Help me upgrade my system please!


Recommended Posts

In looking for a better video card, it was recommended that I upgrade my PSU. After reading and researching, I suspect that this is what led my last computer to stop functioning and eventually ruining the other parts in it. So I want to find a better card and also a better PSU to prevent that from happening again

My mobo: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02560084&lc=en&cc=ad&dlc=en

Specs:

AMD Phenom II X6 1045T

16GB DDR3 RAM (1333 MHz)

Two DVD-RWs

120GB Kingston HyperX 3K SSD

1.5 TB HDD

I currently have a 300W factory PSU. I'm very unfamiliar with finding out how many amps I have on the 12V rail. I am familiar with taking out the PSU if need be, checking the BIOS, etc.

I am looking to find a card that does up to four monitors. I don't do gaming and honestly the most graphic intensive thing I'd ever do is run an N64 emulator with high-res textures. I have two 23" Acer monitors (1920x1080) with VGA and DVI.

I thought I'd ask the knowledgeable folks here first because I don't want to buy something and then realize it's not compatible or more than I need. Thank you!

Link to comment
https://www.neowin.net/forum/topic/1125480-help-me-upgrade-my-system-please/
Share on other sites

You have a few problem:

Yes you will need a better PSU but the case you have may have problems fitting it less use you know it will fit ATX size plus room for cables.

Then you have to fit a card in that case if there is enough room.

And lastly up to four monitors on one card...not sure that?s going to be cheap.

I think the NVidia is the best right now. You'll want a 500 watt PSU though.

NVIDIA won't get him 4 screens...

And I think a 650W will be better for him.

In looking for a better video card, it was recommended that I upgrade my PSU. After reading and researching, I suspect that this is what led my last computer to stop functioning and eventually ruining the other parts in it. So I want to find a better card and also a better PSU to prevent that from happening again

My mobo: http://h10025.www1.h...en&cc=ad&dlc=en

Specs:

AMD Phenom II X6 1045T

16GB DDR3 RAM (1333 MHz)

Two DVD-RWs

120GB Kingston HyperX 3K SSD

1.5 TB HDD

I currently have a 300W factory PSU. I'm very unfamiliar with finding out how many amps I have on the 12V rail. I am familiar with taking out the PSU if need be, checking the BIOS, etc.

I am looking to find a card that does up to four monitors. I don't do gaming and honestly the most graphic intensive thing I'd ever do is run an N64 emulator with high-res textures. I have two 23" Acer monitors (1920x1080) with VGA and DVI.

I thought I'd ask the knowledgeable folks here first because I don't want to buy something and then realize it's not compatible or more than I need. Thank you!

Get a corsair psu 500 or more and you will notice a huge improvement in stability! I messed around will all the top brands and wattages with a daul card setup and the corsair has worked the best for more then ten custom built systems.

That card will not play PD..

Use 3 monitors on your 6450 (It allows it with two DVI/HDMI and DisplayPort (which has adapters) and use a USB to DVI adapter.

From the reviews everywhere, the card looks like some caca. I have a Radeon HD 6450 now but it looks like it's a gimped version as mine has one HDMI and one DVI. I found a pretty cheap version of it that has two DVI ports and an HDMI and supports triple monitors out of the box (several Newegg reviews confirm it doesn't need the Eyefinity dongle).

Now I just need to plug my stuff into a PSU calculator to see how much I'd need.

Alright, any good recommendations based on the Mobo? I know I need to make sure I have the right amperage and that was my main reason for wanting to use one. Extreme PSU Calc seems to be the only one that people recommend at Tom's Hardware.

Also, can you tell what type of pin connector I have?

http://h10025.www1.hp.com/ewfrf-JAVA/Doc/images/761/c02560806.jpg

I count 24, but I'm not sure if they're all "active".

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • The possibility that milk gathers back into a glass implies that gravity can be 'reversed'.
    • VidCoder 12.20 by Razvan Serea  VidCoder is a DVD/Blu-ray ripping and video transcoding application for Windows. It uses HandBrake as its encoding engine. Calling directly into the HandBrake library gives it a more rich UI than the official HandBrake Windows GUI. VidCoder can rip DVDs but does not defeat the CSS encryption found in most commercial DVDs. You’ll need the NET 8 Desktop Runtime. If you don’t have it, VidCoder will prompt you to download and install it. The Portable version is self-contained and does not require any .NET Runtime to be installed. You do not need to install HandBrake for VidCoder to work. Feature list: Multi-threaded MP4, MKV containers Completely integrated encoding pipeline: everything is in one process and no huge intermediate temporary files H.264, H.265, MPEG-4, MPEG-2, VP8, Theora video Hardware-accelerated encoding with AMD VCE, Nvidia NVENC and Intel QuickSync AAC, MP3, Vorbis, AC3, FLAC audio encoding and AAC/AC3/MP3/DTS/DTS-HD passthrough Target bitrate, size or quality for video 2-pass encoding Decomb, detelecine, deinterlace, rotate, reflect, chroma smooth, colorspace filters Powerful batch encoding with simultaneous encodes Customizable Pickers to automatically pick audio and subtitle tracks, destination, titles and more Instant source previews Creates small encoded preview clips Pause, resume encoding VidCoder 12.20 changes: Updated HandBrake core to 1.11.2. Download: VidCoder 12.20 | 47.0 MB (Open Source) Download: Portable VidCoder 12.19 | 89.3 MB Link: VidCoder Home Page | Github | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Too soon, I'm still not over this death!
    • Normally, I admit when a title is clickbait (unfortunately, it's become somewhat necessary to compete against AI-dominated news sections today), but in this case, all supported versions is implied and doesn't need to be spelled out in the title. Of course, I'm covering a Patch Tuesday update bug that is only available to supported Windows SKUs. All our coverage relates to supported Windows software and SKUs only unless we expressly state that it's "unsupported", "unofficial", or "third-party". I'm sorry, but supported/official SKUs don't need to be spelled out as such in every Neowin headline.
  • Recent Achievements

    • Week One Done
      Jordan Smith earned a badge
      Week One Done
    • Reacting Well
      BizSAR earned a badge
      Reacting Well
    • First Post
      AndreaB earned a badge
      First Post
    • Week One Done
      Huge Trailer earned a badge
      Week One Done
    • Week One Done
      Classifyskilleducation earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      593
    2. 2
      +Edouard
      185
    3. 3
      PsYcHoKiLLa
      77
    4. 4
      Michael Scrip
      73
    5. 5
      Steven P.
      66
  • Tell a friend

    Love Neowin? Tell a friend!