Recommended Posts

I just started having this problem today but first some background;

I live 3 doors up from my Grandmother and we both have wifi routers. Our internet is faster than hers but its throttled at peak times, so I bought a long range WIFI adapter which has a little satellite type thing for an ariel. It works great and picks up about 10 networks! Where as the one I had before picked up 2.

What I usually do is at 5PM (start of peak time) I connect to my Grannys router to use her internet as ours is down to 1MB.

Last time I used it was 2 nights ago and it worked fine, got downstream of 7mbit.

However, since then I cannot connect anymore. I can connect to my own router fine though (with signal as low as 50%, however its usually 100%)

If I point the adapter the right way, I can get 100% signal quality and 84% signal strength to her router but its always limited connectivity (no internet).

when I leave IP settings as default, its assigning me an IP of something like 70.264.30.22 but when it was working 2 days ago, my IP was 192.168.1.8

The subnet is 255.255.255.0 and the gateway is empty. It also says unkown network

When I set the IP to manual and force myself an IP of 192.168.1.8 (or 192.168.1.X) and the gateway to 192.168.1.1 (which i know is correct, its also in my browser history) it now picks up the network name but still limited connectivity.

When I manually set the IP's I can ping the router and get 4 replies all under 6ms. However I still can't connect.

I cant even open the routers config in browser at 192.168.1.1 It just says error, server never replied any data.

Not sure whats wrong here, it was working fine before and with signal at 84% (100% quality) I thought it should connect no problem.

she isn't at home justnow so I cant reset the router either.

Link to comment
https://www.neowin.net/forum/topic/1128390-wifi-troubles/
Share on other sites

verify your grandmothers settings on her router, check the IP on her computer and see if she can get out. then check your settings.

yeah thats my next plan, unfortunately shes not home but will do this as soon as she is.

Just dont understand why it connected fine before on auto IP but now im having to manually set the IP to even get a connection.

It could be her router crapped out, some third party routers do that and are fine after a reboot. Or perhaps your gran enabled mac filtering :D

haha could be the first one. Definitely not the second! haha she can get to facebook thats about it! I've seen her type google into google! rofl!

Also, even if it were MAC filtering, i would get an error or something rather than just no IP or SSID until i manually set an IP.

Link to comment
https://www.neowin.net/forum/topic/1128390-wifi-troubles/#findComment-595423574
Share on other sites

I've seen her type google into google!

Heh I think that's a trait with old people. To come to think of it, you're right if mac filtering was enabled, you wouldn't be able to connect to the network. Try the following commands in elevated command prompt:

ipconfig/release

ipconfig/flushdns

Then disable your wired adapter if you are wired leaving only the wireless adapter enabled enter these in command prompt:

ipconfig/renew

ipconfig/registerdns

Now connect to her network after and see if there's any change:

Link to comment
https://www.neowin.net/forum/topic/1128390-wifi-troubles/#findComment-595423586
Share on other sites

Heh I think that's a trait with old people. To come to think of it, you're right if mac filtering was enabled, you wouldn't be able to connect to the network. Try the following commands in elevated command prompt:

ipconfig/release

ipconfig/flushdns

Then disable your wired adapter if you are wired leaving only the wireless adapter enabled enter these in command prompt:

ipconfig/renew

ipconfig/registerdns

Now connect to her network after and see if there's any change:

No still no change :(

Dont get this at all. When I leave it at auto, the router assigns me no IP which Is why I dont get connectivity obviously

when I manually do it, all I can do is ping the router

I was just thinking that her router has one of those connect buttons, you know you press it and then connect to it. Maybe thats why I can't connect?

However, I've never had a problem before :s

setup remote access like teamviewer or logmein free so that you can troubleshoot when she isn't home.

Thats a great idea :) I will definitely do that in the future

Link to comment
https://www.neowin.net/forum/topic/1128390-wifi-troubles/#findComment-595423602
Share on other sites

Hmm that's odd. Does your gran have an ADSL or Cable connection?

