Recommended Posts

Hey all,

Basically looking to replace my Google Apps accounts with an on Prem Exchange 2013 box at home. I understand that most of my mail would be bounced due to running on a Dynamic IP.

Anyone recommend any decent services that will forward my mail on to a Dynamic IP? (With the ability to store mail in case of server outage if possible)

Thanks for your help!

Link to comment
https://www.neowin.net/forum/topic/1125880-email-server-on-a-dynamic-ip/
Share on other sites

There are plenty of Dynamic DNS services that'll do what you want (http://en.wikipedia....iki/Dynamic_DNS, http://dnslookup.me/dynamic-dns/).

I can't recommend an actual service however as I haven't had much experience with them.

He is asking for more than just dynamic dns services, this is what it sounds like what he wants

http://dyn.com/email/dyn-email-backup-mx/

We offer backup queuing for unexpected downtime on a main MX server for 10 days, storing and forwarding when you're ready.

So basically they are a secondary MX record for your domain, with a lower priority than your main MX. So if your down, others would send to this MX, they will then store the mail until your primary MX record is back online - and then send you the mail to your primary mx.

So you do understand from this statement

"most of my mail would be bounced due to running on a Dynamic IP."

That you will not be able to send mail to the major players right - yahoo, gmail, hotmail, etc.. Most all of them will not accept mail from a dynamic IP listed IP.

Connected to mailin-03.mx.aol.com.

Escape character is '^]'.

554- (RTR:DU) http://postmaster.info.aol.com/errors/554rtrdu.html

554 Connecting IP: 24.13.xx.xx

554 RTR:DU[/url]

Now if your going to go with a backup MX service - might as well go with a delivery service as well ;)

http://dyn.com/email/dyn-standard-smtp/

They also mention in the above link the other reason you can not send mail to major players from a home/dynamic IP - your not able to set the rDNS (ptr) Many major players don't accept mail from them either.

DNS Blocks

of your IP Address is typical of a dynamic/residential IP Address. Please have it updated to something unique like mail.example.com, or use the mail servers your ISP provides for residential customer traffic. If the rDNS has been updated and the problem persists, please open a support request.

[*]554 DNS:B2

[*]421 DNS:NR

Now if all you want to do is accept incoming mail, and not be able to respond or send to major domains, or any domain that uses standard filtering practices.. Sure go right ahead and run your own email server.. Have fun securing from being an open relay, fighting spam, etc

Thanks a lot for the hefty response BudMan, thats the exact thought of thing I was looking for :)

If I'm not mistaken, I've got access to an SMTP server to relay with (Through One and One) so was just planning on setting up a send connector within Exchange for that (Correct me if I'm wrong?)

The main thing I was worried about was receiving incoming mail on a Dynamic IP.

Thanks again for all your help!

If you going to use a smart host for sending, then you should be fine. Still have to worry about being an open relay, spam though if your going to be accepting email on your dynamic.

Here is the thing, maybe your isp is different - but I am on a dynamic, and been same for years at a time. Unless you go offline for extended period, days! You should just keep renewing the same dhcp lease. Unless you change your mac of the device your isp dhcp server sees there should be no reason your ip should change.

