Additional Internet Connection Required


Recommended Posts

Hi All,

I have my main PC in the conservatory and the modem is connected to a wireless router and then i have 4 x outputs from the router, one of which runs via ethernet to my main PC, and the other runs via ethernet around the outside of my house to my lounge (i don't like using wireless).

I have the lounge ethernet connection connected to my Media Streamer, however the PS3 also required internet and at the the moment i'm constantly pulling out of the streamer and into the ps3.

My question is this:

Can i purchase another router to plug the lounge ethernet end into a router and then have another 4 x outputs so i can run another ethernet from the new lounge router into the PS3 even though the lounge end comes out of a router already in the conservatory? Otherwise it means i will need to run another ethernet from the conservatory pc wireless router and drill through walls again to get it around the house and into the lounge.....

So you are going to buy a new router to get 4 more Ethernet ports ? Get an end of life switch like the Cisco Catalyst 2948G-GE-TX (48 Gigibit Ethernet ports) for 80 bucks or a lame unmanaged 8 port one for 20.

Wire everything into that

As stated you don't need a "router" if what you want to do is add wired ports then you need a switch. Plug your lan cable from your 1st router into this new switch and there you go more lan ports. Depending on the switch you buy it might be 3 more ports, 4 more ports, 7 more ports, 15, etc..

Since you were thinking you could buy a router - I doubt you have any use of a smart or managed switch ;) So the GS108T is not really required - any dumb 10/100 or 10/100/1000 switch should work for you. They can be had for $10-? depending on how many ports you want, other features, etc. Here is like 67 of them all under $25

http://www.newegg.com/Product/ProductList.aspx?Submit=ENE&N=100010066%204093&IsNodeId=1&name=%2410%20-%20%2425

Hi Guys many thanks for your reponses.

Im in the uk, so would the attached provide me with what I need even though im splitting the signall after its gone into and come out of a netgear wireless router?

Edit: meant to post this link

https://www.google.c...wAQ#hsec:online

You should be looking for gigabit 10/100/1000 ports

Hi Guys many thanks for your reponses.

Im in the uk, so would the attached provide me with what I need even though im splitting the signall after its gone into and come out of a netgear wireless router?

Edit: meant to post this link

https://www.google.c...wAQ#hsec:online

Yes, it'll work fine.

Any network switch will be fine for what you want. Streaming devices or PS3 will be fine on 10/100 network and doesn't need gigabit. Chances are your router isn't anyway so there is no point in spending the extra on something you have no need for. However, look around you should be able to pickup a cheap TP link switch or other lesser known brands that'll be more then enough for what you want, for cheap. 10/100 base switches are next to given away on the likes of ebay.

http://www.scan.co.u...ethernet-switch for example, ?6.59

http://www.ebuyer.co...100-switch-s105 or ?3.99

http://www.overclock...rodid=NW-040-TP ?6.49

You'll plug your existing Ethernet cable from your router into one of them switch. Then two new cables from the switch into your streamer and ps3. Job done. Those I've linked don't even care what type of cable you use either, so just buy the cheapest cat5 cable (that's long enough for what you need) to go with it.

Hi Guys, many thanks for the responses, very much appreciated.

My router is a Netgear WNR2000 Wireless N Router, do you know if that is a Gigabit or a 10/100?

What is the difference? The Gigabit is faster i assume?

Unfortunately your router doesn't support gigabit (Standards - Five (5) 10/100 [1 WAN and 4 LAN] Ethernet ports with auto-sensing technology), but having a gigabit switch, with your devices connected through it would give you gigabit transfer speeds on your network just through the switch (by-passing the router). That's if you need gigabit speeds to begin with, which it looks like you wouldn't as you're just after switching a single cable on your current network for your PS3. You can pick up a 100Mb switch for even cheaper! But the choice is yours...

And to answer your question, yes gigabit (1000Mb/s) is faster than 100Mb/s :)

Even if his current router does not support it, why not buy the switch that does support it just in case he gets a new router that does one day?

That is my thinking at least.

Even if his current router does not support it, why not buy the switch that does support it just in case he gets a new router that does one day?

That is my thinking at least.

Well as BudMan pointed out, it's only ?16 for a GS105. Whether the OP wants 1000 or 100 I'm sure the price difference wouldn't break the bank. I too would go for / suggest gigabit.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Was it too much to ask to show the icon in this article?
    • Frankly, I blame whoever is writing such articles. "A big improvement/update and/or new feature is now available to everyone! Also, use this unofficial tweak tool to enable it because it actually isn't available to you yet officially and might not in fact even be entirely ready or whatever, hence why it is perhaps not enabled for you*. But it's great and you should enable it!" I mean there's nothing wrong with sharing info about some feature you might need to enable via unofficial means, of course. It's just that these articles tend to essentially end up being two news pieces in one, and one of them tends to be a bit misleading. (*Yes, yes, the "it's a controlled rollout!" thing. Not a fan of that one either. The argument, not the actual rollout.)
    • Thank you. Will do. I read in the release notes that editor config might be at play here.
    • Actually, I think even Microsoft doesn't know how to control it
    • OpenAI is making Codex more useful in Chrome and the cloud by Pradeep Viswanathan OpenAI's Codex now has more than 5 million users, up nearly 4x from earlier this year. To further accelerate Codex's growth among developers, OpenAI today announced that it has agreed to acquire Ona, a company that builds secure cloud execution and orchestration technology for developers. Ona will enable developers to run Codex with persistent and controlled cloud infrastructure for long-running agentic workflows. Right now, most Codex execution happens locally on developers' laptops and PCs, and the agents work continuously for hours. Through Ona, OpenAI aims to make Codex agents keep working for days without being tied to a user’s local machine or an active session. This will be an important capability for enterprises that want to deploy AI agents in production while maintaining control over infrastructure, data, security boundaries, credential scope, logging, and review workflows. Like any acquisition, the deal is still subject to customary closing conditions, including regulatory approvals. Until the deal closes, OpenAI and Ona will continue to operate as separate companies. After closing, Ona’s team will join the Codex team to improve developer workflows. Alongside the Ona acquisition announcement, OpenAI today introduced a few Codex updates. Developers can now save Codex rate limit resets and use them later instead of losing them when they are not needed immediately. OpenAI is also adding a referral option where users can invite a friend to Codex and get a saved rate limit reset. OpenAI today also announced a developer mode for browser use in Chrome and the Codex in-app browser. With this mode, Codex can use the Chrome DevTools Protocol to debug web apps, inspect pages, and work more directly with browser-based development workflows. Developers can use this when they want Codex to profile JavaScript, inspect console output and network traffic, examine web page states including the DOM and applied styles, and more.
  • Recent Achievements

    • One Month Later
      Jamswaz earned a badge
      One Month Later
    • Week One Done
      Jamswaz earned a badge
      Week One Done
    • Rookie
      Marzoid went up a rank
      Rookie
    • Community Regular
      coch went up a rank
      Community Regular
    • One Year In
      slackerzz earned a badge
      One Year In
  • Popular Contributors

    1. 1
      +primortal
      509
    2. 2
      PsYcHoKiLLa
      186
    3. 3
      +Edouard
      157
    4. 4
      Steven P.
      83
    5. 5
      ATLien_0
      75
  • Tell a friend

    Love Neowin? Tell a friend!