what ssd to buy


Recommended Posts

Hello guys, i am a little confused, i did a lot of research because it and tech is what i study and i still don't know what ssd i should choose between these four:

120gb Samsung 840 basic series, with the tlc nand memory

120gb Intel 330 series

120gb Kingston v300 series

120gb Kingston hyperx 3k

I am kinda low on budget that's why those are my available options, i would have preferred the Samsung 830 but it's not available anymore in my country.

Link to comment
https://www.neowin.net/forum/topic/1127854-what-ssd-to-buy/
Share on other sites

I would go with the Intel, i have seen better success with them, I have no experience with a samsung SSD and do not know anyone who has owned one and all 4 of the Kingston drives i have used did not last more than 8 months or so.

That Samsung uses a slower and cheaper NAND, so I'd stay away from that one.

Out of those 4, I'd recommend the Intel. It's the most reliable, but it's also the most expensive.

Other options would be the OCZ Agility 4, Corsair Crucial M4. (thanks tsupersonic :rofl:) The M4 is a very very good SSD and it's cheap, so if you can get that one, I'd recommend it.

Other options would be the OCZ Agility 4, Corsair M4. The M4 is a very very good SSD and it's cheap, so if you can get that one, I'd recommend it.

Crucial M4, not Corsair. I agree, Crucial M4 is also a great inexpensive drive.

Doesn't the 840 Pro versions use a different chip?

The only difference between the Pro and non-Pro is that the non-Pro uses TLC (triple level cell) NAND, which is slower and cheaper than the MLC NAND which the Pro uses.

More info: http://reviews.cnet.com/internal-hard-drives/samsung-840-120gb-ssd/4505-9998_7-35507727.html

The immediate downside is that it uses a SandForce controller, which is always iffy in terms of reliability. OCZ seemed to have solved it's problems with that controller via firmware, but I can't say for sure if Corsair had the same issues and remedies.

The other downside is that it uses Asynchronous NAND, which is quite a bit slower than Synchronous NAND.

It's a decent budget SSD, but you might as well spend the extra 10 quid and get that Crucial M4 which doesn't have either of those problems.

Anandtech says the TLC should be made up for with the MDX controller in the Samsung 840. I went with an 840 Pro anyways just to be on the safe side. The problem with Intel these days is that they're all using SandForce controllers too, even though it is customized, but we don't know exactly how much customized it really is.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Can you still click his nose in the about box?
    • In that case this product has no value to me. I'd rather use older Creative SB that were better in my opinion or onboard audio chip.
    • FxSound 1.2.9.0 / 1.2.10.0 Beta by Razvan Serea FxSound (formerly DFX Audio Enhancer / FxSound Enhancer) is now free, making high-quality audio enhancement accessible to everyone. Designed for all PC sound systems, from average setups to audiophile-grade equipment, it offers automatic or fully customizable processing. As automatic or customizable as you want, it utilizes the highest-grade processing to deliver more volume, better equalization, and a wider, deeper sound. For the serious audiophiles, FxSound gives you the tools to adjust the FxSound Effects and EQ to your exact preferences. Turn FxSound on and immediately hear the difference in sound quality. FxSound is ideal for budget audiophiles, music lovers, gamers, transcriptionists, Netflix enthusiasts, and more. It’s particularly beneficial for those relying on quiet laptop speakers or low-quality audio hardware. As a free tool, FxSound excels in boosting volume, enhancing bass, and improving sound quality. No other free EQ for Windows matches its ease of use. FxSound Is Now Completely Free and Unrestricted FxSound Pro is now free for everyone, not just those who can afford it. Get free and unrestricted access to better sound today. FxSound is now entirely supported by users. Click here to donate to help fund continued development and improvements to FxSound. FxSound 1.2.9.0 changelog: Auto save preset when Equalizer or Effects settings are changed Reset to factory defaults can reset the unsaved preset changes Settings dialog UI improvements for Audio and Equalizer sections Output device list is now displayed in the device preference order Preset is selected immediately when the preset for an active output device changes from settings Fixes and improvements in preferred output device selection Fixed crash issue #487 Fixed preset not getting applied and EQ flat after update (#403 and #472) Fixed system audio device not being restored on reboot (#483) Fixed preset export and import dialogs not shown when always on top is enabled Fixed audio not being restored on exit after the preset save dialog Fixed FxSound on/off handling on Windows session changes FxSound 1.2.10.0 Beta changelog: Command line options can now be applied to an already running instance of FxSound Command line option added to launch FxSound minimized to the system tray Fixed output device not being changed through hotkeys when FxSound is off (#524) Individual hotkeys can now be disabled with Delete key (#515) Fixed the but to prevent invalid hotkeys from being registered (#523) Bluetooth devices removed from device settings are removed from device preference list Fixed device detection failures Fixed application hang when retrieving the audio mix format fails Fixed presets import dialog file name combo box text alignment Fixed output device not being applied through command line Fixed a delay blocking application load when minimizing to the system tray Fixed EQ band sliders not refreshing when switching number of bands (#521) Fixed user-set mute being overridden by FxSound Fixed icon visibility in ARM64 version Finnish language support added Corrected Persian translations Download: FxSound 1.2.9.0 | ARM64 | ~70.0 MB (Open Source) Download: FxSound 1.2.10.0 Beta | ARM64 View: FxSound Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • mIRC 7.84 Final by Razvan Serea mIRC is a full featured Internet Relay Chat client for Windows that can be used to communicate, share, play or work with others on IRC networks around the world, either in multi-user group conferences or in one-to-one private discussions. It has a clean, practical interface that is highly configurable and supports features such as buddy lists, file transfers, multi-server connections, SSL encryption, proxy support, UTF-8 display, customizable sounds, spoken messages, tray notifications, message logging, and more. mIRC also has a powerful scripting language that can be used both to automate mIRC and to create applications that perform a wide range of functions from network communications to playing games. mIRC has been in development for over a decade and is constantly being improved and updated with new technologies. mIRC 7.84 changelog: Added custom dialog editbox option 'optional' for grayed out optional text. Fixed DirectShow temporary wave file not being deleted on exit. Changed $urlget() to retry a connection without compression in the event of an error. Updated code signing certificate to use Azure Artifact Signing. Fixed menubar display bug when in dark mode. Fixed /server -a not preserving existing entry's codepage. Fixed Address Book nick colors "idle time" display bug. Changed installer to no longer require administrator access on startup. Added support for displaying an MDI window's System menu when right-clicking its titlebar. Updated libararies to OpenSSL v3.5.7, TagLib v2.2.1, Zlib v1.3.2, and ADA v0.5.5. Updated CA root certificates cacert.pem file. For a full list of recent changes, please see the versions.txt file. Download: mIRC 7.84 | 4.3 MB (Shareware) View: mIRC Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • You might be right... Look at his name, hiding in plain sight: hAmId.
  • Recent Achievements

    • One Month Later
      timbobit earned a badge
      One Month Later
    • One Month Later
      nates earned a badge
      One Month Later
    • Week One Done
      Almohandis earned a badge
      Week One Done
    • Rookie
      dorf went up a rank
      Rookie
    • First Post
      mike_rumble earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      470
    2. 2
      +Edouard
      165
    3. 3
      PsYcHoKiLLa
      106
    4. 4
      Michael Scrip
      87
    5. 5
      Steven P.
      69
  • Tell a friend

    Love Neowin? Tell a friend!