ADSL

Cant figure this out at all, don't think she will be home till atleast tomorrow either.

looks like I may just have to put up with throttling for a day or two :(

I would put it down to the distance, had I not connected before and have signal of 84%

Link to comment
https://www.neowin.net/forum/topic/1128390-wifi-troubles/#findComment-595423628
Share on other sites

Is it possible to sign into the router and check logs? I know with mine there is an option (though depending on the modem) this sometimes can only be checked when connected directly to it.

That may shed some light - on what is going on.

afraid not, once I manually set IP, the network ID comes up (rather than unidentified network) and I can ping 192.168.1.1 but can't visit in browser :(

Link to comment
https://www.neowin.net/forum/topic/1128390-wifi-troubles/#findComment-595423634
Share on other sites

I have seen this once a while ago- you may want to check to see for example if the device is set to hibernate on the computer it is attached to... In other words let us say your grann'ys computer goes to sleep so it will tell the modem to hibernate as well (it didn't before because you were using it) Just a thought.

That is just a thought of something to check based upon the -- it was working -- then poof no internet.

also have this a look --

http://support.microsoft.com/kb/813827

Link to comment
https://www.neowin.net/forum/topic/1128390-wifi-troubles/#findComment-595423640
Share on other sites

I have a sneaky suspicion her modem/router has lost its WAN connection or it may have a built in feature to auto disconnect from the ISP after a certain amount of time idle. When your nan gets back ask her to cycle power the modem/router's power and I'm sure you should be able to connect again without a problem

Link to comment
https://www.neowin.net/forum/topic/1128390-wifi-troubles/#findComment-595423644
Share on other sites

Are you with virgin media?

One thing I don't understand about throttling is that their throttling gets the internet slow to a crawl when I download a certain amouth with a wired connection but itcs normal when downoading through a wireles connection... :s

Why is this? Anyone else experienced the same? :confused:

Link to comment
https://www.neowin.net/forum/topic/1128390-wifi-troubles/#findComment-595423688
Share on other sites

Thanks for the further tips guys, I'm thinking you could be right, I haven't spoken to her for a few days but last time I was logged in I did notice she hadn't been connected for atleast a day before that and she is the only user.

I am with Sky but they have no hardware in our exchange so they are reselling BT. Therefore we can only get Sky Connect which is throttled between 5 and 1AM

BT don't throttle in my area as its their hardware, thats who Gran is with and who we will be switching to in a month when our Sky contract is up :)

EDIT:

Been doing some reading and the 169.254.x.x IP I am getting is a Link Local address. Its what windows assigns when the computer doesnt get an IP from the router.

So by me manually assigning the IP, thats why it seems a little better when infact it isn't. The router is still doing (or not doing) the same thing.

Guess I'll just need to wait until she is home to reboot it and like others have said, I suspect that will fix the problems.

(Or maybe I could somehow cut the power to her house to restart it :laugh: haha)

Link to comment
https://www.neowin.net/forum/topic/1128390-wifi-troubles/#findComment-595423710
Share on other sites

Thanks for the further tips guys, I'm thinking you could be right, I haven't spoken to her for a few days but last time I was logged in I did notice she hadn't been connected for atleast a day before that and she is the only user.

I am with Sky but they have no hardware in our exchange so they are reselling BT. Therefore we can only get Sky Connect which is throttled between 5 and 1AM

BT don't throttle in my area as its their hardware, thats who Gran is with and who we will be switching to in a month when our Sky contract is up :)

EDIT:

Been doing some reading and the 169.254.x.x IP I am getting is a Link Local address. Its what windows assigns when the computer doesnt get an IP from the router.

So by me manually assigning the IP, thats why it seems a little better when infact it isn't. The router is still doing (or not doing) the same thing.

Guess I'll just need to wait until she is home to reboot it and like others have said, I suspect that will fix the problems.

