Recommended Posts

I just bought a Lenovo IdeaCentre H415 (it has an A6-3650 with Radeon 6530D GPU, VGA and HDMI output, but no DVI). My monitor supports VGA, HDMI and DVI. When it's plugged in via VGA, it works as you would expect. When it's plugged in via HDMI - nothing. I've looked around for some option in Display/Personalisation, but nothing is evident that would allow me to do this (nor in the Catalyst Control Centre).

it should work right away when you plug in the cord, so there are 3 possibilities

1. bad hdmi cord

2. the port on the laptop is bad

3. the port on the monitor is bad

(it's also possible, though unlikely, that the drivers weren't installed correctly. have you updated the catalyst drivers?)

  On 04/01/2013 at 16:42, Brando212 said:

it should work right away when you plug in the cord, so there are 3 possibilities

1. bad hdmi cord

2. the port on the laptop is bad

3. the port on the monitor is bad

(it's also possible, though unlikely, that the drivers weren't installed correctly. have you updated the catalyst drivers?)

well, there's more possibilities than that. i thought the sme as StrikedOut. the monitor may need to change its source.

  On 04/01/2013 at 16:45, Jdawg683 said:

well, there's more possibilities than that. i thought the sme as StrikedOut. the monitor may need to change its source.

i figured if that were the case it would still show as a detected output in ccc and screen rez window

since he didn't mention it appearing i figured it probably didn't

I had the same problem and when I read this thread, it dawned on me that I had not thought of there being an "Input Select" option in the monitor settings. Sure enough, that was all my problem was. Now, having my HP laptop connected to my ASUS monitor via HDMI works fine. I had just thought the monitor would work if you had a good connection to a source, but then again, I should have thought about how the monitor would handle it if you had more than one source connected simultaneously, like VGA and HDMI at the same time. In that case, it makes sense that the monitor would have to ask you what source you wanted to use or there would be a "Input Select" option to tell it what source/connection to use.

Another thing to note, when I changed the monitor input selection to HDMI, I had no audio/sound then. I figured the audio was being then sent thru the HDMI cable, but because my monitor doesn't have speakers (I didn't want a monitor with speakers... would rather have decent separate speakers) I wasn't getting any sound. Sure enough, that was it. Once I had opened my audio settings and set "Speakers and Headphones" as the default place/ports to send audio to, my audio/sound was back as usual.

I wasn't able to figure out which key launches the BIOS, but after a couple of reboots it ended up going off HDMI. I did have to do the input select on the monitor as well, which required a complete power cycle to get working. I didn't have the sound problem, possibly because I already have headphones plugged in?

Image quality is much better now.

OK. This isn't working out how I'd like. Whenever the system goes to sleep, it doesn't output anything when waking up. I have to plug VGA back in to have a chance at getting HDMI.

I checked the BIOS, and it only has the option to use Auto or default to a PCI-e GPU.

hmm, it sounds like the hdmi on your graphics card might just be faulty, there's no reason your hdmi should be acting like that, it should just work when it's plugged in unless you explicitly turn off that input yourself (which can only be done while it's plugged in and detected)

if you're able to, I'd think about taking the graphics card back and exchanging it as I doubt it's a driver problem at this point

Have you tried hooking up to another monitor/TV using HDMI, just to narrow things down?

It should just work right off the bat. You normally don't have to change anything, other than switch to the specific HDMI port on the monitor/TV.

  On 06/01/2013 at 01:45, migo said:

It's integrated, part of the A6-3650.

well that complicates things a little if it is indeed faulty

just to be sure, you do have the official AMD 12.10 drivers installed and not the drivers supplied by Lenovo correct?

if not, try the official AMD driver or vice-verse

Having one of the AMD integrated GPU/CPU's myself, I literally plugged in HDMI to the motherboard (which came with an HDMI port) and away I went. If your HDMI is not functioning properly it's due to one of a few things...

1.) Something is incorrectly setup in your BIOS (as the HDMI port is provided by your motherboard. You should make sure your BIOS settings indicate the system should use the integrated graphics from the GPU/CPU)

2.) AMD drivers for your integrated GPU are not functioning properly/corrupt/etc. (Try uninstalling/reinstalling the drivers)

3.) Or it's defective.

Do you have a television you can plug into using HDMI? See how it function while connected to that. If it works fine, it's most likely an issue with your monitor. If it continues to misbehave, it is definitely your system.

  On 06/01/2013 at 08:44, migo said:

I do have a TV I could plug in, but that would be a fair amount of effort lugging everything over. I'll try that if everyone's out of ideas.

Sure...however I'd want to know if it's the machine or the monitor pretty quick. Especially if I have to RMA something. I wouldn't wait too long ;) You really don't need to take "everything". The tower, the HDMI cable and the power cable for the tower and mouse/keyboard? You don't need anything else. All you really need to do is turn it on. If the TV pops on and displays, fantastic. If you want to wait for it to auto turn off the TV or go to sleep and then wake it to see if it jumps back, even better.

