Recommended Posts

I have been playing with Vmware vsphere / ESXi recently, and wanted to play with clustering, and vmotion.

I have 3 Hypervisor servers each with a couple of TB of storage. (2 reasonably powerful machines and one low end at the moment)

I realize I am going to need a SAN to be able to do this.

I have never setup, or even used a SAN before, I am only doing it for the sake of it at the moment and don't want o invest a fortune, I looked on eBay and there is a mass of used equipment, including 4tb arrays for ?300 (or 1tb arrays for ?120 .. http://www.ebay.co.uk/itm/EMC-CLARiiON-CX-2GDAE-1TB-15-x-73GB-FC-SAN-Drive-Storage-Array-RAID-NAS-KAE-/120923778105?pt=UK_Computing_Network_Storage_Disk_Arrays&hash=item1c279e6c39 ).

I thought i might be able to get an array, and a fiber switch, and a few controller cards for the esxi machines, however I also believe I need a SAN controller as well as the array.

Im not sure which equipment is compatible with each other, there are controllers on eBay which aren't bank breaking but i don't know which controllers / switches etc will be compatible with which arrays.

Could someone point me in the right direction please for setting up a SAN on a budget, using retired hardware from eBay (UK)

Thanks

Link to comment
https://www.neowin.net/forum/topic/1129032-new-to-sans/
Share on other sites

Well for a basic poor man's SAN all you need is a machine with lots of storage, some fancy software like say OpenFiler or FreeNAS (though I don't know if FreeNAS does iSCSI or not) and at least a gigabit ethernet connection. Doesn't even have be a dedicated box, you put the software on a VM on one of your hypervisor servers.

This worked well enough for me. Though I only had one machine using it. I can't imagine much difference between one and multiple machines using a SAN.

Link to comment
https://www.neowin.net/forum/topic/1129032-new-to-sans/#findComment-595431478
Share on other sites

Well for a basic poor man's SAN all you need is a machine with lots of storage, some fancy software like say OpenFiler or FreeNAS (though I don't know if FreeNAS does iSCSI or not) and at least a gigabit ethernet connection. Doesn't even have be a dedicated box, you put the software on a VM on one of your hypervisor servers.

This worked well enough for me. Though I only had one machine using it. I can't imagine much difference between one and multiple machines using a SAN.

That's really handy Thanks, I will check it out and have a play with that option.

Any pointers if I want to spend a little ? I don't mind paying out say ?500-700 total to do it for real if that's possible, like i say the retired SAN disc arrays are relatively cheap, its just knowing what else I need.

Link to comment
https://www.neowin.net/forum/topic/1129032-new-to-sans/#findComment-595431498
Share on other sites

Might be cheaper and more reliable to get an empty array and switch rather than using old drives.

Look online and in your local area you can get enterprise equipment inexpensively if you look hard enough. Racks, PDU's KVM IP, 42 port gig switches markets flooded.

You need to thoroughly research though most of the time the sellers only have the part # and no clue what it does,

Link to comment
https://www.neowin.net/forum/topic/1129032-new-to-sans/#findComment-595431502
Share on other sites

Might be cheaper and more reliable to get an empty array and switch rather than using old drives.

Look online and in your local area you can get enterprise equipment inexpensively if you look hard enough. Racks, PDU's KVM IP, 42 port gig switches markets flooded.

You need to thoroughly research though most of the time the sellers only have the part # and no clue what it does,

Absalubtly, The retired gear is all knocking about cheaply enough, I see it locally and on ebay, its just knowing what I need.

You say get an array and a switch, so does that mean I don't need a separate 'San Controller' Device ? is that part of the array ?

For instance if I was to get - http://www.ebay.co.uk/itm/EMC-CLARiiON-CX-2GDAE-1TB-15-x-73GB-FC-SAN-Drive-Storage-Array-RAID-NAS-KAE-/120923778105?pt=UK_Computing_Network_Storage_Disk_Arrays&hash=item1c279e6c39

Would i just need a SAN switch and cables to use it, or do I need another device as well ?

Link to comment
https://www.neowin.net/forum/topic/1129032-new-to-sans/#findComment-595431522
Share on other sites

But the drives are ancient though if its just for learning it would be ok but anything else is a waste of power.

You could save money by getting an enclosure without drives

http://www.ebay.ie/itm/HP-STORAGEWORKS-MSA20-416735-B21-MODULAR-SMART-ARRAY-20-HARD-DRIVE-ENCLOSURE-/290817443229?pt=US_SAN_Disk_Arrays&hash=item43b612059d

Link to comment
https://www.neowin.net/forum/topic/1129032-new-to-sans/#findComment-595431548
Share on other sites

Would you be able to provide more details for us to help you?

Example would be:

How much data would you like to transfer between the systems?

Specs of each system including their model number and current hardware and operating system?

What networking gear you already have available?

Do you want this to be a budget setup as close to the real thing as possible using the bare essentials?

Some things you would normally have for a small setup like this are:

Dual Gigabit switches for failover to connect your servers to your regular network.

Dual Fibre Channel switches for failover to connect your servers to the SAN.

SAN with a minimum of two controllers for failover capabilities and if you have the budget available two SANs for failover in case a SAN fails.

If you do not have the budget for failover you would just have one of each of the above.

Your servers would normally have at least 2 NICs one for connecting to the internet, one for connecting internally, possibly one more NIC for a management network then a fibre channel card or cards in each server to connect them to the SAN or SANs.

Link to comment
https://www.neowin.net/forum/topic/1129032-new-to-sans/#findComment-595431574
Share on other sites

For testing you don't need Fibre Channel and such. If you've got the money, they why not. You'd be better off getting a better storage solution that is a little faster. For testing purposes, even SATA will do the trick. The key is just centralized storage instead of local.

