Recommended Posts

I just started having this problem today but first some background;

I live 3 doors up from my Grandmother and we both have wifi routers. Our internet is faster than hers but its throttled at peak times, so I bought a long range WIFI adapter which has a little satellite type thing for an ariel. It works great and picks up about 10 networks! Where as the one I had before picked up 2.

What I usually do is at 5PM (start of peak time) I connect to my Grannys router to use her internet as ours is down to 1MB.

Last time I used it was 2 nights ago and it worked fine, got downstream of 7mbit.

However, since then I cannot connect anymore. I can connect to my own router fine though (with signal as low as 50%, however its usually 100%)

If I point the adapter the right way, I can get 100% signal quality and 84% signal strength to her router but its always limited connectivity (no internet).

when I leave IP settings as default, its assigning me an IP of something like 70.264.30.22 but when it was working 2 days ago, my IP was 192.168.1.8

The subnet is 255.255.255.0 and the gateway is empty. It also says unkown network

When I set the IP to manual and force myself an IP of 192.168.1.8 (or 192.168.1.X) and the gateway to 192.168.1.1 (which i know is correct, its also in my browser history) it now picks up the network name but still limited connectivity.

When I manually set the IP's I can ping the router and get 4 replies all under 6ms. However I still can't connect.

I cant even open the routers config in browser at 192.168.1.1 It just says error, server never replied any data.

Not sure whats wrong here, it was working fine before and with signal at 84% (100% quality) I thought it should connect no problem.

she isn't at home justnow so I cant reset the router either.

Link to comment
https://www.neowin.net/forum/topic/1128390-wifi-troubles/
Share on other sites

verify your grandmothers settings on her router, check the IP on her computer and see if she can get out. then check your settings.

yeah thats my next plan, unfortunately shes not home but will do this as soon as she is.

Just dont understand why it connected fine before on auto IP but now im having to manually set the IP to even get a connection.

It could be her router crapped out, some third party routers do that and are fine after a reboot. Or perhaps your gran enabled mac filtering :D

haha could be the first one. Definitely not the second! haha she can get to facebook thats about it! I've seen her type google into google! rofl!

Also, even if it were MAC filtering, i would get an error or something rather than just no IP or SSID until i manually set an IP.

Link to comment
https://www.neowin.net/forum/topic/1128390-wifi-troubles/#findComment-595423574
Share on other sites

I've seen her type google into google!

Heh I think that's a trait with old people. To come to think of it, you're right if mac filtering was enabled, you wouldn't be able to connect to the network. Try the following commands in elevated command prompt:

ipconfig/release

ipconfig/flushdns

Then disable your wired adapter if you are wired leaving only the wireless adapter enabled enter these in command prompt:

ipconfig/renew

ipconfig/registerdns

Now connect to her network after and see if there's any change:

Link to comment
https://www.neowin.net/forum/topic/1128390-wifi-troubles/#findComment-595423586
Share on other sites

Heh I think that's a trait with old people. To come to think of it, you're right if mac filtering was enabled, you wouldn't be able to connect to the network. Try the following commands in elevated command prompt:

ipconfig/release

ipconfig/flushdns

Then disable your wired adapter if you are wired leaving only the wireless adapter enabled enter these in command prompt:

ipconfig/renew

ipconfig/registerdns

Now connect to her network after and see if there's any change:

No still no change :(

Dont get this at all. When I leave it at auto, the router assigns me no IP which Is why I dont get connectivity obviously

when I manually do it, all I can do is ping the router

I was just thinking that her router has one of those connect buttons, you know you press it and then connect to it. Maybe thats why I can't connect?

However, I've never had a problem before :s

setup remote access like teamviewer or logmein free so that you can troubleshoot when she isn't home.

Thats a great idea :) I will definitely do that in the future

Link to comment
https://www.neowin.net/forum/topic/1128390-wifi-troubles/#findComment-595423602
Share on other sites

Hmm that's odd. Does your gran have an ADSL or Cable connection?

ADSL

Cant figure this out at all, don't think she will be home till atleast tomorrow either.

looks like I may just have to put up with throttling for a day or two :(

I would put it down to the distance, had I not connected before and have signal of 84%

Link to comment
https://www.neowin.net/forum/topic/1128390-wifi-troubles/#findComment-595423628
Share on other sites

Is it possible to sign into the router and check logs? I know with mine there is an option (though depending on the modem) this sometimes can only be checked when connected directly to it.