(Or maybe I could somehow cut the power to her house to restart it :laugh: haha)

Definitely sounds like something has gone wrong her end, if shes not in the house atm, maybe shes unplugged a few things, you know how oaps are for worrying ;)

Link to comment
https://www.neowin.net/forum/topic/1128390-wifi-troubles/#findComment-595423786
Share on other sites

its maybe only even 2 depending on how its counted

5-----7------9 -----11

^gran---------------^us

If there was a way to lay some Ethernet, I can't stress enough how wrong it would be for you to get a mate or two and a jimmy/crow bar (commonly called breaker bar from the local hardware stores) and lift the slabs outside your house to slip under some cable or even throw Ethernet cable up into the cutters (if you're in terraced houses). I certainly wouldn't advise taking a spade, sticking it in garden at the front or rear about a foot down to make a trench and then dropping the cable in and pressing it back so it doesn't look like you've been digging.. nope. I've never done anything like that and you shouldn't either! while these ideas and any others you can think of to get Ethernet connected between you and your gran are much better then wireless for connectivity you shouldn't do it. It might seem attractive for 30meters worth of cat5 for around ?8 to get gigabit (using cat6) connectivity when you only want to use her internet... hmm, at least you don't have to worry about lightning with wireless right.

Link to comment
https://www.neowin.net/forum/topic/1128390-wifi-troubles/#findComment-595423894
Share on other sites

If there was a way to lay some Ethernet, I can't stress enough how wrong it would be for you to get a mate or two and a jimmy/crow bar (commonly called breaker bar from the local hardware stores) and lift the slabs outside your house to slip under some cable or even throw Ethernet cable up into the cutters (if you're in terraced houses). I certainly wouldn't advise taking a spade, sticking it in garden at the front or rear about a foot down to make a trench and then dropping the cable in and pressing it back so it doesn't look like you've been digging.. nope. I've never done anything like that and you shouldn't either! while these ideas and any others you can think of to get Ethernet connected between you and your gran are much better then wireless for connectivity you shouldn't do it. It might seem attractive for 30meters worth of cat5 for around ?8 to get gigabit (using cat6) connectivity when you only want to use her internet... hmm, at least you don't have to worry about lightning with wireless right.

I did think about putting a cable up in the guttering as it is terraced houses lol!

Not worth it now though as I have the long range wifi and we will be changing providers soon and wont have any more throttling to put up with :)

Link to comment
https://www.neowin.net/forum/topic/1128390-wifi-troubles/#findComment-595424548
Share on other sites

"its assigning me an IP of something like 70.264.30.22"

Well I highly doubt it was anything like to be honest, for starters 264 is not even a valid octet ;)

I would guess the IP was APIPA, and started with 169.254.x.x

This is the automatic random IP many OSes setup when set for DHCP and no dhcp server answers.

Nothing to be done until you can check the router - for all we know she turned on mac filtering ;) You say you can ping her router, can you access it via its remote console. This is quite often disabled via wireless in the first place as a security measure, etc. But you could try - if you can then you can verify it has wan connection and its dhcp server is on, etc.

Link to comment
https://www.neowin.net/forum/topic/1128390-wifi-troubles/#findComment-595424708
Share on other sites

"its assigning me an IP of something like 70.264.30.22"

Well I highly doubt it was anything like to be honest, for starters 264 is not even a valid octet ;)

I would guess the IP was APIPA, and started with 169.254.x.x

This is the automatic random IP many OSes setup when set for DHCP and no dhcp server answers.

Nothing to be done until you can check the router - for all we know she turned on mac filtering ;) You say you can ping her router, can you access it via its remote console. This is quite often disabled via wireless in the first place as a security measure, etc. But you could try - if you can then you can verify it has wan connection and its dhcp server is on, etc.

yeah sorry I didn't copy the IP down that was written from memory (only glanced at it). Yes you are correct it was 169.254 :) I realised my mistake when I posted later about the Link Local IP (169.254.x.x)

Yeah I will just have to wait until she is home.

I can ping 192.168.1.1 but if I visit that in browser then it just times out. Chrome gives me error of server didn't respond with any data (or words to that effect)

Link to comment
https://www.neowin.net/forum/topic/1128390-wifi-troubles/#findComment-595424808
Share on other sites

Its very bad practice to allow router admin gui access from wireless - I would hope most routers have this disabled by default..