FreeNAS does do iSCSI.

It is recommended, as ITOps mentioned, to use one NIC for regular network and other NIC to the storage network.

Link to comment
https://www.neowin.net/forum/topic/1129032-new-to-sans/#findComment-595431596
Share on other sites

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • The quantum search for Time's origin had an equally mind-boggling conclusion by Sayan Sen Image by Steve Johnson via Pexels A theoretical study from researchers at the University of Surrey suggested that the direction of time may not be fundamentally fixed in certain quantum systems. The work, published in Scientific Reports, examined how the “arrow of time” could emerge from microscopic physics and found that time-reversal symmetry can remain intact even in models used to describe processes such as energy loss and thermalisation. The arrow of time refers to the observed one-way direction from past to future in everyday life. In macroscopic processes, this is easy to see. Spilled milk spreads across a table and does not gather back into a glass, and heat flows from hotter objects to colder ones. These processes shape the common sense idea that time moves in a single direction. However, at the level of fundamental physics, many equations do not prefer a direction of time. Time-reversal symmetry means that the same physical laws can describe a system whether time moves forward or backward. This has made it difficult to explain why irreversible behaviour appears in the large-scale world even when the underlying rules do not require it. Dr Andrea Rocco, Associate Professor in Physics and Mathematical Biology at the University of Surrey, described this contrast: "One way to explain this is when you look at a process like spilt milk spreading across a table, it's clear that time is moving forward. But if you were to play that in reverse, like a movie, you'd immediately know something was wrong – it would be hard to believe milk could just gather back into a glass. However, there are processes, such as the motion of a pendulum, that look just as believable in reverse. The puzzle is that, at the most fundamental level, the laws of physics resemble the pendulum; they do not account for irreversible processes. Our findings suggest that while our common experience tells us that time only moves one way, we are just unaware that the opposite direction would have been equally possible." The study focused on open quantum systems, which are quantum systems that interact with a surrounding environment. This environment, often described as a heat bath, can exchange energy and information with the system. The researchers used this framework to study how a direction of time might appear even when the underlying physics does not enforce one. A key part of the analysis involved the Markov approximation. This is a simplification used in many models where the system is assumed not to retain memory of its past states. The idea is that changes depend only on the current state, not on earlier history. This is commonly used when studying thermalisation, which is the process where a system settles into equilibrium with its environment. The study also used concepts such as master equations, including the Lindblad and Pauli equations, which describe how probabilities of different quantum states change over time. Another related model discussed was quantum Brownian motion, which describes the random-like movement of a quantum particle interacting continuously with its environment. In these descriptions, a “memory kernel” can appear, which is a mathematical term that accounts for how past states influence current behaviour. The researchers found that applying the Markov approximation did not break time-reversal symmetry. Even when the system interacted with an effectively infinite heat bath, the resulting equations of motion remained symmetric in time. This meant that the same mathematical description could, in principle, run forward or backward in time without contradiction. The study further showed that standard frameworks used in open quantum systems, including quantum Brownian motion and master equations like the Lindblad and Pauli forms, could be written in a time-symmetric way. These equations are typically used to describe processes that look irreversible, such as dissipation and thermalisation, but the results suggested they can also be interpreted as allowing evolution in both time directions. Thomas Guff, Research Fellow in Quantum Thermodynamics, said: "The surprising part of this project was that even after making the standard simplifying assumption to our equations describing open quantum systems, the equations still behaved the same way whether the system was moving forwards or backwards in time. When we carefully worked through the maths, we found that this behaviour had to be the case because a key part of the equation, the "memory kernel," is symmetrical in time. We also found a small but important detail which is usually overlooked – a time discontinuous factor emerged that kept the time-symmetry property intact. It’s unusual to see such a mathematical mechanism in a physics equation because it's not continuous, and it was very surprising to see it appear so naturally." The researchers also noted that deriving a one-way arrow of time from time-reversal symmetric microscopic dynamics remains an open problem across fields such as thermodynamics, statistical mechanics, particle physics, and cosmology. Their results suggested that some standard descriptions of irreversible behaviour in open quantum systems may be better understood using a time-symmetric formulation of Markovianity. According to the study, processes such as thermalisation, which are usually treated as irreversible, could in theory be described in a way that allows evolution in either time direction under the same rules. This does not imply that time reversal occurs in everyday life, but rather that the underlying equations do not strictly enforce a single direction. Overall, the findings suggested that the perceived direction of time may emerge from how physical systems are modelled and approximated, rather than from a fundamental asymmetry in the laws themselves. The researchers noted that this perspective could have implications for ongoing work in quantum mechanics, thermodynamics, and cosmology on the origin of time’s arrow. Source: University of Surrey, Nature This article was generated with some help from AI and reviewed by an editor. Under Section 107 of the Copyright Act 1976, this material is used for the purpose of news reporting. Fair use is a use permitted by copyright statute that might otherwise be infringing
    • A bit premature... 100% Marketing. Bizarre.
    • A $300 price hike is insane! No one is going to want to pay that much!
    • Since the 1st one flopped, there is really no reason to make another one. It's just losing money left and right.
  • Recent Achievements

    • Reacting Well
      BizSAR earned a badge
      Reacting Well
    • First Post
      AndreaB earned a badge
      First Post
    • Week One Done
      Huge Trailer earned a badge
      Week One Done
    • Week One Done
      Classifyskilleducation earned a badge
      Week One Done
    • One Month Later
      eurospharma62 earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      581
    2. 2
      +Edouard
      182
    3. 3
      PsYcHoKiLLa
      75
    4. 4
      Michael Scrip
      73
    5. 5
      neufuse
      64
  • Tell a friend

    Love Neowin? Tell a friend!