That may shed some light - on what is going on.

afraid not, once I manually set IP, the network ID comes up (rather than unidentified network) and I can ping 192.168.1.1 but can't visit in browser :(

Link to comment
https://www.neowin.net/forum/topic/1128390-wifi-troubles/#findComment-595423634
Share on other sites

I have seen this once a while ago- you may want to check to see for example if the device is set to hibernate on the computer it is attached to... In other words let us say your grann'ys computer goes to sleep so it will tell the modem to hibernate as well (it didn't before because you were using it) Just a thought.

That is just a thought of something to check based upon the -- it was working -- then poof no internet.

also have this a look --

http://support.microsoft.com/kb/813827

Link to comment
https://www.neowin.net/forum/topic/1128390-wifi-troubles/#findComment-595423640
Share on other sites

I have a sneaky suspicion her modem/router has lost its WAN connection or it may have a built in feature to auto disconnect from the ISP after a certain amount of time idle. When your nan gets back ask her to cycle power the modem/router's power and I'm sure you should be able to connect again without a problem

Link to comment
https://www.neowin.net/forum/topic/1128390-wifi-troubles/#findComment-595423644
Share on other sites

Are you with virgin media?

One thing I don't understand about throttling is that their throttling gets the internet slow to a crawl when I download a certain amouth with a wired connection but itcs normal when downoading through a wireles connection... :s

Why is this? Anyone else experienced the same? :confused:

Link to comment
https://www.neowin.net/forum/topic/1128390-wifi-troubles/#findComment-595423688
Share on other sites

Thanks for the further tips guys, I'm thinking you could be right, I haven't spoken to her for a few days but last time I was logged in I did notice she hadn't been connected for atleast a day before that and she is the only user.

I am with Sky but they have no hardware in our exchange so they are reselling BT. Therefore we can only get Sky Connect which is throttled between 5 and 1AM

BT don't throttle in my area as its their hardware, thats who Gran is with and who we will be switching to in a month when our Sky contract is up :)

EDIT:

Been doing some reading and the 169.254.x.x IP I am getting is a Link Local address. Its what windows assigns when the computer doesnt get an IP from the router.

So by me manually assigning the IP, thats why it seems a little better when infact it isn't. The router is still doing (or not doing) the same thing.

Guess I'll just need to wait until she is home to reboot it and like others have said, I suspect that will fix the problems.

(Or maybe I could somehow cut the power to her house to restart it :laugh: haha)

Link to comment
https://www.neowin.net/forum/topic/1128390-wifi-troubles/#findComment-595423710
Share on other sites

Thanks for the further tips guys, I'm thinking you could be right, I haven't spoken to her for a few days but last time I was logged in I did notice she hadn't been connected for atleast a day before that and she is the only user.

I am with Sky but they have no hardware in our exchange so they are reselling BT. Therefore we can only get Sky Connect which is throttled between 5 and 1AM

BT don't throttle in my area as its their hardware, thats who Gran is with and who we will be switching to in a month when our Sky contract is up :)

EDIT:

Been doing some reading and the 169.254.x.x IP I am getting is a Link Local address. Its what windows assigns when the computer doesnt get an IP from the router.

So by me manually assigning the IP, thats why it seems a little better when infact it isn't. The router is still doing (or not doing) the same thing.

Guess I'll just need to wait until she is home to reboot it and like others have said, I suspect that will fix the problems.

(Or maybe I could somehow cut the power to her house to restart it :laugh: haha)

Definitely sounds like something has gone wrong her end, if shes not in the house atm, maybe shes unplugged a few things, you know how oaps are for worrying ;)

Link to comment
https://www.neowin.net/forum/topic/1128390-wifi-troubles/#findComment-595423786
Share on other sites

its maybe only even 2 depending on how its counted

5-----7------9 -----11

^gran---------------^us

If there was a way to lay some Ethernet, I can't stress enough how wrong it would be for you to get a mate or two and a jimmy/crow bar (commonly called breaker bar from the local hardware stores) and lift the slabs outside your house to slip under some cable or even throw Ethernet cable up into the cutters (if you're in terraced houses). I certainly wouldn't advise taking a spade, sticking it in garden at the front or rear about a foot down to make a trench and then dropping the cable in and pressing it back so it doesn't look like you've been digging.. nope. I've never done anything like that and you shouldn't either! while these ideas and any others you can think of to get Ethernet connected between you and your gran are much better then wireless for connectivity you shouldn't do it. It might seem attractive for 30meters worth of cat5 for around ?8 to get gigabit (using cat6) connectivity when you only want to use her internet... hmm, at least you don't have to worry about lightning with wireless right.