Now that I am running my router in vm, I have its mac set to specific one. I can change over to any VM instance as my router and as long as use that same mac I have the same public IP, etc.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Wow, Microsoft IS cooking lately... This only shows that they COULD improve, they just chose not to for whatever reasons. That obsession with AI was destroying them from the inside out.
    • BATorrent 4.1.0 by Razvan Serea BATorrent is a lightweight, open-source BitTorrent client built with modern C++ and Qt 6, offering a clean, fast, and privacy-focused alternative to traditional torrent apps. It supports magnet links, .torrent files, resume data, sequential downloading, per-file priorities, and even imports from qBittorrent. Power users benefit from integrated RSS auto-download with regex filtering, duplicate detection, and automatic tracker lists from Stremio. Streaming is seamless thanks to auto-detected players like VLC and IINA. BATorrent includes robust VPN tools—interface binding, auto-detection for WireGuard-based services like Mullvad and NordLynx, kill switch, proxy support, and IP filtering. A full WebUI enables remote control, while integrations with Plex, Jellyfin, and Emby automate library updates. With themes, speed scheduling, system-tray alerts, and cross-platform support for Windows, Linux, and macOS, BATorrent delivers a polished, high-performance torrenting experience. BATorrent features: Core .torrent file and magnet link support Resume data — picks up where you left off after restart Import torrents from qBittorrent Create .torrent files from any file or folder Sequential download mode Per-file priority control (skip, low, normal, high) Seed ratio limits with auto-pause DHT, PEX, UPnP, NAT-PMP RSS Auto-Download Subscribe to RSS feeds — automatically download new torrents as they appear Regex filters — match only what you want (e.g. 1080p|720p, S01E\d+) Per-feed settings — custom save path, check interval (5–1440 min), enable/disable Auto-download — matched items are downloaded automatically in the background Supports magnet links, .torrent URLs, and tags Tray notifications when items are auto-downloaded Duplicate detection — never downloads the same item twice Stremio Stremio Addon System pre-installed — works out of the box Auto tracker list from ngosang/trackerslist Streaming Play while downloading — stream video files before the download is complete Supports mp4, mkv, avi, mov, wmv, flv, webm, m4v, ts Auto-detects installed players (VLC, IINA, system default) VPN & Privacy Interface binding — lock torrent traffic to a specific network interface (e.g. tun0) Auto VPN detection — identifies VPN interfaces (tun, tap, WireGuard, Mullvad, NordLynx, ProtonVPN) Kill switch — automatically pauses all torrents if the VPN interface drops Auto-resume — resumes only the torrents paused by the kill switch when VPN reconnects Proxy support — SOCKS5 and HTTP proxy with optional authentication IP filtering — load P2P blocklists to block unwanted IP ranges Protocol encryption (enabled / forced / disabled) WebUI Remote management — control torrents from any browser at http://localhost:8080 REST API with JSON responses Add torrents via magnet link or .torrent upload Pause, resume, remove torrents remotely View peers and files per torrent Dark theme matching the desktop app HTTP Basic Auth with SHA-256 password hashing Configurable port and remote access (localhost vs 0.0.0.0) Interface 3 themes: Dark, Light, Midnight (bat/vampire aesthetic) Real-time speed graph Detailed panel with tabs: General, Peers, Files, Trackers Filter bar: search by name, filter by state (Active, Downloading, Seeding, Paused, Finished) Drag & drop .torrent files and magnet links Drag & drop reorder in torrent list System tray with notifications (download complete, kill switch events, RSS auto-downloads) Splash screen with bat animation Bilingual: English and Portuguese (BR), auto-detected from system locale Bandwidth Scheduler Alternative speed limits — set different download/upload limits on a schedule Time range — configure active hours (e.g. 01:00 to 07:00), supports overnight ranges Per-day control — choose which days of the week the schedule applies Automatically switches between normal and alternative speeds Media Server Integration Plex — automatically trigger library scan when a download completes Jellyfin / Emby — same automatic library refresh via API Configure server URL and authentication token/key in Settings System Cross-platform: Windows, Linux, macOS Auto-shutdown — automatically shut down PC when all downloads complete (60s cancellable countdown) Auto-update system (AppImage on Linux, installer on Windows, DMG on macOS) CLI arguments: pass .torrent files or magnet: URIs directly Keyboard shortcuts: Space to toggle pause, Ctrl+A to select all, Ctrl+O to open BATorrent 4.1.0 release notes: A community-driven release: everything here came straight from your reports and requests. It closes the remaining gaps with qBittorrent and fixes the Windows settings/tray/splash issues several of you hit. Fixed Settings now actually save. A whole class of preferences — speed limits (and the alternative limits), max active downloads, seed ratio, listen port, max connections, DHT/uTP/encryption, VPN interface, kill switch and proxy — weren't being persisted and reset to defaults on every launch. They now round-trip correctly. (Thanks to everyone who reported "the upload limit always goes back to 0".) Splash and tray toggles stick on Windows. Turning off the startup animation (or "close to tray") no longer reverts — the Windows registry stored these booleans as integers and the UI was misreading them. Close-to-tray hint. The first time the window hides to the tray you get a one-time notification, so the app doesn't look like it vanished (Windows 11 tucks new tray icons into the overflow). macOS Dock icon size. The icon filled its canvas edge-to-edge and rendered larger than neighbouring apps; it now uses the standard safe-area padding. Native file picker language. The "Torrent file / All files" filter in the open dialog follows the app language instead of being hard-coded. Added — qBittorrent parity Alternative speed limits toggle — a turtle button in the toolbar flips your throttled limits on/off instantly, independent of the scheduler. Follow system theme — switch light/dark automatically with the OS (Settings → Appearance). Pre-allocate disk space — reserve the full file size up front to reduce fragmentation (Settings → Downloads). Recheck data on add — optionally force a hash check when adding a torrent, so existing or partial files on disk are detected. Port status indicator — a 🔴 dot in the status bar shows whether your listen port looks reachable (UPnP/NAT-PMP + listen state; fully local, no external check). Add torrent from URL — File → Add torrent from URL (Ctrl+U) fetches a remote .torrent and routes it through the normal add dialog. Export .torrent — right-click a torrent → Export .torrent to save its metadata file. Already there (in case you missed it) Watch folder — auto-add .torrent files dropped into a monitored directory (Settings → Files). This release just surfaces it. Incomplete files already carry a .!bt suffix until they finish. Under the hood Regression tests for the settings-persistence and Windows boolean bugs. A new Qt Quick Test harness covering the startup splash and the design-system widgets. Download: BATorrent 4.1.0 | 37.5 MB (Open Source) Download: BATorrent Portable | 51.7 MB Links: BATorrent Website | Screenshot | Changelog Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Disabling open on hover, great! That was so stupid! They need to do a fix, where if a network share is disconnected, it doesn't hang when opening "This PC" for 20 seconds.
  • Recent Achievements

    • Very Popular
      AndrewSteel earned a badge
      Very Popular
    • Veteran
      Taliseian went up a rank
      Veteran
    • One Month Later
      Clizby earned a badge
      One Month Later
    • One Month Later
      Timaximus earned a badge
      One Month Later
    • Week One Done
      Timaximus earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      523
    2. 2
      PsYcHoKiLLa
      170
    3. 3
      +Edouard
      163
    4. 4
      Steven P.
      83
    5. 5
      ATLien_0
      78
  • Tell a friend

    Love Neowin? Tell a friend!