Recommended Posts

I just started having this problem today but first some background;

I live 3 doors up from my Grandmother and we both have wifi routers. Our internet is faster than hers but its throttled at peak times, so I bought a long range WIFI adapter which has a little satellite type thing for an ariel. It works great and picks up about 10 networks! Where as the one I had before picked up 2.

What I usually do is at 5PM (start of peak time) I connect to my Grannys router to use her internet as ours is down to 1MB.

Last time I used it was 2 nights ago and it worked fine, got downstream of 7mbit.

However, since then I cannot connect anymore. I can connect to my own router fine though (with signal as low as 50%, however its usually 100%)

If I point the adapter the right way, I can get 100% signal quality and 84% signal strength to her router but its always limited connectivity (no internet).

when I leave IP settings as default, its assigning me an IP of something like 70.264.30.22 but when it was working 2 days ago, my IP was 192.168.1.8

The subnet is 255.255.255.0 and the gateway is empty. It also says unkown network

When I set the IP to manual and force myself an IP of 192.168.1.8 (or 192.168.1.X) and the gateway to 192.168.1.1 (which i know is correct, its also in my browser history) it now picks up the network name but still limited connectivity.

When I manually set the IP's I can ping the router and get 4 replies all under 6ms. However I still can't connect.

I cant even open the routers config in browser at 192.168.1.1 It just says error, server never replied any data.

Not sure whats wrong here, it was working fine before and with signal at 84% (100% quality) I thought it should connect no problem.

she isn't at home justnow so I cant reset the router either.

Link to comment
https://www.neowin.net/forum/topic/1128390-wifi-troubles/
Share on other sites

verify your grandmothers settings on her router, check the IP on her computer and see if she can get out. then check your settings.

yeah thats my next plan, unfortunately shes not home but will do this as soon as she is.

Just dont understand why it connected fine before on auto IP but now im having to manually set the IP to even get a connection.

It could be her router crapped out, some third party routers do that and are fine after a reboot. Or perhaps your gran enabled mac filtering :D

haha could be the first one. Definitely not the second! haha she can get to facebook thats about it! I've seen her type google into google! rofl!

Also, even if it were MAC filtering, i would get an error or something rather than just no IP or SSID until i manually set an IP.

Link to comment
https://www.neowin.net/forum/topic/1128390-wifi-troubles/#findComment-595423574
Share on other sites

I've seen her type google into google!

Heh I think that's a trait with old people. To come to think of it, you're right if mac filtering was enabled, you wouldn't be able to connect to the network. Try the following commands in elevated command prompt:

ipconfig/release

ipconfig/flushdns

Then disable your wired adapter if you are wired leaving only the wireless adapter enabled enter these in command prompt:

ipconfig/renew

ipconfig/registerdns

Now connect to her network after and see if there's any change:

Link to comment
https://www.neowin.net/forum/topic/1128390-wifi-troubles/#findComment-595423586
Share on other sites

Heh I think that's a trait with old people. To come to think of it, you're right if mac filtering was enabled, you wouldn't be able to connect to the network. Try the following commands in elevated command prompt:

ipconfig/release

ipconfig/flushdns

Then disable your wired adapter if you are wired leaving only the wireless adapter enabled enter these in command prompt:

ipconfig/renew

ipconfig/registerdns

Now connect to her network after and see if there's any change:

No still no change :(

Dont get this at all. When I leave it at auto, the router assigns me no IP which Is why I dont get connectivity obviously

when I manually do it, all I can do is ping the router

I was just thinking that her router has one of those connect buttons, you know you press it and then connect to it. Maybe thats why I can't connect?

However, I've never had a problem before :s

setup remote access like teamviewer or logmein free so that you can troubleshoot when she isn't home.

Thats a great idea :) I will definitely do that in the future

Link to comment
https://www.neowin.net/forum/topic/1128390-wifi-troubles/#findComment-595423602
Share on other sites

Hmm that's odd. Does your gran have an ADSL or Cable connection?

ADSL

Cant figure this out at all, don't think she will be home till atleast tomorrow either.

looks like I may just have to put up with throttling for a day or two :(

I would put it down to the distance, had I not connected before and have signal of 84%

Link to comment
https://www.neowin.net/forum/topic/1128390-wifi-troubles/#findComment-595423628
Share on other sites

Is it possible to sign into the router and check logs? I know with mine there is an option (though depending on the modem) this sometimes can only be checked when connected directly to it.

That may shed some light - on what is going on.

afraid not, once I manually set IP, the network ID comes up (rather than unidentified network) and I can ping 192.168.1.1 but can't visit in browser :(

Link to comment
https://www.neowin.net/forum/topic/1128390-wifi-troubles/#findComment-595423634
Share on other sites

I have seen this once a while ago- you may want to check to see for example if the device is set to hibernate on the computer it is attached to... In other words let us say your grann'ys computer goes to sleep so it will tell the modem to hibernate as well (it didn't before because you were using it) Just a thought.

