Coolermaster HAF case Replacement


Recommended Posts

I have a coolermaster HAF case, I have no idea which version it is, though for my question I think it does not matter.

You know those covers that are on the case before adding an optical drive? Well I threw mine out a long time ago when I built my system, thinking I will never need it again.

I am now moving forward into the future, I have 2 optical drives that I am selling because I never use it, all USB. (and i do have other ways in case I do need it).

But now I have a big hole in the front of my case.

Anyone know where I can get a part like that, I don't even know what to search for. How do I find out which version of the HAF case I have?

Link to comment
https://www.neowin.net/forum/topic/1129024-coolermaster-haf-case-replacement/
Share on other sites

Here it is, it's apart for other reasons at the moment. Hopefully they are good enough images for someone to know which version. Looking for the cover, and just based off how that looks, I think it's a 932.

eEAMG.jpg

k7oyx.jpg

EgYKN.jpg

That's the original version the 932. I can confirm that.

Yup, my brother has the same one too

I only have 1 x card reader in mine and all the rest are blanked and its been a few years since I bought the case so if I did have any spares, I have no idea where they would be, plus its the 922 not the 932, I expect they will fit but haven't tested it

I`ll have a look tomorrow but don't expect much, I haven't come across any for at least a year or more, ebay is your friend for this one

What about adding an usb3 front panel or some hard drive racks? The racks always useful and there are some which are screw-less (you just insert the 3.5 hard drive and close the bay and the connectors snap in place).

I am purchasing a new hard drive tomorrow, and the hard part is the power and sata cable is still up near where the blu-ray drive was, and it's going to take awhile to move it down to the buttom.

Do these hard drive racks have a cover for them too?

That's a good case with good internal layout; side loading 3.5" drives, bottom PSU, decent cable managment space, and decent air flow. You can contact coolermaster for replacement bay covers.

The only thing I don't like about this case, is it's not painted black on the inside.

On Coolermaster's website, they have a "Request Parts" page. I recall using it myself a while back, and I think they may have even sent it out for free IIRC. Worth a shot at least.

If I don't get any from here or other sites, then yea I will use that request page. Thanks guys.

That's a good case with good internal layout; side loading 3.5" drives, bottom PSU, decent cable managment space, and decent air flow. You can contact coolermaster for replacement bay covers.

The only thing I don't like about this case, is it's not painted black on the inside.

Yea, have had it for quite some time, it's an awesome case. But I agree, being painted black inside looks much better.

I have another question about the case.

My front 120mm Red LED fan has been dying. What I mean is first, the LED lights seem to be much dimmer now, also the bigger problem is that the fan will stop spinning randomly.

Not sure how long, but it stops 100%. I try to spin it to get it going and nothing happens, after awhile, not sure how long, I try again it starts spinning. Happens randomly.

Is this a problem with the fan, or is it a problem with the motherboard (its plugged into the motherboard).

I am hoping to find some in town near me from someone who doesn't want them (free).

If not thank you very much, that's everything I was looking for. I guess the 120mm fan I was talking about is actually 230mm.

The only problem might be, its the US store, I am in Canada. We will see.

*To my previous question, how do I know if it's my motherboard or fan that is problematic?

I am hoping to find some in town near me from someone who doesn't want them (free).

If not thank you very much, that's everything I was looking for. I guess the 120mm fan I was talking about is actually 230mm.

The only problem might be, its the US store, I am in Canada. We will see.

*To my previous question, how do I know if it's my motherboard or fan that is problematic?

i figured that much and i checked that before posting :) "We only ship to US and Canada Only." good luck.

  • 3 weeks later...

So I haven't tested the fan, because it's all done a way and I can't seem to find where the fan is plugged into.

Though my side case fan I had off for awhile, just plugged it back in to put the side door on, and it isn't spinning. There are only 2 spots to plug in a fan as far as I can see, so I test the other port and it's still not spinning.

So, would that indicate a problem with the motherboard, or could that still be the two fans now? They are old enough I suppose.

I just don't want to go by some fans, and have them still not work. Anyway I can test it...

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Because Chrome is doing it. And no one said anyone had to update immediately. That's silly. They could update every day for all I care as long as it's fast, and the next time the browser restarts, you're good. And the basic point is not to tee it up for bigger updates. As it is right now, all the windows I had open reopen anyway except inprivate.
    • Why? Does anybody actually want this? The constant need to close all browser sessions and wait for a new version to install, just so that there’s a integrated coupon manager feels like a waste of everyone’s time
    • I remember when Louis used to just do interesting Mac/iPhone repairs, now he's boring and just launches "crusades" every week
    • A shame it don't allow people to bypass the MS account, I will stick to using Rufus.
    • Microsoft about to radically change how often your Edge browser updates by Paul Hill Microsoft has just announced that starting with Edge 152, it will be moving to a two-week release cycle for faster, smaller updates. This faster release cadence will begin on August 27. This change comes just several months after Microsoft switched Visual Studio Code to weekly updates. The company said that the Extended Stable releases will remain on an eight-week cycle and that no admin changes are needed to experience the faster release cycle on the Stable channel. The new two-week release cycle will enable the faster delivery of security updates and platform improvements, all while reducing the size and complexity of individual updates. Microsoft claims that organizations will benefit from this change as it offers predictable validation cycles. For organizations that prefer a “more deliberate pace”, the Extended Stable channel remains an option. This change will affect Edge Stable releases on Windows, macOS, Linux, and mobile. The Extended Stable channel will continue to be updated every eight weeks, or every fourth Stable release, for example: versions 152, 156, 160, and 164. The Extended Stable could be a good option for organizations that don’t want the latest updates twice a month and don’t want as much hassle constantly updating browsers. In the case of Visual Studio Code, many of the updates being pushed by Microsoft are AI-related. As we all know, Microsoft Edge has a lot of AI features, so we could see Microsoft pushing more AI, thanks to the faster cycles. On the flip side, quicker releases could mean faster security updates, which is beneficial in a world where AI systems are hunting for software exploits. What do you think? Let us know in the comments. For more updates on Edge, be sure to follow Neowin's coverage. In May alone, we reported on Edge offering in-browser pop-ups to assist users with website compatibility issues, that Edge was losing Copilot Mode, and that Microsoft had fixed a plain-text password bug in Edge. Source: Microsoft 365 Admin Center
  • Recent Achievements

    • Week One Done
      davidbazooked earned a badge
      Week One Done
    • One Month Later
      Jamswaz earned a badge
      One Month Later
    • Week One Done
      Jamswaz earned a badge
      Week One Done
    • Rookie
      Marzoid went up a rank
      Rookie
    • Community Regular
      coch went up a rank
      Community Regular
  • Popular Contributors

    1. 1
      +primortal
      514
    2. 2
      PsYcHoKiLLa
      185
    3. 3
      +Edouard
      159
    4. 4
      Steven P.
      83
    5. 5
      ATLien_0
      75
  • Tell a friend

    Love Neowin? Tell a friend!