Or it could be that just the router has crashed and all its really doing is answering pings. Which would explain why you can not get on the internet even if you setup an IP on its range and point to it as gateway. You sure that is the routers IP your pointing to for gateway and dns, and not some other IP on the network ;)

The most likely issue is router is just hosed/crashed/hung, etc. And a reboot will fix it up.

Link to comment
https://www.neowin.net/forum/topic/1128390-wifi-troubles/#findComment-595424824
Share on other sites

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Vivaldi version 8.0.4033.50 released June 17: https://vivaldi.com/blog/desktop/minor-update-eight-8-0/
    • The Online part hasn't even been announced and probably won't be included on day one. This is a massive singleplayer game.
    • While I agree with all that, it just proves there's an a** built for every seat.
    • Lol are you mad because I'm not using AI? I'd rather pay people than lose a bunch of potential customers and get humilated because I used AI. A lot of people won't purchase a game if it used AI during development.
    • LibreWolf 152.0-1 by Razvan Serea LibreWolf is an independent “fork” of Firefox, with the primary goals of privacy security and user freedom. It is the community run successor to LibreFox. LibreWolf is designed to increase protection against tracking and fingerprinting techniques, while also including a few security improvements. This is achieved through our privacy and security oriented settings and patches. LibreWolf also aims to remove all the telemetry, data collection and annoyances, as well as disabling anti-freedom features like DRM. LibreWolf features: Latest Firefox — LibreWolf is compiled directly from the latest build of Firefox Stable. You will have the the latest features, and security updates. Independent Build — LibreWolf uses a build independent of Firefox and has its own settings, profile folder and installation path. As a result, it can be installed alongside Firefox or any other browser. No phoning home — Embedded server links and other calling home functions are removed. In other words, minimal background connections by default. User settings updates Extensions firewall: limit internet access for extensions. Multi-platform (Windows/Linux/Mac/and soon Android) Community-Driven Dark theme (classic and advanced) LibreWolf privacy features: Delete cookies and website data on close. Include only privacy respecting search engines like DuckDuckGo and Searx. Include uBlockOrigin with custom default filter lists, and Tracking Protection in strict mode, to block trackers and ads. Strip tracking elements from URLs, both natively and through uBO. Enable dFPI, also known as Total Cookie Protection. Enable RFP which is part of the Tor Uplift project. RFP is considered the best in class anti-fingerprinting solution, and its goal is to make users look the same and cover as many metrics as possible, in an effort to block fingerprinting techniques. Always display user language as en-US to websites, in order to protect the language used in the browser and in the OS. Disable WebGL, as it is a strong fingerprinting vector. Prevent access to the location services of the OS, and use Mozilla's location API instead of Google's API. Limit ICE candidates generation to a single interface when sharing video or audio during a videoconference. Force DNS and WebRTC inside the proxy, when one is being used. Trim cross-origin referrers, so that they don't include the full URI. Disable link prefetching and speculative connections. Disable disk cache and clear temporary files on close. Disable form autofill. Disable search and form history...and more. LibreWolf 152.0-1 changelog: Upstream release, see the Firefox 152.0 Release Notes Notable changes: The AppImages are now built on Codeberg along with the other releases We have decided to wait a bit longer to enable the settings redesign, due to use being aware of multiple upstream issues Download: LibreWolf 64-bit | Portable 64-bit | ~100.0 MB (Open Source) Download: ARM64 | Portable ARM64 Links: LibreWolf Home Page | Addons | Screenshot | Reddit Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • Week One Done
      Huge Trailer earned a badge
      Week One Done
    • Week One Done
      Classifyskilleducation earned a badge
      Week One Done
    • One Month Later
      eurospharma62 earned a badge
      One Month Later
    • Week One Done
      With What earned a badge
      Week One Done
    • Week One Done
      Harris Gilbert earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      560
    2. 2
      +Edouard
      169
    3. 3
      PsYcHoKiLLa
      73
    4. 4
      Michael Scrip
      64
    5. 5
      ATLien_0
      64
  • Tell a friend

    Love Neowin? Tell a friend!