That is just a thought of something to check based upon the -- it was working -- then poof no internet.

also have this a look --

http://support.microsoft.com/kb/813827

Link to comment
https://www.neowin.net/forum/topic/1128390-wifi-troubles/#findComment-595423640
Share on other sites

I have a sneaky suspicion her modem/router has lost its WAN connection or it may have a built in feature to auto disconnect from the ISP after a certain amount of time idle. When your nan gets back ask her to cycle power the modem/router's power and I'm sure you should be able to connect again without a problem

Link to comment
https://www.neowin.net/forum/topic/1128390-wifi-troubles/#findComment-595423644
Share on other sites

Are you with virgin media?

One thing I don't understand about throttling is that their throttling gets the internet slow to a crawl when I download a certain amouth with a wired connection but itcs normal when downoading through a wireles connection... :s

Why is this? Anyone else experienced the same? :confused:

Link to comment
https://www.neowin.net/forum/topic/1128390-wifi-troubles/#findComment-595423688
Share on other sites

Thanks for the further tips guys, I'm thinking you could be right, I haven't spoken to her for a few days but last time I was logged in I did notice she hadn't been connected for atleast a day before that and she is the only user.

I am with Sky but they have no hardware in our exchange so they are reselling BT. Therefore we can only get Sky Connect which is throttled between 5 and 1AM

BT don't throttle in my area as its their hardware, thats who Gran is with and who we will be switching to in a month when our Sky contract is up :)

EDIT:

Been doing some reading and the 169.254.x.x IP I am getting is a Link Local address. Its what windows assigns when the computer doesnt get an IP from the router.

So by me manually assigning the IP, thats why it seems a little better when infact it isn't. The router is still doing (or not doing) the same thing.

Guess I'll just need to wait until she is home to reboot it and like others have said, I suspect that will fix the problems.

(Or maybe I could somehow cut the power to her house to restart it :laugh: haha)

Link to comment
https://www.neowin.net/forum/topic/1128390-wifi-troubles/#findComment-595423710
Share on other sites

Thanks for the further tips guys, I'm thinking you could be right, I haven't spoken to her for a few days but last time I was logged in I did notice she hadn't been connected for atleast a day before that and she is the only user.

I am with Sky but they have no hardware in our exchange so they are reselling BT. Therefore we can only get Sky Connect which is throttled between 5 and 1AM

BT don't throttle in my area as its their hardware, thats who Gran is with and who we will be switching to in a month when our Sky contract is up :)

EDIT:

Been doing some reading and the 169.254.x.x IP I am getting is a Link Local address. Its what windows assigns when the computer doesnt get an IP from the router.

So by me manually assigning the IP, thats why it seems a little better when infact it isn't. The router is still doing (or not doing) the same thing.

Guess I'll just need to wait until she is home to reboot it and like others have said, I suspect that will fix the problems.

(Or maybe I could somehow cut the power to her house to restart it :laugh: haha)

Definitely sounds like something has gone wrong her end, if shes not in the house atm, maybe shes unplugged a few things, you know how oaps are for worrying ;)

Link to comment
https://www.neowin.net/forum/topic/1128390-wifi-troubles/#findComment-595423786
Share on other sites

its maybe only even 2 depending on how its counted

5-----7------9 -----11

^gran---------------^us

If there was a way to lay some Ethernet, I can't stress enough how wrong it would be for you to get a mate or two and a jimmy/crow bar (commonly called breaker bar from the local hardware stores) and lift the slabs outside your house to slip under some cable or even throw Ethernet cable up into the cutters (if you're in terraced houses). I certainly wouldn't advise taking a spade, sticking it in garden at the front or rear about a foot down to make a trench and then dropping the cable in and pressing it back so it doesn't look like you've been digging.. nope. I've never done anything like that and you shouldn't either! while these ideas and any others you can think of to get Ethernet connected between you and your gran are much better then wireless for connectivity you shouldn't do it. It might seem attractive for 30meters worth of cat5 for around ?8 to get gigabit (using cat6) connectivity when you only want to use her internet... hmm, at least you don't have to worry about lightning with wireless right.

Link to comment
https://www.neowin.net/forum/topic/1128390-wifi-troubles/#findComment-595423894
Share on other sites

If there was a way to lay some Ethernet, I can't stress enough how wrong it would be for you to get a mate or two and a jimmy/crow bar (commonly called breaker bar from the local hardware stores) and lift the slabs outside your house to slip under some cable or even throw Ethernet cable up into the cutters (if you're in terraced houses). I certainly wouldn't advise taking a spade, sticking it in garden at the front or rear about a foot down to make a trench and then dropping the cable in and pressing it back so it doesn't look like you've been digging.. nope. I've never done anything like that and you shouldn't either! while these ideas and any others you can think of to get Ethernet connected between you and your gran are much better then wireless for connectivity you shouldn't do it. It might seem attractive for 30meters worth of cat5 for around ?8 to get gigabit (using cat6) connectivity when you only want to use her internet... hmm, at least you don't have to worry about lightning with wireless right.

