Recommended Posts

I just bought a Lenovo IdeaCentre H415 (it has an A6-3650 with Radeon 6530D GPU, VGA and HDMI output, but no DVI). My monitor supports VGA, HDMI and DVI. When it's plugged in via VGA, it works as you would expect. When it's plugged in via HDMI - nothing. I've looked around for some option in Display/Personalisation, but nothing is evident that would allow me to do this (nor in the Catalyst Control Centre).

it should work right away when you plug in the cord, so there are 3 possibilities

1. bad hdmi cord

2. the port on the laptop is bad

3. the port on the monitor is bad

(it's also possible, though unlikely, that the drivers weren't installed correctly. have you updated the catalyst drivers?)

  On 04/01/2013 at 16:42, Brando212 said:

it should work right away when you plug in the cord, so there are 3 possibilities

1. bad hdmi cord

2. the port on the laptop is bad

3. the port on the monitor is bad

(it's also possible, though unlikely, that the drivers weren't installed correctly. have you updated the catalyst drivers?)

well, there's more possibilities than that. i thought the sme as StrikedOut. the monitor may need to change its source.

  On 04/01/2013 at 16:45, Jdawg683 said:

well, there's more possibilities than that. i thought the sme as StrikedOut. the monitor may need to change its source.

i figured if that were the case it would still show as a detected output in ccc and screen rez window

since he didn't mention it appearing i figured it probably didn't

I had the same problem and when I read this thread, it dawned on me that I had not thought of there being an "Input Select" option in the monitor settings. Sure enough, that was all my problem was. Now, having my HP laptop connected to my ASUS monitor via HDMI works fine. I had just thought the monitor would work if you had a good connection to a source, but then again, I should have thought about how the monitor would handle it if you had more than one source connected simultaneously, like VGA and HDMI at the same time. In that case, it makes sense that the monitor would have to ask you what source you wanted to use or there would be a "Input Select" option to tell it what source/connection to use.

Another thing to note, when I changed the monitor input selection to HDMI, I had no audio/sound then. I figured the audio was being then sent thru the HDMI cable, but because my monitor doesn't have speakers (I didn't want a monitor with speakers... would rather have decent separate speakers) I wasn't getting any sound. Sure enough, that was it. Once I had opened my audio settings and set "Speakers and Headphones" as the default place/ports to send audio to, my audio/sound was back as usual.

I wasn't able to figure out which key launches the BIOS, but after a couple of reboots it ended up going off HDMI. I did have to do the input select on the monitor as well, which required a complete power cycle to get working. I didn't have the sound problem, possibly because I already have headphones plugged in?

Image quality is much better now.

OK. This isn't working out how I'd like. Whenever the system goes to sleep, it doesn't output anything when waking up. I have to plug VGA back in to have a chance at getting HDMI.

I checked the BIOS, and it only has the option to use Auto or default to a PCI-e GPU.

hmm, it sounds like the hdmi on your graphics card might just be faulty, there's no reason your hdmi should be acting like that, it should just work when it's plugged in unless you explicitly turn off that input yourself (which can only be done while it's plugged in and detected)

if you're able to, I'd think about taking the graphics card back and exchanging it as I doubt it's a driver problem at this point

Have you tried hooking up to another monitor/TV using HDMI, just to narrow things down?

It should just work right off the bat. You normally don't have to change anything, other than switch to the specific HDMI port on the monitor/TV.

  On 06/01/2013 at 01:45, migo said:

It's integrated, part of the A6-3650.

well that complicates things a little if it is indeed faulty

just to be sure, you do have the official AMD 12.10 drivers installed and not the drivers supplied by Lenovo correct?

if not, try the official AMD driver or vice-verse

Having one of the AMD integrated GPU/CPU's myself, I literally plugged in HDMI to the motherboard (which came with an HDMI port) and away I went. If your HDMI is not functioning properly it's due to one of a few things...

1.) Something is incorrectly setup in your BIOS (as the HDMI port is provided by your motherboard. You should make sure your BIOS settings indicate the system should use the integrated graphics from the GPU/CPU)

2.) AMD drivers for your integrated GPU are not functioning properly/corrupt/etc. (Try uninstalling/reinstalling the drivers)

3.) Or it's defective.

Do you have a television you can plug into using HDMI? See how it function while connected to that. If it works fine, it's most likely an issue with your monitor. If it continues to misbehave, it is definitely your system.

  On 06/01/2013 at 08:44, migo said:

I do have a TV I could plug in, but that would be a fair amount of effort lugging everything over. I'll try that if everyone's out of ideas.

Sure...however I'd want to know if it's the machine or the monitor pretty quick. Especially if I have to RMA something. I wouldn't wait too long ;) You really don't need to take "everything". The tower, the HDMI cable and the power cable for the tower and mouse/keyboard? You don't need anything else. All you really need to do is turn it on. If the TV pops on and displays, fantastic. If you want to wait for it to auto turn off the TV or go to sleep and then wake it to see if it jumps back, even better.

OK, so I observed the scanning process while the system was waking up. The monitor attempted to get a signal via HDMI, but there simply wasn't one.

It would appear it's a Windows 8 issue, as someone else is having the same issue, except only with Windows 8, and not Windows 7. I think I'll just put up with it. I'd have to spend a couple hundred dollars more to get a remotely comparable system with DVI (or buy a video card, which will probably run into a CPU bottleneck, and I'd need to spend more for a system with even a Core-i3).

  On 06/01/2013 at 23:07, migo said:

I'd have to spend a couple hundred dollars more to get a remotely comparable system with DVI (or buy a video card, which will probably run into a CPU bottleneck, and I'd need to spend more for a system with even a Core-i3).

if you want to connect to monitor dvi, a simple hdmi - dvi adapter/cable will work.