OK, so I observed the scanning process while the system was waking up. The monitor attempted to get a signal via HDMI, but there simply wasn't one.

It would appear it's a Windows 8 issue, as someone else is having the same issue, except only with Windows 8, and not Windows 7. I think I'll just put up with it. I'd have to spend a couple hundred dollars more to get a remotely comparable system with DVI (or buy a video card, which will probably run into a CPU bottleneck, and I'd need to spend more for a system with even a Core-i3).

  On 06/01/2013 at 23:07, migo said:

I'd have to spend a couple hundred dollars more to get a remotely comparable system with DVI (or buy a video card, which will probably run into a CPU bottleneck, and I'd need to spend more for a system with even a Core-i3).

if you want to connect to monitor dvi, a simple hdmi - dvi adapter/cable will work.

  On 06/01/2013 at 23:07, migo said:

OK, so I observed the scanning process while the system was waking up. The monitor attempted to get a signal via HDMI, but there simply wasn't one.

It would appear it's a Windows 8 issue, as someone else is having the same issue, except only with Windows 8, and not Windows 7. I think I'll just put up with it. I'd have to spend a couple hundred dollars more to get a remotely comparable system with DVI (or buy a video card, which will probably run into a CPU bottleneck, and I'd need to spend more for a system with even a Core-i3).

My HTPC (the one with the integrated graphics CPU in it) is running on Windows 8. I don't have this issue, at least not on my TV.

This topic is now closed to further replies.
  • Posts

    • Lets assume that we are capitalists and right wing people for a sec. - The individual should be able to accrue wealth and no government should limit that wealth growth. - That same individual should not be taxed any higher than the average person. Tax is a socialist construct to help those in that country who are less fortunate, and it limits wealth growth. - This individual should be able to do whatever they want to do with their money and have no restrictions, as it would otherwise limit wealth growth. So having said all that with the mindset of a capitalist and small government political leaning, he can do what he want with it. Some billionaires have little pet projects to inflate their self worth like rocket ships and stuff, this is just a bit different is al, and probably the more compassionate of choices. I think he's seen a need, and that need isn't in the USA.
    • I'm concerned about this, too. How can he make sure that the money is actually used for good instead of ending up in the pockets of crooked politics and warlords? I think that's a problem.
    • Sony unveils its first fight stick 'Project Defiant', supports PC and PS5 by Pulasthi Ariyasinghe In a surprise twist, Sony announced a new piece of hardware at its State of Play presentation today. Currently going by the codename Project Defiant, it is Sony's first attempt at making a fight stick. Considering the company is currently partnered with Marvel to make a first-party fighting game featuring heroes and villains from the popular comic universe, this seems to be the right time to unveil the project. As seen in the teaser trailer above, the wireless fight stick follows the modern black and white PlayStation hardware style of the consoles and standard gamepad controllers. The controller will ship with a toolless design for changing the restrictor gates, with square, circle, and octagon options incoming for the stick. Meanwhile, the buttons are confirmed to have mechanical switches. Plus, a dedicated touchpad, much like on the DualSense controller, is available on the top of the fight stick. "It’s built in a sturdy, ergonomic design for a comfortable feel during intense fight sessions," adds the company. Sony is leveraging its PlayStation Link technology in the device. With it, the company is promising ultra-low latency wireless connectivity, making sure it provides players "precise in-game response to each button press and digital stick movement." Interestingly, PlayStation Link is Sony's proprietary wireless connectivity standard designed for PlayStation 5's audio transmissions, which is now being used a little differently for this piece of hardware. The controller has built-in storage for holding both the restrictor gates and the PS Link USB adapter. As expected, a wired connection is also possible, with a USB-C port available on the device for connecting to a PlayStation 5 or PC. To make sure the device remains in good condition during travel, Sony is throwing in a sturdy sling carry case with each Project Defiant fight stick. More details, like the official name, internal hardware, release date, and most importantly, price, will be revealed later. The hardware has a 2026 launch window right now.
  • Recent Achievements

    • First Post
      James courage Tabla earned a badge
      First Post
    • Reacting Well
      James courage Tabla earned a badge
      Reacting Well
    • Apprentice
      DarkShrunken went up a rank
      Apprentice
    • Dedicated
      CHUNWEI earned a badge
      Dedicated
    • Collaborator
      DarkShrunken earned a badge
      Collaborator
  • Popular Contributors

    1. 1
      +primortal
      351
    2. 2
      snowy owl
      167
    3. 3
      +FloatingFatMan
      164
    4. 4
      ATLien_0
      162
    5. 5
      Xenon
      128
  • Tell a friend

    Love Neowin? Tell a friend!