I did think about putting a cable up in the guttering as it is terraced houses lol!

Not worth it now though as I have the long range wifi and we will be changing providers soon and wont have any more throttling to put up with :)

Link to comment
https://www.neowin.net/forum/topic/1128390-wifi-troubles/#findComment-595424548
Share on other sites

"its assigning me an IP of something like 70.264.30.22"

Well I highly doubt it was anything like to be honest, for starters 264 is not even a valid octet ;)

I would guess the IP was APIPA, and started with 169.254.x.x

This is the automatic random IP many OSes setup when set for DHCP and no dhcp server answers.

Nothing to be done until you can check the router - for all we know she turned on mac filtering ;) You say you can ping her router, can you access it via its remote console. This is quite often disabled via wireless in the first place as a security measure, etc. But you could try - if you can then you can verify it has wan connection and its dhcp server is on, etc.

Link to comment
https://www.neowin.net/forum/topic/1128390-wifi-troubles/#findComment-595424708
Share on other sites

"its assigning me an IP of something like 70.264.30.22"

Well I highly doubt it was anything like to be honest, for starters 264 is not even a valid octet ;)

I would guess the IP was APIPA, and started with 169.254.x.x

This is the automatic random IP many OSes setup when set for DHCP and no dhcp server answers.

Nothing to be done until you can check the router - for all we know she turned on mac filtering ;) You say you can ping her router, can you access it via its remote console. This is quite often disabled via wireless in the first place as a security measure, etc. But you could try - if you can then you can verify it has wan connection and its dhcp server is on, etc.

yeah sorry I didn't copy the IP down that was written from memory (only glanced at it). Yes you are correct it was 169.254 :) I realised my mistake when I posted later about the Link Local IP (169.254.x.x)

Yeah I will just have to wait until she is home.

I can ping 192.168.1.1 but if I visit that in browser then it just times out. Chrome gives me error of server didn't respond with any data (or words to that effect)

Link to comment
https://www.neowin.net/forum/topic/1128390-wifi-troubles/#findComment-595424808
Share on other sites

Its very bad practice to allow router admin gui access from wireless - I would hope most routers have this disabled by default..

Or it could be that just the router has crashed and all its really doing is answering pings. Which would explain why you can not get on the internet even if you setup an IP on its range and point to it as gateway. You sure that is the routers IP your pointing to for gateway and dns, and not some other IP on the network ;)

The most likely issue is router is just hosed/crashed/hung, etc. And a reboot will fix it up.

Link to comment
https://www.neowin.net/forum/topic/1128390-wifi-troubles/#findComment-595424824
Share on other sites