Link to comment
https://www.neowin.net/forum/topic/1128390-wifi-troubles/#findComment-595423894
Share on other sites

If there was a way to lay some Ethernet, I can't stress enough how wrong it would be for you to get a mate or two and a jimmy/crow bar (commonly called breaker bar from the local hardware stores) and lift the slabs outside your house to slip under some cable or even throw Ethernet cable up into the cutters (if you're in terraced houses). I certainly wouldn't advise taking a spade, sticking it in garden at the front or rear about a foot down to make a trench and then dropping the cable in and pressing it back so it doesn't look like you've been digging.. nope. I've never done anything like that and you shouldn't either! while these ideas and any others you can think of to get Ethernet connected between you and your gran are much better then wireless for connectivity you shouldn't do it. It might seem attractive for 30meters worth of cat5 for around ?8 to get gigabit (using cat6) connectivity when you only want to use her internet... hmm, at least you don't have to worry about lightning with wireless right.

I did think about putting a cable up in the guttering as it is terraced houses lol!

Not worth it now though as I have the long range wifi and we will be changing providers soon and wont have any more throttling to put up with :)

Link to comment
https://www.neowin.net/forum/topic/1128390-wifi-troubles/#findComment-595424548
Share on other sites

"its assigning me an IP of something like 70.264.30.22"

Well I highly doubt it was anything like to be honest, for starters 264 is not even a valid octet ;)

I would guess the IP was APIPA, and started with 169.254.x.x

This is the automatic random IP many OSes setup when set for DHCP and no dhcp server answers.

Nothing to be done until you can check the router - for all we know she turned on mac filtering ;) You say you can ping her router, can you access it via its remote console. This is quite often disabled via wireless in the first place as a security measure, etc. But you could try - if you can then you can verify it has wan connection and its dhcp server is on, etc.

Link to comment
https://www.neowin.net/forum/topic/1128390-wifi-troubles/#findComment-595424708
Share on other sites

"its assigning me an IP of something like 70.264.30.22"

Well I highly doubt it was anything like to be honest, for starters 264 is not even a valid octet ;)

I would guess the IP was APIPA, and started with 169.254.x.x

This is the automatic random IP many OSes setup when set for DHCP and no dhcp server answers.

Nothing to be done until you can check the router - for all we know she turned on mac filtering ;) You say you can ping her router, can you access it via its remote console. This is quite often disabled via wireless in the first place as a security measure, etc. But you could try - if you can then you can verify it has wan connection and its dhcp server is on, etc.

yeah sorry I didn't copy the IP down that was written from memory (only glanced at it). Yes you are correct it was 169.254 :) I realised my mistake when I posted later about the Link Local IP (169.254.x.x)

Yeah I will just have to wait until she is home.

I can ping 192.168.1.1 but if I visit that in browser then it just times out. Chrome gives me error of server didn't respond with any data (or words to that effect)

Link to comment
https://www.neowin.net/forum/topic/1128390-wifi-troubles/#findComment-595424808
Share on other sites

Its very bad practice to allow router admin gui access from wireless - I would hope most routers have this disabled by default..

Or it could be that just the router has crashed and all its really doing is answering pings. Which would explain why you can not get on the internet even if you setup an IP on its range and point to it as gateway. You sure that is the routers IP your pointing to for gateway and dns, and not some other IP on the network ;)

The most likely issue is router is just hosed/crashed/hung, etc. And a reboot will fix it up.

Link to comment
https://www.neowin.net/forum/topic/1128390-wifi-troubles/#findComment-595424824
Share on other sites

