to me and I've had zero issues with the ancient software package so far in Win11. That G6 has 7.1, Dolby, fully working SPDIF and since it's a USB device it's outside of my rig so I don't have to worry about EMF distortion. Looks like for now this is a pass for me as I think I have better hardware....
    • How do you connect 5.1 Speakers to this thing?
    • I agree with both of you... It's absolutely imperative that science is completely based on actual proven facts and hard evidence and is not considered dogmatic in any way. Science is not a religion and it will never be, and that's exactly how it's supposed to be.
  • Recent Achievements

    • Dedicated
      JuvenileDelinquent earned a badge
      Dedicated
    • First Post
      DrWankel earned a badge
      First Post
    • Reacting Well
      DrWankel earned a badge
      Reacting Well
    • Week One Done
      Supreme Spray LV earned a badge
      Week One Done
    • Week One Done
      Genuinetonerink- Dubai earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      502
    2. 2
      +Edouard
      170
    3. 3
      PsYcHoKiLLa
      88
    4. 4
      Steven P.
      75
    5. 5
      Michael Scrip
      73
  • Tell a friend

    Love Neowin? Tell a friend!