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Nothing kills CMF Phone 2 Pro's successor due to rising memory prices by Hamid Ganji Storage and RAM prices have been rising over the past year, leading to a significant increase in the cost of electronics for customers around the world. Many companies are now revising their plans for upcoming devices due to higher component costs and overall production expenses. CMF is the latest company to cancel the successor to one of its best-selling phones due to rising memory prices. CMF is a sub-brand of Nothing and focuses on making budget smartphones for growing markets. The brand launched the CMF Phone 2 Pro last year with some eye-catching specifications and an affordable price. While many customers may have been waiting for a successor this year, one of the company’s executives has announced that CMF will not release a new smartphone this year. And AI is to blame. As Nothing co-founder Akis Evangelidis announced on X, the company has been working on a successor to the CMF Phone 2 Pro, but with current memory prices, it cannot “build a phone that feels like a genuine step forward at a price that makes sense for CMF.” So, no new CMF phone will be launched this year. Meanwhile, Evangelidis said the company still has several new products in the pipeline, including some in entirely new categories. He added that the Nothing brand will also continue launching new products through 2026. Budget smartphones are among the first victims of the surge in RAM and memory prices, as they have become more expensive to build. The sharp increase in memory costs could also reshape the traditional price ranges associated with budget phones. Apple CEO Tim Cook also recently said that price increases for some of the company’s products are unavoidable because RAM and memory have become significantly more expensive this year. Analysts estimate that the base price of the upcoming iPhone 18 Pro could rise to $1,399 due to current market shortages.
    • Nudge me when they bring back hardware audio acceleration so I can get my EAX 5 back. We've evolved graphics to real-time path tracing, but regressed audio some 15 years back in time with this stupid software audio stack.
    • Ocenaudio 3.19.4 by Razvan Serea  Ocenaudio is a full featured, fast and easy to use audio and music editor. It is the ideal software for people who need to edit and analyze audio files without complications. Ocenaudio also has powerful features that will please more advanced users. To assist ocenaudio development, a powerful toolset of audio editing, analysis and manipulation called Ocen Framework was created. ocenaudio is also based on Qt framework, a well known library for cross-platform development. Cross-platform support ocenaudio is available for all major operating systems: Microsoft Windows, Mac OS X and Linux. Native applications are generated for each platform from a common source, in order to achieve excelent performance and seamless integration with the operating system. All versions of ocenaudio have a uniform set of features and the same graphical interface, so the skills you learn in one platform can be used in the others. VST plugins support Ocenaudio supports VST (Virtual Studio Technology) plugins, giving its users access to numerous effects. Like the native effects, VST effects can use real-time preview to aide configuration. Real-time preview of effects Applying effects such as EQ, gain and filtering is an important part of audio editing. However, it is very tricky to get the desired result by adjusting the controls configuration alone: you must listen the processed audio. To ease the configuration of audio effects, ocenaudio has a real time preview feature: you hear the processed signal while adjusting the controls. The effect configuration window also includes a miniature view of the selected audio signal. You can navigate on this miniature view in the same way as you do on the main interface, selecting parts that interest you and listening to the effect result in real time. Multiselection for delicate editions To speed up complex audio files editing, ocenaudio includes multi-selection. With this amazing tool, you can simultaneously select different portions of an audio file and listen, edit or even apply an effect to them. For example, if you want to normalize only the excerpts of an interview where the interviewee is talking, just select them and apply the effect. Eficient edition of large files With ocenaudio, there is no limit to the length or the quantity of the audio files you can edit. Using an advanced memory management system, the application keeps your files open without wasting any of your computer's memory. Even in files several hours long, common editing operations such as copy, cut or paste happen almost instantly. Fully featured spectrogram Besides offering an incredible waveform view of your audio files, ocenaudio has a powerful and complete spectrogram view. In this view, you can analyze the spectral content of your audio signal with maximum clarity. Advanced users will be surprised to find that the spectrogram settings are applied in real time. The display is updated immediately when altering features such as the number of frequency bands, window type and size and dynamic range of the display. Ocenaudio 3.19.4 changelog: Adds fallback fonts so every language and symbol displays correctly Improves autosave and session recovery stability Improves region navigation and display Fixes a crash when the level meter is used on displays with a scaling greater than 200% Fixes memory corruption when using the silence selection tools Fixes crashes when closing a file while effects are still being processed Fixes a freeze when applying effects to many files at once (macOS) Fixes crashes related to audio devices on Windows Fixes invalid file names when exporting regions whose label is used as the file name Other bug fixes and improvements Download: Ocenaudio 64-bit | Portable | ~40.0 MB (Freeware) Download: Ocenaudio for Linux and Mac OS View: Ocenaudio Homepage | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Hasleo Disk Clone 5.8.2.1 by Razvan Serea Hasleo Disk Clone is a free and all-in-one disk cloning software for Windows 11/10/8/7/Vista and Windows Server that can help you migrate Windows OS to another disk, clone one disk to another disk or clone one partition to another location quickly and efficiently. Completely Free Windows Migration and Disk/Partition Cloning Software Migrate Windows from one disk to another without reinstalling Windows, apps. Clone one disk to another and makes the data on 2 disks are exactly the same. Clone a partition to another location without losing any data. Easily adjust the size and location of the destination partition. Convert MBR to GPT or convert GPT to MBR by cloning. Creation of Windows PE emergency disk. Extremely fast cloning speed and multi-language support. Supported OS: Windows Vista/Server 2008 or later, fully compatible with GPT and UEFI. Hasleo Disk Clone 5.8.2.1 changelog: Fixed an issue that caused disk enumeration to fail Fixed an issue where WinPE created under Windows ARM64 26H1 did not work properly Download: Hasleo Disk Clone 5.8.2.1 | 32.3 MB (Freeware) Link: Hasleo Disk Clone Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • This got me thinking, would you rather a self driving car prioritise protecting its passengers or everyone else? I'd choose the one that keeps me and my kids safest. At some point, these cars have to make those choices already, don't they? Wonder if we have a way to find out what way they lean.
  • Recent Achievements

    • Collaborator
      ryansurfer98 went up a rank
      Collaborator
    • Week One Done
      Eurosoft10 earned a badge
      Week One Done
    • One Month Later
      Eurosoft10 earned a badge
      One Month Later
    • One Year In
      Skeet Campbell earned a badge
      One Year In
    • One Month Later
      Sharbel earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      552
    2. 2
      +Edouard
      188
    3. 3
      Michael Scrip
      78
    4. 4
      PsYcHoKiLLa
      74
    5. 5
      neufuse
      71
  • Tell a friend

    Love Neowin? Tell a friend!