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • The quantum search for Time's origin had an equally mind-boggling conclusion by Sayan Sen Image by Steve Johnson via Pexels A theoretical study from researchers at the University of Surrey suggested that the direction of time may not be fundamentally fixed in certain quantum systems. The work, published in Scientific Reports, examined how the “arrow of time” could emerge from microscopic physics and found that time-reversal symmetry can remain intact even in models used to describe processes such as energy loss and thermalisation. The arrow of time refers to the observed one-way direction from past to future in everyday life. In macroscopic processes, this is easy to see. Spilled milk spreads across a table and does not gather back into a glass, and heat flows from hotter objects to colder ones. These processes shape the common sense idea that time moves in a single direction. However, at the level of fundamental physics, many equations do not prefer a direction of time. Time-reversal symmetry means that the same physical laws can describe a system whether time moves forward or backward. This has made it difficult to explain why irreversible behaviour appears in the large-scale world even when the underlying rules do not require it. Dr Andrea Rocco, Associate Professor in Physics and Mathematical Biology at the University of Surrey, described this contrast: "One way to explain this is when you look at a process like spilt milk spreading across a table, it's clear that time is moving forward. But if you were to play that in reverse, like a movie, you'd immediately know something was wrong – it would be hard to believe milk could just gather back into a glass. However, there are processes, such as the motion of a pendulum, that look just as believable in reverse. The puzzle is that, at the most fundamental level, the laws of physics resemble the pendulum; they do not account for irreversible processes. Our findings suggest that while our common experience tells us that time only moves one way, we are just unaware that the opposite direction would have been equally possible." The study focused on open quantum systems, which are quantum systems that interact with a surrounding environment. This environment, often described as a heat bath, can exchange energy and information with the system. The researchers used this framework to study how a direction of time might appear even when the underlying physics does not enforce one. A key part of the analysis involved the Markov approximation. This is a simplification used in many models where the system is assumed not to retain memory of its past states. The idea is that changes depend only on the current state, not on earlier history. This is commonly used when studying thermalisation, which is the process where a system settles into equilibrium with its environment. The study also used concepts such as master equations, including the Lindblad and Pauli equations, which describe how probabilities of different quantum states change over time. Another related model discussed was quantum Brownian motion, which describes the random-like movement of a quantum particle interacting continuously with its environment. In these descriptions, a “memory kernel” can appear, which is a mathematical term that accounts for how past states influence current behaviour. The researchers found that applying the Markov approximation did not break time-reversal symmetry. Even when the system interacted with an effectively infinite heat bath, the resulting equations of motion remained symmetric in time. This meant that the same mathematical description could, in principle, run forward or backward in time without contradiction. The study further showed that standard frameworks used in open quantum systems, including quantum Brownian motion and master equations like the Lindblad and Pauli forms, could be written in a time-symmetric way. These equations are typically used to describe processes that look irreversible, such as dissipation and thermalisation, but the results suggested they can also be interpreted as allowing evolution in both time directions. Thomas Guff, Research Fellow in Quantum Thermodynamics, said: "The surprising part of this project was that even after making the standard simplifying assumption to our equations describing open quantum systems, the equations still behaved the same way whether the system was moving forwards or backwards in time. When we carefully worked through the maths, we found that this behaviour had to be the case because a key part of the equation, the "memory kernel," is symmetrical in time. We also found a small but important detail which is usually overlooked – a time discontinuous factor emerged that kept the time-symmetry property intact. It’s unusual to see such a mathematical mechanism in a physics equation because it's not continuous, and it was very surprising to see it appear so naturally." The researchers also noted that deriving a one-way arrow of time from time-reversal symmetric microscopic dynamics remains an open problem across fields such as thermodynamics, statistical mechanics, particle physics, and cosmology. Their results suggested that some standard descriptions of irreversible behaviour in open quantum systems may be better understood using a time-symmetric formulation of Markovianity. According to the study, processes such as thermalisation, which are usually treated as irreversible, could in theory be described in a way that allows evolution in either time direction under the same rules. This does not imply that time reversal occurs in everyday life, but rather that the underlying equations do not strictly enforce a single direction. Overall, the findings suggested that the perceived direction of time may emerge from how physical systems are modelled and approximated, rather than from a fundamental asymmetry in the laws themselves. The researchers noted that this perspective could have implications for ongoing work in quantum mechanics, thermodynamics, and cosmology on the origin of time’s arrow. Source: University of Surrey, Nature This article was generated with some help from AI and reviewed by an editor. Under Section 107 of the Copyright Act 1976, this material is used for the purpose of news reporting. Fair use is a use permitted by copyright statute that might otherwise be infringing
    • A bit premature... 100% Marketing. Bizarre.
    • A $300 price hike is insane! No one is going to want to pay that much!
    • Since the 1st one flopped, there is really no reason to make another one. It's just losing money left and right.
  • Recent Achievements

    • Reacting Well
      BizSAR earned a badge
      Reacting Well
    • First Post
      AndreaB earned a badge
      First Post
    • Week One Done
      Huge Trailer earned a badge
      Week One Done
    • Week One Done
      Classifyskilleducation earned a badge
      Week One Done
    • One Month Later
      eurospharma62 earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      581
    2. 2
      +Edouard
      182
    3. 3
      PsYcHoKiLLa
      75
    4. 4
      Michael Scrip
      73
    5. 5
      neufuse
      64
  • Tell a friend

    Love Neowin? Tell a friend!