  On 06/01/2013 at 23:07, migo said:

OK, so I observed the scanning process while the system was waking up. The monitor attempted to get a signal via HDMI, but there simply wasn't one.

It would appear it's a Windows 8 issue, as someone else is having the same issue, except only with Windows 8, and not Windows 7. I think I'll just put up with it. I'd have to spend a couple hundred dollars more to get a remotely comparable system with DVI (or buy a video card, which will probably run into a CPU bottleneck, and I'd need to spend more for a system with even a Core-i3).

My HTPC (the one with the integrated graphics CPU in it) is running on Windows 8. I don't have this issue, at least not on my TV.

This topic is now closed to further replies.
  • Posts

    • It's a Developer Beta 1 not even a Public or User Beta, I doubt any of the design is 100% finalized yet.
    • Was going to comment the same thing. It's SO annoying to have to go back to settings every time I install something new or some apps like discord update and the icon is hidden again.
    • XRECODE3 1.167 by Razvan Serea xrecode3 is a converter and audio-grabber which allows you to convert from mp3, mp2, wma, aiff, amr, ogg, flac, ape, cue, ac3, wv, mpc, mid, cue ,tta, tak, wav, wav(rf64), dts, m4a, m4b, mp4, ra, rm, aac, avi, mpg, vob, mkv, mka, flv, swf, mov, ofr, wmv, divx, m4v, spx, 3gp, 3g2, m2v, m4v, ts, m2ts, adts, shn, tak, xm, mod, s3m, it, mtm, umx, mlp to m4a, alac, ape, flac, mp3, mp4 (using NeroAAC), ogg, raw, wav, wav(rf64), wma, WavPack, mpc, mp2, Speex, ofr, ac3, aiff, tak, snd and Shorten formats. Command Line parameters are supported. XRECODE3 features: Works on XP, Vista, Windows 7, Windows 8, 10 32/64 bit versions and under Wine. Parallel conversion by utilizing power of multi-core CPUs. Support of embedded CUE sheets (for FLAC, WavPack, APE and TAK files). Support of mp4, mka chapters (can split mp4, mka by chapters to any supported format). Built-in Metadata editor with Cover Art support. Has support for LossyWav. Supports portable mode. Merge input files to one large audio file and create CUE sheet. Converting to many formats at once using "Multiple" output mode. Grabbing of multi-channel Audio CDs to the desired format at once. Informative and resizable UI suited even for netbooks. Extracting audio from flv, avi, mov etc. video files (multiple audio streams are supported). Can export/import Metadata to/from external file. Support for 24/32bit audio files. Multilanguage support. Currently program is available in Dutch, English, French, Japanese, Korean, Polish, Russian, Hungarian, Italian, Spanish, Spanish Traditional, Swedish, Brazilian Portuguese, German, Finnish, Bulgarian, Czech, Danish and Chinese (simplified) languages. What's new in XRECODE3: Native 64bit support. Added support for DSD/DST and DFF formats (including handling of SACD ISOs). Added option to extract audio without transcoding. Added option to encode several files to one multi-channel file. Added option to split file into individual track-per-channel for all available output formats. Added option to merge files per folder. Output and Metadata settings are now output format specific. Enhanced Metadata settings. Added support for multiple Cover pictures in Metadata editor. Added 32bit int/float output for formats which support them (e.g. WAV). Added dithering option in Output Settings. Added option to use EBUR128 in Normalize. Added option to Album Mode Normalize. Added option to configure Matrices under Output Settings. Added more output file pattern elements. Tabbed UI. CUE files are now displayed more nicely. Enhanced Shell Extension. XRECODE3 1.167 changelog: Added option to handle YEAR and DATE tags (under Settings/Metadata/Advanced). Updated to the latest qaac (2.85). Download: XRECODE3 v1.167 (64-bit) | Portable | ~30.0 MB (Shareware) Download: XRECODE3 v1.167 (32-bit) | Portable Link: XRECODE3 Homepage | XRECODE3 Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Hasleo Disk Clone 5.2.2.1 by Razvan Serea Hasleo Disk Clone is a free and all-in-one disk cloning software for Windows 11/10/8/7/Vista and Windows Server that can help you migrate Windows OS to another disk, clone one disk to another disk or clone one partition to another location quickly and efficiently. Completely Free Windows Migration and Disk/Partition Cloning Software Migrate Windows from one disk to another without reinstalling Windows, apps. Clone one disk to another and makes the data on 2 disks are exactly the same. Clone a partition to another location without losing any data. Easily adjust the size and location of the destination partition. Convert MBR to GPT or convert GPT to MBR by cloning. Creation of Windows PE emergency disk. Extremely fast cloning speed and multi-language support. Supported OS: Windows Vista/Server 2008 or later, fully compatible with GPT and UEFI. Note: Hasleo Disk Clone 5.2.2.1 changelog is not yet available. Download: Hasleo Disk Clone 5.2.2.1 | 28.8 MB (Freeware) Link: Hasleo Disk Clone Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Shouldn't using "High Performance" mode prevent c-states from initializing? Maybe AMD hasn't built a proper power plan for their x3d processors like they used to for their ryzen chips.
  • Recent Achievements

    • First Post
      Johnny Mrkvička earned a badge
      First Post
    • Week One Done
      viraltui earned a badge
      Week One Done
    • One Month Later
      serfegyed earned a badge
      One Month Later
    • Dedicated
      firey earned a badge
      Dedicated
    • Dedicated
      fettermanj earned a badge
      Dedicated
  • Popular Contributors

    1. 1
      +primortal
      634
    2. 2
      ATLien_0
      229
    3. 3
      Michael Scrip
      218
    4. 4
      Xenon
      149
    5. 5
      Steven P.
      140
  • Tell a friend

    Love Neowin? Tell a friend!